Designed for a polymer automotive front grille, this aluminum mold made by DRS Industries includes complex angles, eight slide/lifters, and a three-drop custom manifold. Featuring a Class A surface and an automotive specification grain where required, it demonstrates the abilities of aluminum tooling to make large, injection-molded parts.
How else can you design a part to be manufactured without understanding the capabilities and limitations of the manufacturing process? Evidently it has been done, but it doesn't make sense. It seems that others have thought differently over the years, which is probably the basis for the whole "DFM" group of consultants who try to solve problems for those designing hard to manufacture parts.
Injection molding has been one of those areas where the first step of part design has been to determine the capabilities needed to produce the part features while designing those same features. That would determine which supplier was selected as well as what features of the part could be included. An analogy is deciding what one would ,ake for dinner based on what food was on hand and what was available to cook it with.
Theoption of including secondary operation types of actions while the part is molded is quite interesting, and it would allow a number of additional options for the initial design process.
The use of Scientific Molding is a great way to produce repeatable parts on multiple machines. Documentation of separation of pack and hold as well as a documented gate seal study helps to produce parts consistently on different machines.
In regards to aluminum tooling, what is the effect of glass filled reins on the aluminum mold? Often times, it is necessary to use glass filled resins for metal replacement projects.
Ann, I assume your statement regarding aluminum or steel in the first paragraph is incorrect considering the text of the rest of the article. It is an interesting one, by the way. Recently there was an article on this site on Metal Injection Molding (MIM), which had a poor reputaiton, but has seen great improvements.
One observation is about the statement about increased pressure on manufacturing. This is a common statement, so my comment is not aimed at your article, particularly. There would be no increased pressure without advances in science and engineering. The statemnt seems to imply that these industries are standing still and being pushed by someone else. In reality US industry is among, if not the most , efficient in the world.
Another interesting point in your article is about the Scientific Molding process. I once worked for a company that made simulators, primarily for training. These included flight, military as well as industrial simulators. In general, the simulators were very accurate. They could often be driven faster than real-time. A secondard market was found for the industrial simulators in plant control. The simulator could run many scenarios with different feed stocks, etc. This would allow adjustment to the process before acutally consuming anything.
Finally, your article points out the need for design for manufacturing. Before the move toward outsourcing, there was a move toward integration. If you could design a part to be more easily manufactured, and you did it in the design phase, it was a very inexpensive change. If this had to be addressed later, it would be very costly. Perhaps we are moving back.
I heard an example of this recently. A manufacturer of space heaters, I think it was, brought their manufacturing back to the US. By a small redesign, one that eliminated a lot of fasteners, they were able to lower the time to manufacture. Since their market was mostly here, and since they could make changes to respond to market conditions more quickly, they have improved their competitiveness. A god example, I think.
Norway-based additive manufacturing company Norsk Titanium is building what it says is the first industrial-scale 3D printing plant in the world for making aerospace-grade metal components. The New York state plant will produce 400 metric tons each year of aerospace-grade, structural titanium parts.
Siemens and Fraunhofer Institute for Laser Technology have achieved a faster production process based on selective laser melting for speeding up the prototyping of big, complex metal parts in gas turbine engines.
BMW has already incorporated more than 10,000 3D-printed parts in the Rolls-Royce Phantom and intends to expand the use of 3D printing in its cars even more in the future. Meanwhile, Daimler has started using additive manufacturing for producing spare parts in Mercedes-Benz Trucks.
SABIC's lightweighting polycarbonate glazing materials have appeared for the first time in a production car: the rear quarter window of Toyota's special edition 86 GRMN sports car, where they're saving 50% of its weight compared to conventional glass.
Design engineers play a big role in selecting both suppliers and materials for their designs. Our most recent Design News Materials Survey says they continue to be highly involved, in some ways even more than the last time we asked to peek inside their cubicles.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.