Some of the latest nautical robots take a variety of forms. They can look like small boats, tiny four-wheeled vehicles, or realistic fish. We include several professional remotely operated vehicles (ROVs), which are getting smaller and more talented. One ship-inspection version was designed by engineering students who invented a novel detachment mechanism that gives the robot the ability to stay attached to structures while passing over concave edges. Others are aimed at collecting ocean data or performing search-and-rescue operations in water.
Nautical robots that look like or emulate fish and turtles so they can interact with living creatures are becoming increasingly sophisticated in their movements. A design from
Sandia Labs will be able to transform itself from a swimming robot, to one that flies through the air, to one that uses wheels on land. Another is an open-source hardware project to develop swarms of tiny, shape-transforming boats that detect and help clean up ocean pollution.
Click on the image below to start the slideshow.
The Little Benthic Crawler (LBC) is SeaBotix's hull-inspection system for extreme environments. While moving freely through water, the mini-ROV (remotely operated vehicle) can perform inspections of harbors and wharfs. Operators can roll the LBC and attach it to a ship's hull via the machine's dual vertical thrusters. Once attached, the robot switches to a four-wheel drive mode for locomotion at speeds up to 100 feet per minute. Its vortex suction device lets the robot stick in place to a ship's hull in currents of up to 5 knots, as well as maintain a stable platform for sensors during hull inspections. This also lets the robot attach to non-ferrous metal surfaces. The LBC measures 21 inches x 19.7 inches x 15.7 inches with crawler skid attached and weighs 61.7 lb.
Mr. Wirtel, I think that lady may have been Jane Goodall. And I agree with you about venturing into the territory of wild creatures slowly and consistently. Since humans don't look or smell like birds or fish, it's obvious to them we're not competitors, but we might be predators. In the case of chimpanzees and gorillas, I suspect the concern is to make sure they realize we're not competitors.
You response about birds brings to mind just how dumb birds are, hence the term"Bird Brain". Then I have to wonder if fish are not even dumber, except when I have a rod and reel in my hands, then they are brilliant. I guess my point is, wild creatures will often accept interlopers into their areas, so long as it is done slowly, quietly and consistantly. I remember reading of a lady who studied apes and she would often venture into their sphere of influence, but never dressed as an ape. It seems to me she wrote that it was important for her safety that they apes knew she was not one of them.
Thanks, Mr Wirtel. I don't totally understand the idea of fish-like robots interacting with real fish, either, although I've read the explanations by researchers. But don't be too quick to assume fish would not be fooled by a robot fish. Birds have been fooled by robotic birds, assuming their movement was realistic enough.
Ann, that was a very fine article with some fascinating photos. I do not understand the need to design fishlike robots so they will interact with living creatures. People have been interacting with fish for years, from diving bells, shark cages, diving suits, scuba gear, and similar things. None of which resemble the species being studied. Surely a fish would not be fooled into a relationship by a a silicon fish shaped robot.
I agree, Greg. Although FlipperBot is a pure R&D project and aimed more at biosciences than engineering applications, it will be interesting to see how much further the locomotive concept is developed.
Thanks for that interesting input, bobjengr. There are tons of nautical ROVs, and some AUVs, made specifically for oil & gas applications, usually for use in conjunction with divers instead of to replace them. If your sister-in-law's sister's husband isn't using these already, he probably will be soon.
Ann--excellent post. My sister-in-law has a sister whose husband works as a diver in the Gulf of Mexico. His job is to inspect and repair, when necessary, "Texas Towers". In talking with him on several occasions, the risks involved are significant and very dependent upon weather conditions and water turbulence in the Gulf. They were extremely busy as a result of the BP spill. Every tower within a certain radius of the spill had to be inspected. I have sent him this link. It's very timely and very informative. It's amazing to me the marvelous uses robotic systems have found and the work they are doing. Great post.
To give engineers a better idea of the range of resins and polymers available as alternatives to other materials, this Technology Roundup presents several articles on engineering plastics that can do the job.
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team £100 to make (about $161 US).
A tiny humanoid robot has safely piloted a small plane all the way from cold start to takeoff, landing and coming to a full stop on the plane's designated runway. Yes, it happened in a pilot training simulation -- but the research team isn't far away from doing it in the real world.
Some in the US have welcomed 3D printing for boosting local economies and bringing some offshored manufacturing back onshore. Meanwhile, China is wielding its power of numbers, and its very different relationships between government, education, and industry, to kickstart a homegrown industry.
You can find out practically everything you need to know about engineering plastics as alternatives to other materials at the 2014 IAPD Plastics Expo. Admission is free for engineers, designers, specifiers, and OEMs, as well as students and faculty.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.