Engineering Materials

3D Print Plastic & Electronics in One Pass

View Comments: Oldest First|Newest First|Threaded View
Ann R. Thryft
User Rank
Faster R&D
Ann R. Thryft   6/6/2014 11:52:08 AM
Syringe extruders have been used in medical R&D for 3D printing various types of organ-like materials. But this is a new development in industrial uses. The combination of plastics and conductive viscous ink 3D printed in one pass is still in its early stages, but the open source technology means it can be developed faster via crowdsourcing.

William K.
User Rank
What about the components?
William K.   6/6/2014 9:33:16 PM
Printing conductors is a worthwhile thing, but to gain much functionality there need to be other parts as well. Resistors and transistors would allow some functionality, but it seems that they would need to be placed, rather than printed.

So it is a good start but not there yet.

Ann R. Thryft
User Rank
Re: What about the components?
Ann R. Thryft   6/9/2014 12:31:17 PM
William, both capacitive and conductive features can be 3D printed with this technology, mentioned on the company's website. We also give a link in the story for more info on the ink's characteristics. Transistors? Not quite yet.

Greg M. Jung
User Rank
Print Life of Dispensers
Greg M. Jung   7/20/2014 2:21:43 PM
As this technology continues to develop, it would be interesting to understand the expected print life of the cartridges for certain types of pastes.  From the articles, it seems that the current strategy is to allow quick replacement of the heads (similar to an inkjet printhead cartridge), so I'm assuming that these cartridges are currently planned on being low-cost and disposible.  (By the way, the peanut butter prototype was impressive). 

Partner Zone
More Blogs from Engineering Materials
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Some next-generation bio-based materials are superior in performance to their petro-based counterparts, but also face some commercial challenges. This is especially true of certain biopolymers, adhesives, coatings, and advanced materials.
Cars and other vehicles, as well as electronics and medical devices, continue to lead the use cases for the new plastics products we've been seeing, as engineers design products for tougher environments.
LeMond Composites, founded by three-time Tour de France cycling champion Greg LeMond, is the first to license a new carbon fiber production method invented by Oak Ridge National Laboratory (ORNL) that's faster, cheaper, and greener.
This month will mark the launch of the SpeedFoiler, a super-fast, ultra-lightweight foiling catamaran that can fly short distances over water faster than other foiling designs, in part because of its carbon composite materials.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service