The award-winning Ford Escape instrument panel design has a complex geometry with changing wall thicknesses, making it difficult to meet required mechanical properties using solid injection molding processes. Creating the panel in the MuCell microcellular foam process reduced weight by more than 1 lb, improved mechanical properties, reduced cycle time, and lowered the part’s cost by $3 per car.
How else can you design a part to be manufactured without understanding the capabilities and limitations of the manufacturing process? Evidently it has been done, but it doesn't make sense. It seems that others have thought differently over the years, which is probably the basis for the whole "DFM" group of consultants who try to solve problems for those designing hard to manufacture parts.
Injection molding has been one of those areas where the first step of part design has been to determine the capabilities needed to produce the part features while designing those same features. That would determine which supplier was selected as well as what features of the part could be included. An analogy is deciding what one would ,ake for dinner based on what food was on hand and what was available to cook it with.
Theoption of including secondary operation types of actions while the part is molded is quite interesting, and it would allow a number of additional options for the initial design process.
Interesting point on the improved mold performance using aluminum due to its improved thermal conductivity. Do you know what type of aluminum they used? (QC-7?)
The use of Scientific Molding is a great way to produce repeatable parts on multiple machines. Documentation of separation of pack and hold as well as a documented gate seal study helps to produce parts consistently on different machines.
In regards to aluminum tooling, what is the effect of glass filled reins on the aluminum mold? Often times, it is necessary to use glass filled resins for metal replacement projects.
Ann, I assume your statement regarding aluminum or steel in the first paragraph is incorrect considering the text of the rest of the article. It is an interesting one, by the way. Recently there was an article on this site on Metal Injection Molding (MIM), which had a poor reputaiton, but has seen great improvements.
One observation is about the statement about increased pressure on manufacturing. This is a common statement, so my comment is not aimed at your article, particularly. There would be no increased pressure without advances in science and engineering. The statemnt seems to imply that these industries are standing still and being pushed by someone else. In reality US industry is among, if not the most , efficient in the world.
Another interesting point in your article is about the Scientific Molding process. I once worked for a company that made simulators, primarily for training. These included flight, military as well as industrial simulators. In general, the simulators were very accurate. They could often be driven faster than real-time. A secondard market was found for the industrial simulators in plant control. The simulator could run many scenarios with different feed stocks, etc. This would allow adjustment to the process before acutally consuming anything.
Finally, your article points out the need for design for manufacturing. Before the move toward outsourcing, there was a move toward integration. If you could design a part to be more easily manufactured, and you did it in the design phase, it was a very inexpensive change. If this had to be addressed later, it would be very costly. Perhaps we are moving back.
I heard an example of this recently. A manufacturer of space heaters, I think it was, brought their manufacturing back to the US. By a small redesign, one that eliminated a lot of fasteners, they were able to lower the time to manufacture. Since their market was mostly here, and since they could make changes to respond to market conditions more quickly, they have improved their competitiveness. A god example, I think.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
The airframe of Airbus's A350 XWB consists of a bigger proportion of carbon-fiber-reinforced composite structures than any other commercial jet to date: over 53 percent by weight.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
16 
