As we showed you in a recent slideshow, some NASA scientists envision astronauts making whatever they need out of local materials on Mars or the moon via 3D printing. While technology from organizations like Contour Crafting has made this theoretically possible, now, Washington State University (WSU) engineers have actually used moon rocks to print some simple-shaped objects -- on Earth.
Real moon rocks are too rare, so researchers are using an imitation moon rock called lunar regolith simulant. Regolith is a mixture of loose dust, rock, and soil that covers solid bedrock on earth, as well as other planets, the moon, and some asteroids. The simulant is formulated to approximate the real lunar regolith's chemical and mineral properties. There are several versions. The WSU team used about 10 lb of one version that contains silicon, aluminum, calcium, iron, and magnesium oxides.
Washington State University engineers have 3D-printed some simple-shaped objects using a simulant of lunar regolith, a mixture of loose dust, rock, and soil that covers solid bedrock. Shown here, Apollo 16 astronaut Charlie Duke drives a core sample tube into the lunar regolith. (Source: NASA)
A team that includes Amit Bandyopadhyay and Susmita Bose, professors at the university's School of Mechanical and Materials Engineering, has demonstrated the printing of parts from the raw, artificial moon rock. NASA is working with several organizations, including Contour Crafting, to develop the technology for fabricating simple tools or replacement parts, but Bandyopadhyay's group is the first to demonstrate the ability.
Previously, Bandyopadhyay and Bose had used 3D printing to create bone-like materials for use in orthopedic implants. Their current work uses Laser Engineering Net Shaping (LENS) technology, specifically, LENS-750 systems. These are based on laser sintering, the most common additive manufacturing method. The team published its results in an article in the Rapid Prototyping Journal.
According to the article abstract, the team produced dense parts with no macroscopic defects, which they characterized to evaluate how laser processing affected the lunar regolith simulant's microstructure, constituent phases, and chemistry. Characterization was done using X-ray diffraction, differential scanning calorimetry, scanning electron microscope, and X-ray photoelectron spectroscopy.
Although the laser processing did cause marginal changes in the material's composition, after some trial and error, the researchers managed to produce parts that did not crack when they solidified.
The team has sent its results to NASA. Other team members include Vamsi Krishna Balla, also with WSU's School of Mechanical and Materials Engineering; Luke B. Roberson, of NASA's Kennedy Space Center; Gregory W. O'Connor, of Amalgam Industries; and Steven Trigwell, of ASRC Aerospace Corp. The research was supported by a $750,000 W.M. Keck Foundation grant.
In the video below, Bandyopadhyay shows the regolith material and explains that the technology can also be used onsite to repair broken parts. The achievement, he says in the video, is a first-generation work that will probably not be ready for commercial use for another 50 years or so.
I suspect it may not take that long, considering how fast this technology area is advancing. NASA is already working on 3D printing rocket engine parts, and other researchers have figured out how to 3D print entire personal electronic devices. The two biggest challenges in printing objects from moon rocks seem to be figuring out the best combination of laser sintering processing and moon rock material, plus, making small printers that will work in a zero-gravity environment.
emneumann, thanks for the comments, and glad you liked the article. Unfortunately, we *have* used up many, perhaps even most, sources of raw native ores. Scrap and reclaimed metals are by no means easily reusable at the same strengths as when originally forged. Aluminum makers claim theirs is, but as usual, that depends on several variables. The dystopic scenarios are not confined to science fiction.
I'd like to point out that the materials upon which our technology is based aren't consumed and made to be unusable once they have been incorporated into our machines and infrastructure. That is to say, we have not "used up" the iron, aluminum and other raw materials and they will be more accessible to future post dark age humanity that they were to our ancestors. They will just be in other places and not in their native ores. They will be in land fills, salvage yards and in the infrastructure concentrated in urban areas. In fact, many of them will be in a form much more recognizable as useful to people in a dystopian future than they were the first time we dug them out of the ground. Granted, fossil fuels will be much harder to find but that should be the only resource disadvantage to future peoples trying to build a technological society from scratch.
This reminds me of the folks who think money spent on space exploration disappears into the vacuum of the void with the few insignificant pounds of materials that we actually send into space. That money feeds into the economy and allows many people to feed their families, pay their mortgages, etc. and is in no way a waste or lost forever.
ChasChas, minerals are not to be dismissed--and they are also found on the moon. If a widescale disaster happened here on Earth, as in sci-fi novels and movies, and all cultures got sent back to the stone age, it would be really difficult to re-create current conditions primarily because we've used up most of the Earth's minerals that were available via mining, to forge metals. Those metals are what we used to build machines, including the ones that then built other materials. The history of industrial technology is an interesting and instructive study.
I have to agree. I never thought of all of the things you would have to do without while being up there. It's not like you can just go down the street and pick up a screw at the local hardware store.
Jim, thanks for your insider information on the subject. Here's hoping we have a good reason to go back to the moon to take advantage of this and other developments.
Greg, most of what I've read mentions simple tools and replacement parts would be the prime candidates. But then there's also the idea of making structures, like Contour Crafting has proposed http://www.designnews.com/author.asp?section_id=1392&doc_id=250614 JimG, thanks for weighing in with your direct experience. I think this is a very promising and exciting area to be working in.
If you mine the regolith on the moon's surface, there are actually quite a bit of materials that can be processed. Different locations on the moon will result in different percentages in composition. My employer, Teledyne Brown Engineering (TBE), has worked with Marshall Space Flight Center (MSFC) on In Situ Fabrication and Repair (ISFR) where we looked at using lunar regolith as a feedstock for additive manufacturing as well as other complementary projects. We specifically looked at the EBM process. With the EBM using a vacuum in their build chamber, the lunar environment is an excellent one. We have looked at mining oxygen from the lunar surface and using the waste products from this process (metal oxides), converting it to powder, and using it as the feedstock. It is certainly possible. There is titanium and other metals available on the moon.
We have looked at mining this material, as well as combining all metal "waste", and also looking at the lunar regolith. We did this work 4-5 years ago using a couple different simulants. We made some brick samples using lunar simulant along with a binder. The funding stopped and we could not continue this work. The funds were re-directed to more short-term work such as building a new rocket to replace the shuttle fleet! Other areas of interest included non-destructive inspection of additive manufactured parts such as Microwave and millimeter wave nondestructive testing and evaluation methods. We looked at post-processing these AM parts to arrive at acceptable tolerances. We even looked at growing biological parts as well as producing electrical components such as PC Boards and discreet components.
I'm glad to see additional work being done in this area. We spent 4-5 years working on everything from a lunar base to documenting possible existing parts on the ISS that could be replicated using additive manufacturing in space. NASA is very interested in looking at in situ manufacturing and this work will help make it happen. We worked with the Contour Crafter in building habitats and building launch/landing sites.
This was some really fun work. Hopefully, we can get the project going again and help make some significant progress!
Greg, to answer your other question concerning what components will be fabricated first, you have to decide what spares make sense to bring with you. In some cases, the upmass makes sense to bring the spares. I think the first things to fabrciate may be simple tools or unique tools made for specific applications. Additionally, the exercise equipment is always in need of repair on the ISS so I could see some repair parts for the crew health equipment.
Ann, did you get a sense of what types of components will have the first priority for fabrication on the moon? I would imagine that the limited material available will also limit the variety of parts that can be fabricated.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
The latest model of Liquid Robotics' Wave Glider autonomous, unmanned marine vehicle (UMV), the SV3, is reportedly the world's first hybrid wave- and solar-power-propelled unmanned ocean robot.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
