The proposal also provides incentives for biofuels with no or low emissions from ILUC. The EC especially wants to encourage second- and third-generation biofuels that are produced from feedstock, such as algae, straw, and various types of waste. These don't create additional demands for land and will contribute proportionately more toward the target of 10 percent renewable energy in transport fuels.
One major study indicating problems with the environmental friendliness of biofuels was conducted recently by Empa, the Swiss Federal Institute of Technology's materials science and technology laboratory. It concluded that only a few are more sustainable than petroleum-based fuels.
In many cases, although agriculture-based feedstocks cause fewer greenhouse gas emissions, they lead to other problems, such as increasing soil acid or pollution from fertilizer. Although biofuels from ethanol tend to have a better ecobalance than oil-based fuels like palm or soybean oil, results in each case depend on manufacturing method and fuel technology.
The study points out that environment assessment methods have been refined and better developed during the same time period that second-generation biofuels have been created, along with more innovative production methods.
With that cumulative perspective, it shouldn't be a surprise that first-generation food crop-based biofuels aren't such a great idea, because they not only affect food and feed crops, but may also be harmful in other ways. Other plant-based biofuel feedstocks, such as algae, may prove to be a lot less impactful on the environment.
This is an interesting situation. I really thought that the reason for the EU to limit biofuels was that there are food shortages from the drought in the US that have driven up the cost of basic foodstuffs. The issue of using land that was not under cultivation is a really imprecise measure. This happens in the realm of food production all the time depending on market conditions. For example, in the US, peanut production was at an all time high this year. The reason is two fold. First, crops were down and prices up in the previous couple of years. So, more land was put into cultivation. There was also a very high yield becuase the regions where peanuts are grown had lots of rain this year. In the EU, there are major distortions caused by the Common Agricultural Policy (CAP). This has nothing to do with fuel production. In the US we have our farm policy. In both cases we have been paying farmers for years to not grow cash crops to keep prices to farmers up. Now the market does that for us.
The alternatives are not all they are cracked up to be either. Algae would have to cover a large area to be useful. Are we ready for that? In addition, do the crops get credit for the CO2 they absorb while they are growing? This would be an interesting calculation. I have seen oil refineries and I have seen ehtanol plants. Is the CO2 from the oil refineries in the calculation? What about the transport of oil around the globe. Ethanol tends to be used near where it is distilled.
Any real comparison should take into account the whole cycle of production, including the equipment. I don't think we have seen that done for oil, or ethanol, in a comprehensive manner.
Good point on taking in consideration the whole cycle of production on the biofuels, Naperlou. That's the only want to get a good comparison. Another example is the steel industry's claim that composites eat more energy than steel during processing, and that steel costs less to recycle.
Great article which takes a deeper dive into biofuel reality. As we gain more experience with biofuels, some of the intial economic perceptions that we had will continue to need adjustment. As we use entire life-cycle carbon and cost calculations, surprising numbers will continue to be found.
Like anything with broad ranging economic as well as ecological impacts, it quickly becomes very complicated. Also, how you tune multi-parameter systems depends on what you wish to optimize. From an economic point of view, biofuels have an attraction to net importers - every time a country imports oil it exports cash which drags down its currency making all imports more expensive and this is a persistant economic impact since a one time purchase exerts this pressure until the cash is repatriated. On the other hand, biofuel from foodstocks seems a crazy idea given the context of declining oil, increased demand for fuels and increasing demand for food based on population growth - when you do a little of this, it's not a problem but when you project forwards, it could be a form of population control. One ecological effect is that biofuels are naturally cleaner than the stuff that comes out of the ground, especially as extraction shifts towards unconventional sources. The US started into corn ethanol partly as a step towards security and to plump US agriculture. Overall, its not a really smart approach as the total energy input required to produce it is nearly 6 times the net energy produced. By comparison, European production of ethanol from root crops is significantly more energy efficient while Central and South American production from sugar cane is very much more energy efficient and produces a cheaper product. The US plan was obviously mainly directed at assisting domestic production given the major efforts to restrict imports of inexpensive ethanol from countires like Brazil which already have a well developed biofuel economy. From a carbon budget perspective, fossil fuels take carbon that was more or less permanently sequestered and releases it into the environment while biofuels recycle the carbon that is already in the atmosphere and oceans and the biosphere slightly distorting the balance between them but not adding to the total.
Is it possible that the Europeans have seen the light? While they may make the public pronouncement why they are considering alternatives to "food" sources for fuel, could it be that this is just a mask to restrict outrage from the far left that has been at the forefront in demanding the use of these raw materials into fuel supplies? Maybe they've seen the astronomical rise in the price of a bushel of corn in the U.S., since we've gone to ethanol supplements, AND maybe they're beginning to reel seriously from their recent catastrophic directives of ROHS, etc.
As more conservative leaders in Europe emerge, they may be attempting to shift the thinking to an incremental approach to change, instead of a revolutionary approach to change. Just as you cannot stop a rolling steam engine on a dime, so too you cannot stop an entire economy or process on that same dime! It just may be that someone has calculated the tillable land available in the greater European Continent, and decided that it would be too extreme to commit more of this arable soil to production of biofuel sources than human food production.
" the steel industry's claim that composites eat more energy than steel during processing, and that steel costs less to recycle." -- ah, the complexities of the problem. This argument shows that if you choose to optimize on specific components you can come up with huge fails. The first rule of optimizing a system is to avoid local optimization. When it comes to minimizing total energy use, composites win by a large margin. Aluminum is awful but gets quite a bit better because of low energy intensity and environmental impact when recycled: ~5% energy recycled to raw. Steel is never a challenger for anything as it is less malleable and less stable - particularly it's environmental impact because of chemical processes needed to make a finished product. Recycled steel uses ~26% of the energy for raw steel. Having worked with composites, steel and aluminum for automotive and aircraft construction, I'm not sure what 'processing' they're even talking about - the heat load required to form and shape composites is much smaller than for the other two. Of course, if you were to consider the lifetime energy consumption of transportation products, composites and aluminum have a substantial energy use advantage over steel. One should also consider material turns i.e. what is the lifetime of the material in use, because, in the long view, the more frequently a material is recycled, the more energy it uses. One of the technical problems with sourcing aluminum, especially extruded or cast components, is that the majority of the price is energy content. Of course, the contribution of steel to acid rain is well known.
It is always interesting to see what happens when the unanticipated results of decisions made based on emotion instead of logic become a bit more obvious. The short term problem of bidding up food prices is only one aspect that should have been expected. It will be very educational to see where the EU winds up after the full reality of their choices becomes clearer.
It may be a bit like the consequences of that ROHS set of rules, which have caused quite a few unintended results. Once again, acting on emotions instead of facts does cause problems.
It's too bad that it's taken six years since the global food crisis began for the role of biofuels to be publically recognized by policymakers. That's six years too late for millions of people in the developing world. But at least this problem is finally being taken seriously.
I think GeorgeG's points are very well-taken. Although my article discusses European issues, the biofuel-and-food-crops situation is a global one, and anything that far-reaching is complex, with multiple parameters and multiple variables. Plus, as Greg mentions, our tools have become more fine-tuned. Although we might prefer it otherwise, alternative solutions have had to be tested in the field, so to speak, before we could get to this point in our understanding.
Thanks for that detail, George. In the study on steel I read, it wasn't specific about what was meant by "processing." I would guess that is pretty much everything that happens from raw materials to vehicle manufacturing.
The 100% solar-powered airplane Solar Impulse 2 is prepping for its upcoming flight, becoming the first plane to fly around the world without using fuel. It's able to do so because of above-average performance by all of the technologies that go into it, especially materials.
As the 3D printing and overall additive manufacturing ecosystem grows, standards and guidelines from standards bodies and government organizations are increasing. Multiple players with multiple needs are also driving the role of 3DP and AM as enabling technologies for distributed manufacturing.
A growing though not-so-obvious role for 3D printing, 4D printing, and overall additive manufacturing is their use in fabricating new materials and enabling new or improved manufacturing and assembly processes. Individual engineers, OEMs, university labs, and others are reinventing the technology to suit their own needs.
For vehicles to meet the 2025 Corporate Average Fuel Economy (CAFE) standards, three things must happen: customers must look beyond the data sheet and engage materials supplier earlier, and new integrated multi-materials are needed to make step-change improvements.
3D printing, 4D printing, and various types of additive manufacturing (AM) will get even bigger in 2015. We're not talking about consumer use, which gets most of the attention, but processes and technologies that will affect how design engineers design products and how manufacturing engineers make them. For now, the biggest industries are still aerospace and medical, while automotive and architecture continue to grow.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.