Engineering Materials

3D Printing & Robots at MD&M West

Page 1 / 2 Next >
View Comments: Oldest First|Newest First|Threaded View
<<  <  Page 4/4
Charles Murray
User Rank
Re: baxter
Charles Murray   3/1/2013 6:07:31 PM
It's also easy to see why the power tool industry resists the technology, William K. The idea of implementing this technology raises the possibility of having to invest gigantic amounts of capital to re-tool their existing production lines.  

William K.
User Rank
Re: baxter
William K.   3/1/2013 10:12:44 PM
Even more than changing the production lines, that sawstop works at the expense of saw functionality. Consider that it stops the blade with a ridgid stop lever jammed into the swas teeth. So it does stop fast enough to prevent an injury , which is within one tooths distance on the blade. So the blade attachment may be damaged, and for sure the blade is sort of reshaped a bit, and that expensive stop actuator must be replaced, since the high presure charge has been used. So your saw is out of business until the expensive part is replaced. That may be OK for a home experimenor but it will be a big problem for folks using the saw for making a living. Then there is the question about what if you don't replace the driver, but instead just remove it. That means that you have defeated a safety device, and can be attacked by the OSHA man.

So while the sawstop is an interesting device, it is a big burden as well. Next question is how many folks do cut off fingers every year? Not that many, I don't think.

Ann R. Thryft
User Rank
Re: Bone rasp or industrial tool?
Ann R. Thryft   3/5/2013 11:51:32 AM
78RPM, I agree about 3D printing making stuff that's too complex to do any other way. That's definitely one of its big draws. BTW, the photo in this story doesn't show the $70 titanium part that bone grows around; that's an acetabular cup. The photo shows a titanium bone rasp for hollowing out femurs, as the caption states.

Ann R. Thryft
User Rank
Check out our post about a Design Ideas Forum
Ann R. Thryft   3/7/2013 12:43:05 PM
Folks, the discussion here about SawStop potentially being applied to robots working with humans gave me an idea. Please check out this post about possibly starting a Design Ideas forum and tell us what you think: http://www.designnews.com/author.asp?section_id=1392&doc_id=259964

<<  <  Page 4/4
Partner Zone
More Blogs from Engineering Materials
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Plastics designed for use in medical devices and hospital equipment have to do multiple jobs, as is made clear in an article in our sister publication MDDI.
Arevo Labs has developed a new filament 3D printing process for making very high-strength PEEK- and PAEK-based carbon fiber composites, and the commercial service is now available.
Some of the biggest challenges for adhesives that join multiple materials are coming from consumer electronics, especially mobile and wearable devices.
Whether it's the outside of an aircraft, the inside of an electronics module, or the surface of heavy-use industrial flooring, these coating and sealant materials are suitable for the job.
Design News Webinar Series
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/29/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
12/2/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service