First Nanocomposite Manned Boat Will Fight Pirates
9/17/2012
The LRV-17, the first manned boat to be made primarily of nanomaterials, has an extended range of more than 1,500 nautical miles -- more than three times the range of similar-sized vessels. (Source: Zyvexz Marine)
Naperlou, these remind me of WWII PT boats, which were made out of plywood, and were fast. (Range and torpedos probably the biggest difference.
Some of these armament/drones etc. replies ignore both political reality, and reality in general. 'Pirates' look like fishermen. (With nicer, bigger outboard motors?) Shoot first, and ask questions later? How macho!
When you find out they are pirates, it may well be because they have sidled up to a boat, or even already have boarded one. Gonna spray that big tanker with a fifty? Kiss the crew goodby? I don't think so.
Do the pirates buy fifties for their boats? Heck, do they buy one of these boats?
Five years after these are deployed, pirates have quit, and these are no longer patroling. At which point the pirates start right up again?
I surely don't know how this will play out, but I thirst for more info about this boat and how it would be used. Sounds like it might pay for a lot of merchant mercenaries, riding right on the target ships. But that's probably a whole new can of worms.
Ken E. - I imagine that the firepower would consist of a series of options based on the actual missions of the customers. In fact, these might be aftermarket from other suppliers.
Armorment, though, is an interesting question. What happens when somebody shoots back? I have not heard any comparisons between these lighter materials and their ability to remain intact.
Even A single .50 BMG would get the point across. They wouldn't have to arrest anyone just defend the escorted ships. One of the main ships could serve as Command and Control and the small vessels would respond with intercepts and machine gun bursts. If you've ever been on the receiving end of .50 caliber fire you know how intimidating it is. Even a single hit on the types of boats the pirates use would be devastating.
My recommendation for fighting the pirates in that part of the world would be to use well armed drones and simply blast them out of the water. After a few hundred pirate vessels are sunk, possibly there would be some reduction in maritime piracy in that area. It is quite likely that the payback on the investment in drones would come within just a few weeks.
The fact is that it is hard to scare the pilot of a drone, since they are far away.
Much ado about extended range, but nothing about munitions or armor. Are they going to drive pirates away by merely looking badass?! Is this for recon, point of spear, or what? If they arrest 12 pirates, hows that get handled? Is it stealthy? Sold to the highest bidder?
Lou, I looked up the P-51 Mustang and that aircraft sounds like a good analogy to the boats escorting ships I describe. Regarding CNTs, they are showing up everywhere in composites to reinforce them: the resulting materials are called nanocomposites.
Ann, when you mention the longer range of these boats and the fact that this makes them a game changer in the business of escorting ships against an enemy, I am reminded of the P-51 Mustang. Their longer range made them able to escort larger bombers all the way to their targets. It was a technological improvement that made them able to do the job at the time. In the same way these boats incorporate improvements that let them do a job that was not really possible before. The carbon nanotubes are really interesting. I have seen them used in microelectronics where they are literally grown within the chip. It is very impressive. In that case they are able to tale larger electrical loads than standard conductors. In this case it is strength and light weight that is the attribute.
Fascinating article, Ann. I guess it shouldn't be surprising to find composites are working their way into boats. I also find it interesting that that goal is to prevent piracy rather than chasing the bad guys afterwards.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
