HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

Metal/Plastic Car Wheel Boosts MPG

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
<<  <  Page 2/4  >  >>
Elizabeth M
User Rank
Blogger
News to me
Elizabeth M   2/11/2013 11:55:53 AM
NO RATINGS
Thanks for covering this, Ann. While power-train and alternative fuel research is well-known and well-covered, I had no idea research into wheels also was being done to boost MPG on automobiles. It's quite interesting to read about and I am consistently impressed by the multifaceted work designers and engineers are doing.

Rigby5
User Rank
Gold
Way too much waste
Rigby5   2/11/2013 3:38:37 PM
NO RATINGS
While lighter wheels are nice, what I would prefer to see instead is for cars to get rid of all the electric motors for seats, door locks, windows, heat controls, etc.

Manual operations not only weight far less, but are far more reliable and cheaper to maintain.  If customers were actually told that things like keyless entry and remote start required leaving radio receivers on all the time, I doubt anyone would actually still want these silly features.

Thinking_J
User Rank
Platinum
always a compromise.....
Thinking_J   2/11/2013 5:02:36 PM
NO RATINGS
The compromise: reduced cross flow = less cooling of brakes.

On most consumer cars the impact would likely be minimal.

On my car.. well, let's just say I like "spirited" driving on mountain roads.

At "Indy" a number of years ago.... they were noting other trade offs relating to the wheel design. Specifically the affect on handling at high speeds when the wheel was optimized for minimal drag, the wheels would start acting like forward "rudders" during high speed turns - making suspension tuning kinda weird.

 

 

bobjengr
User Rank
Platinum
METAL/PLASTIC WHEELS
bobjengr   2/11/2013 6:12:23 PM
NO RATINGS
Excellent Post--I think this is the way highway mileage improvement will occur-in an incremental fashion.  I know from previous posts, automotive companies are working on many projects to meet the new Federal guidelines coming quickly.  I have been following with great interest materials that are lighter yet as strong as ones now being used.  I feel the metal/plastic wheels represent a great breakthrough. 

Ann R. Thryft
User Rank
Blogger
Re: Huge improvement
Ann R. Thryft   2/11/2013 7:56:06 PM
NO RATINGS
Thanks for weighing in, Chuck. The amount of MPG saved is one of the main things that attracted me to write about this. Also the fact that these guys have done their homework with 3rd-party testing, and at the same facilities, as automotive OEMs.



Ann R. Thryft
User Rank
Blogger
Re: Huge improvement
Ann R. Thryft   2/11/2013 8:02:21 PM
NO RATINGS
tekochip, one of the things that made me want to write about this wheel design was the fact that in other stories about alternative wheel materials some have commented about how much aerodynamics, as well as less weight from lighter materials, could add up to better performance.



Ann R. Thryft
User Rank
Blogger
Re: Cost Benefit
Ann R. Thryft   2/11/2013 8:14:04 PM
NO RATINGS
The whole point is the 1.1 MPG saved. There are no other wheels that can do that, so a monetary cost savings comparing this wheel to others that can't save 1.1 MPG wouldn't be very useful.

William K.
User Rank
Platinum
Re: Way too much waste
William K.   2/11/2013 9:01:53 PM
NO RATINGS
Not only is remote start a silly accessory, it is a source that delivers 100% on pollution, since the car warming up driverless for half an hour, or even just 15 minutes is just burning fuel delivering no travel value at all. All the warmup time the engine really needs is the time that it takes me to fasten my seatbelt after starting the engine.

William K.
User Rank
Platinum
Metal and plastic wheel
William K.   2/11/2013 9:12:09 PM
NO RATINGS
This new wheel design looks like it keeps the same flaw that most aluminum wheels carry, which is that they corrode and develop rim leaks. That may not be a problem in south cal, but here in Michigan there are tons of salt dumped at the first hint of snow, and it is far worse then the navy salt-spray test could dream of being. So  wheel with a good plastic in the seal area would be an improvement indeed. I really find it hard to believe that the streamlining gives a 1.1MPG improvement, or even a 1.1% improvement, unless it is being compared to the most non-aerodynamic design made. 

One other question is about how the plastic portion holds up with the fairly common problem of disk brakes binding and getting really hot. That happens a bit with some Chrysler product vehicles, I have found. They knew about that problem in 1976, they have not solved it by 2005. Reduced it some, but not solved.

William K.
User Rank
Platinum
Metal and plastic wheel
William K.   2/11/2013 9:12:33 PM
NO RATINGS
This new wheel design looks like it keeps the same flaw that most aluminum wheels carry, which is that they corrode and develop rim leaks. That may not be a problem in south cal, but here in Michigan there are tons of salt dumped at the first hint of snow, and it is far worse then the navy salt-spray test could dream of being. So  wheel with a good plastic in the seal area would be an improvement indeed. I really find it hard to believe that the streamlining gives a 1.1MPG improvement, or even a 1.1% improvement, unless it is being compared to the most non-aerodynamic design made. 

One other question is about how the plastic portion holds up with the fairly common problem of disk brakes binding and getting really hot. That happens a bit with some Chrysler product vehicles, I have found. They knew about that problem in 1976, they have not solved it by 2005. Reduced it some, but not solved.

<<  <  Page 2/4  >  >>
Partner Zone
More Blogs from Engineering Materials
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
GE Aviation not only plans to use 3D printing to mass-produce metal parts for its LEAP jet engine, but it's also developing a separate technology for 3D-printing metal parts used in its other engines.
The demand for solar energy around the world will grow a total of 75% by 2019, according to a new report by Lux Research. Trade disputes and policy changes, though, will complicate the picture.
Bayer MaterialScience is using CO2 to produce a precursor for high-quality polyurethane foam at its pilot plant in Leverkusen. The transition to full-scale manufacturing is expected in 2016.
Plastic bags can become useful as either raw materials for plastics or feedstock for fuel. It's when they're not recycled that they become a major problem. That's what California's bag ban will prevent.
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service