A flexible inorganic, thin-film lithium-ion battery made of all solid-state materials delivers enough energy density to power this bendable display. (Source: Nano Letters)
Jim, thanks for acknowledging what a big deal flexible batteries are. You're right, I guess we tend to get distracted by the flexible displays. But the real innovation is in the batteries, and you've clearly described what they bring to portable electronics design.
Jim, it was only a half tongue-in-cheek comment. I was surprised to learn how roughly electronics are treated by some young people, especially DVDs. Gee, thanks for all those scratches on my rental movie! Since ruggedization of removable media and systems is costly, it's usually only the military and industrial versions of electronics that get that protection.
Charles, having the ability to create a new product architecture knowing the battery is no longer a rectangular block will allow product designers much flexibility. I've been developing hand-held and portable electronic products for a long time and the very first considerations to a products' overall size, weight and form-factor are (1) the battery and (2) the display. Defining those two elements is an 'up-front' task that must be thoroughly specified before you can begin product layout.
Regarding your question if flexible displays always require a flexible power source, well, no; not at all. But when concept products show-casing flexible display technologies first started showing up at CES about 10 years ago, the product architects were constrained to designing with rectangular prismatic Lithium-Ion cell packs; and those large cumbersome bricks put a real damper on the big "Gee-Whiz" effect of the flexible displays (think arm-bands, or wrist-worn items for example).
As mentioned, there are several technologies which allow for flexible displays, but never before have designers had the capability for the entire product architecture to fully exploit this new characteristic. So, if displays can bend, and the motherboards are fabricated on flex circuits, it now gives hope that a power source could match the curve of the entire product and become thin, form-fitting and very compelling to new market applications.
JimT: What are a few of the applications for the flexible power source? Does a flexible power source always get used in a flexible display? Or can the application itself be non-flexible but still need the flexible power source?
Reading thru most of the blogger comments so far, I think many of us are commenting on the flexible display as opposed to the real breakthrough of the flexible power source. I was developing advance concepts for flexible displays over 10 years ago – (both electrophoretic bi-stable displays {e-ink}, and Mylar-based Liquid crystal). But a HUGE roadblock was the lack of a flexible power source. This article is reporting on something very big. When you compare the advancement curves of various technologies over the past several decades, (RF Protocols, Miniaturization, Displays, Rapid Prototyping, Batteries, etc.) the battery advancement is -- by far -- the least impressive. This development will certainly put a spike in that curve.
Ann- I know you make the reference to Toddler-Tested Electronics at DARPA as "tongue-in-cheek", but I don't think you're very far off--- After a recent focus group which interviewed military personnel on the likes/dislikes of a new prototype, it was documented that many of the intended military "users" would be young enlisted men ages 18 & 19, who, or course are fresh from the Gaming-Generation, and tend to be pretty rough on electronics.
Nadine, that's a perfect app for flexible electronics in general, including displays. Kids manhandle everything anyway, so why not make electronics more damage-proof? A new definition of ruggedized: is it toddler-proof? Wonder if DARPA is testing stuff on toddlers yet.
Yes, Chuck, just a few apps since then :) For flexible displays, the apps I see mentioned most often are watches and other wearable computers, medical devices, and signage. I think Nancy's right: once the tech is available, they will be all over the place and we'll wonder how we ever did without them.
I can remember reading about two potential plastic battery technologies more than a decade ago. I'm not talking about using plastic as an armature. There were two developments; one was more like a cap for charge storage; the other was like an organic plastic. I can also remember about film batteries which was more like plastic armature with the media deposited on the plastic film.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
