A new type of plastic that mimics human skin changes color first to show damage from cuts and scratches, then heals itself when exposed to light or changes in temperature or pH.
(Source: Professor Marek W. Urban, University of Mississippi)
William, thanks for your comment. I agree with you about this not being likely for consumer-grade use. We addressed this issue earlier in the thread: since this is not close to commercial development yet, price and cost differentials are unknown. But self-healing plastics like this one--which unusually can self-heal multiple times--multiply the life of the object several times. Less plastic gets used during that time, so the COO to manufacturers would be lower than buying it once. It's not aimed at high-volume, low-cost throwaway applications, but ones where continued use of a high-value product is important, such as military or medical products.
It would be quite useful to know some of the more common materials propertiies of this self healing material, such as strength, stiffness, and temperature ratings, and that all important property, PRICE. My guess is that it would never be found in consumer goods evenif the cost were half that of styrene regrind. It appears that many consumer goods have avery intentional low quality level, so that they would be replaced every few months.
ChasChas, thanks for that comment. I agree with you. I've reported on several other experimental materials that seem to be moving toward intelligence, some of them via nanotechnology, and many of them based on shifts in electrical charge.
Nadine, thanks for the clarification. Since this material is aimed at self-repairing surface damage, I don't think it's designed for implants. But that's an interesting idea. There are many biocompatible plastics made for that application, and designing one of those to be self-healing would be a good PhD project.
Ann: I'm thinkiing specifically about joint replacement. I had the honor to attend an orthopaedic surgeons conference a few months ago. The technology is very interesting and has been making slow advances, especially in hip replacements. Even temperature and PH changes would be problematic for spine, knee and hip replacements.
But, it may cause less trauma than entirely replacing the unit.
Mydesign, most countries are trying to find alternate feedstocks for plastics, like bioplastics, and/or design plastics that are compostable or recyclable, as I've written about here
Meanwhile, these new plastics are only a drop in the huge bucket of the amount of plastics we consume. So extending the life of non-recyclable, non-compostable plastics by reusing them helps keep them out of the landfill.
Nadine, intense light is one possible exposure mechanism--the article also mentions changes in temperature or pH. I'm not sure why strong light would be a problem for an implant, since an implant is usually kept away from light. Can you tell us more about what you mean?
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
