The one-piece CR-9 front wheel weighs 7kg (15.73 pounds), has a rim diameter of 19 inches, and attaches to metal hardware with a patented joint system under dynamic loading conditions. (Source: Carbon Revolution)
Looks like a really important development effort. Not only does the wheel help with the lightweighting strategies of automotive OEMs, I'd say it's still pretty good looking. Given that style is such an important element of car selection, I'd say any kind of modifications to materials or appearance in the name of lightweighting vehicles still has to have an appeal to consumers and I think this example satisfies both.
Paraphrasing Henry Ford (regarding the Model T) and applying it to carbon fiber: You can have any color you want, as long as it's black.
I predict riches for the developer of non-black carbon fiber. Sure, you can paint it. But if the color is part of the material, a process is saved. Finishes wear off too.
A better way of saying it might be: Beauty, in this case, is more than skin deep.
I wonder about true real world impact testing on a carbon fibre wheel.
See the old steel rims could take a curb or nasty detroit pot-hole and you could drive off with a dent in the rib. The tire might leak some air on the way home. A mallet or a torch and you could get it back into shape.
The aluminum wheels are usually pretty good, but occasionally I've seen a pot-hole crack the aluminum and the wheel is toast. I've seen people weld aluminum rims, after damage, but I'd stay away from that.
Carbon fibre is brittle and shatters. I envision hitting a curb or nasty pot-hole and having the entire wheel splinter into shards. Most of us have seen carbon fibre at the race track and what happens during impact.
TJ, I think you've got a great point there. Red? Electric blue? Magenta? Daffodil yellow? OTOH, I'm not sure if that's physically possible, since carbon is, well, black.
Sven, I think your concerns are real, but so is the crash-worthiness testing of carbon fiber made for high-volume automotive apps. Not all carbon fiber composites are made in the same way. Stay tuned for my upcoming September feature on this topic.
Sorry had to edit this. Browser I was using to reply left all the spaces out.
I look forward to it! I love technology, and I imagine there will be a huge safety factor put in. I just keep having visions of things like the time Kimi Raikkonen was on his way to win an F1 race and his rear wing let go. It put up with several G's down force--until it didn't--then it was instantly obliterated. Ductile metals have a forgiveness as they are over loaded they fail and stretch and deform until becoming unusable. Carbon fibre is so strong but past the yield point it seems its almost instant fail. In concrete we use rebar to offset the brittleness. Maybe this carbon fibre will have some stretchy/bendy fibres???
The only impossible thing is skiing through a revolving door.
If there's incentive enough, a chemist and the company backing him are going to be very rich.
You've forgotten carbon comes in several forms (cough cough diamond cough cough). It's clear, fiber's been black all this time. Surely there's some room in the middle for a bit of color. Maybe the fibers are carbon nano-tubes, and the interiors can be filled with a colored element.
I wish I had the capital. I see a mint in the making.
Gee, I don't know - why would you pay the price for carbon and then not show-it-off? Isn't that part of the glamour? I do know that people have added pigment to the resin on some carbon assemblies. It is, after all FRP, so you can make the plastic any color you want. I'm much more impressed with the fastenings. So far, if you want to connect a carbon fiber assembly to something, you must either bond it, or use fasteners which typically create such high point loads that the carbon assembly fractures. There is great potential in this technology though I'd guess cost will be the major factor in implementing it.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
The latest model of Liquid Robotics' Wave Glider autonomous, unmanned marine vehicle (UMV), the SV3, is reportedly the world's first hybrid wave- and solar-power-propelled unmanned ocean robot.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
