First Civil Jet Flies on 100 Percent Non-Food Biofuel
Canada's National Research Council and the Canadian Space Agency have used the Falcon 20 jet, with modified hydraulic and aircraft fuel systems, for performing parabolic flight maneuvers in microgravity experiments. (Source: Canadian Space Agency)
Excellent Post Ann. I think this is a great step in the right direction. Every engineer realizes we are years away, if ever, from eliminating our complete dependence upon fossil fuels BUT, advances such as this can insure we maintain usable quantities for future generations. Finding a suitable substitute for food grade biomass is truly a significant breakthrough. As with every thing else, I suspect the cost will lessen as time goes by the technology to improve yields will increase. Again--great article.
Thanks for clarifying, jhankwitz. What will get costs down is higher volumes, which means we have to start somewhere. I think this is one of those areas where government can help, and apparently the Canadians (and Europeans) agree.
jhankwitz, I don't know where you live, but I'm in California, with the highest gasoline costs in the nation. While I'd rather not pay more for anything--who would?--I pay more for gasoline without complaint knowing that we are meeting higher standards for clean air.
This is great news! Advancements in bio fuel are the way forward for reducing dependence on oil and running cleaner vehicles across the board. Bravo to the airline industry for doing this type of research. I personally hope it leads to more success in the future and eventually the predominant use of this kind of biofuel. Thanks for covering.
I agree, Ann. The whole business of creating biofuels will likely go through many permutations before the industry settles on a few paths that are efficient and meet evolving regulations. This test, however, is just one more indication that there will be a significant biofuel industry.
Zippy, the smell of french fries may be prevalent in recycled cooking oil from restaurants used in cars with converted engines, but it's got nothing to do with commercial biofuels. Biofuels are derived from specifically grown crops, food-based or otherwise, produced with a variety of processes. To date, the main reasons biofuels have been blended with petro-based fuels have been a) performance and b) cost.
Ann, outside of the potential cost and availability issues, are there any technical reasons that a biofuel cannot be substituted 100% for aviation purposes? Other than the pervasive smell of french fries at the airports, of course... :)
Thanks, Rob. I think regardless of any other factors or considerations, the fact that this jet flew successfully on 100% biofuel is a very encouraging development. The jump from 30 to 50% in blends to 100% is insanely high, and a major first.
As the 3D printing and overall additive manufacturing ecosystem grows, standards and guidelines from standards bodies and government organizations are increasing. Multiple players with multiple needs are also driving the role of 3DP and AM as enabling technologies for distributed manufacturing.
A growing though not-so-obvious role for 3D printing, 4D printing, and overall additive manufacturing is their use in fabricating new materials and enabling new or improved manufacturing and assembly processes. Individual engineers, OEMs, university labs, and others are reinventing the technology to suit their own needs.
For vehicles to meet the 2025 Corporate Average Fuel Economy (CAFE) standards, three things must happen: customers must look beyond the data sheet and engage materials supplier earlier, and new integrated multi-materials are needed to make step-change improvements.
3D printing, 4D printing, and various types of additive manufacturing (AM) will get even bigger in 2015. We're not talking about consumer use, which gets most of the attention, but processes and technologies that will affect how design engineers design products and how manufacturing engineers make them. For now, the biggest industries are still aerospace and medical, while automotive and architecture continue to grow.
More and more -- that's what we'll see from plastics and composites in 2015, more types of plastics and more ways they can be used. Two of the fastest-growing uses will be automotive parts, plus medical implants and devices. New types of plastics will include biodegradable materials, plastics that can be easily recycled, and some that do both.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.