EOS filled materials that contain a hollow filler can reduce weight even more. Don Vanelli, president of EOS-owned Advanced Laser Materials, said:
For many years there wasn't much choice of filled materials on the polymer side: perhaps two or three, mostly nylon, with a choice of adding glass or aluminum as fillers. So we developed new polymers, as well as mixing, blending, or providing secondary processing to make them more usable for a specific application. We aim at low-volume production parts and single customized production parts.
EOS's aerospace customers are now fully utilizing a printer's capacity, helping to make parts less expensive. Vanelli said:
If I turn the machine on and build one part that uses only 10 percent of the space, I could theoretically add another nine parts to fill that space and increase efficiency. Laser sintering has become a viable way to make end-use parts, not just prototypes, so demand is increasing, and the cost is going down. Also, on the hardware side, machine scanning speeds and accuracy are going up, so the time to build a part is getting shorter.
Customers are finding they can do parts consolidation because of laser sintering, said Andrew Snow, director for EOS of North America. They can reduce the overall parts cost and secondary operations for assembly or finishing, or secondary welding and brazing operations. Although the machines are getting better and faster, adopting the technology can also dramatically reduce parts count and inventory.
For example, Northwest UAV Propulsion Systems and its sister company, Northwest Rapid Manufacturing, used EOS's FORMIGA P 100 plastic laser-sintering system to build a complete UAV generator set. The set consists of a combustion engine that drives an electrical generator. It increases fuel capacity with a plastic tank design that maximizes available space and incorporates both the fuel tank and its enclosure in a single part.
In other military applications with a medical slant, DARPA has bought some Stratasys printers for making scaffolds, rib spreaders, and other handheld medical devices used by doctors on the front lines. DeGrange said:
They want to see if it's possible to send a file to a printer in an Afghanistan tent city, build the tool in the machine, and make sure they're sterile. They're working with a special material that can compound particles such as silver into the plastic to kill bacteria.
In Stage 1 studies, DARPA is using Stratasys's uPrint machines to test the concept and the material, but wants to shift to smaller Mojo printers that can run off a HUMVEE's DC power. That would let the technology be deployed in mountains or other remote areas not only in tent cities. "We already have medical-grade ABS plastics that meet ISO 10993 guidelines, but users don't typically run those on the uPrint or the Mojo," said DeGrange. Being able to print on-demand sterile medical tools could also be valuable for disaster areas, search-and-rescue efforts, and first responders.
I agree--the fact that 3D printing, in all its variety, is now on the radar of so many people and organizations bodes well, as does the spread of machines, and more and more materials, across the different market segments.
Seems like the dual forces of interest from the DoD and the commercial business sector could do a lot to advance the cause of 3D printing and additive manufacturing well beyond where it is today. Couple that with all the activity on the consumer front and you've got the real makings of a market.
Thanks, Beth. The DoD's desire to make 3D printing accessible and useful for soldiers is apparently one of the main forces behind the formation of NAMII, the additive manufacturing initiative/consortium we covered: http://www.designnews.com/author.asp?section_id=1392&doc_id=251513
Nice indepth account of how 3D printing is really changing the game when it comes to creating production parts from a wide variety of materials and in a much shorter time span. Beyond the implications in the aerospace applications you mentioned, Ann, the experimentation going on to use less expensive and more portable 3D printers in army applications, in the field, as a means of helping troops with extra parts they need or more significantly medical care is really exciting.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
