HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

3D-Printed Eyeglasses Are Fit for a King

View Comments: Newest First|Oldest First|Threaded View
Page 1/2  >  >>
Cabe Atwell
User Rank
Blogger
Re: Great potential for derivative optics apps
Cabe Atwell   10/23/2013 6:14:50 PM
NO RATINGS
I'm curious if it's legal to drive while wearing those, still it's incredible to see how far 3D printing technology has come in such a short amount of time.

William K.
User Rank
Platinum
Re: Great potential for derivative optics apps
William K.   9/5/2013 9:36:11 PM
NO RATINGS
Jim T, my experience has been less satisfactory, in that it seems that smooth flowing and quick cure were mutually exclusive. The smooth flow urethane paints could be brushed on and after a few hours they would be very smooth, while the fast setting epoxy stuff looked like it had been applied with a stick. But that was a few years back. Also, the solvents in the urethane paint were fairly toxic, but they smelled so bad that nobody ever got enough of them to do any damage.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Great potential for derivative optics apps
JimT@Future-Product-Innovations   9/5/2013 1:17:51 PM
NO RATINGS
The 'big-thing' here is the smooth flowing of the resolution stepping.  I typically work a lot with 2-part epoxies and make bonds under a microscope; this article reminds me too, of that; where I watch the epoxy flow and quick-cure into smooth fluid lines.

Elizabeth M
User Rank
Blogger
Re: Is 1440 good? Opinons?
Elizabeth M   9/5/2013 5:05:17 AM
NO RATINGS
Yes, I agree, 78RPM, there is value in that yearly visit, although personally I have not been to an optometrist in a really long time, and I still wear contact lenses. But it's true that there is a service they provide that printing your own lenses isn't going to do for you. And it would have to be a very exact science for the printing to work well.

Ann R. Thryft
User Rank
Blogger
Re: Printed lenses
Ann R. Thryft   9/4/2013 3:29:56 PM
NO RATINGS
William, I'm equally amazed, especially having written about the lenses used for machine vision cameras (which if course this does not address, at least not yet). I hope the company decides to tell us more in the future about how they're doing it, perhaps after the second machine is developed with the University of Eastern Finland.

78RPM
User Rank
Platinum
Re: Is 1440 good? Opinons?
78RPM   9/4/2013 3:01:58 PM
NO RATINGS
Elizabeth M, I agree that printing your own contact lenses would be convenient and cheap. But for a long time I thought that going to the optometrist was just a way of getting the right strength of glasses and contacts. I have learned to appreciate their service as giving you good insights into your general health as they look at your retinas, corneas, lenses, and fluid. Now I make a point of going for a checkup every year.  Of course, it would be cool to print your own lenses after your visit.

William K.
User Rank
Platinum
Printed lenses
William K.   9/4/2013 2:47:34 PM
NO RATINGS
After what I had seen in the line of 3D manufacturing I am amazed that s suface as demanding as an optical lense can be produced. I can immagine illumination grade lenses, but for glasses that is amazing.

Ann R. Thryft
User Rank
Blogger
Re: Great potential for derivative optics apps
Ann R. Thryft   9/4/2013 12:33:28 PM
NO RATINGS
Jim, isn't this amazing? I like your comparison with the early SLAs. I agree: this looks like a next major step.




Ann R. Thryft
User Rank
Blogger
Re: Is 1440 good? Opinons?
Ann R. Thryft   9/4/2013 12:31:34 PM
NO RATINGS
Elizabeth, the idea of using this technology for the online order-on-demand type of glasses and contacts would make a lot of sense. It would be another example of what's called "mass customization" in 3D printing, often used of one-off items like custom-fitted hearing aids and dental models/appliances.

Ann R. Thryft
User Rank
Blogger
Re: Is 1440 good? Opinons?
Ann R. Thryft   9/4/2013 12:27:15 PM
NO RATINGS
78RPM, I agree. And those are very good questions. BTW, 1440 is on the high side for 3D printing, but not the highest.

Page 1/2  >  >>
Partner Zone
More Blogs from Engineering Materials
At this year's MD&M West show, lots of material suppliers are talking about new formulations for wearables and things that stick to the skin, whether it's adhesives, wound dressings, skin patches and other drug delivery devices, or medical electronics.
Researchers at Lawrence Livermore National Laboratory have published two physics-based models for the selective laser melting (SLM) metals additive manufacturing process, so engineers can understand how it works at the powder and scales, and develop better parts with less trial and error.
Materials and assembly methods on exhibit at next week's MD&M West and other co-located shows will include some materials you should see, as well as several new and improved processes. Here's a sampling of what you can expect.
More plastics are coming into hospital equipment, as well as single-use, patient-friendly medical devices and wearables.
The Food & Drug Administration has approved a 3D-printed, titanium, cranial/craniofacial patient-specific plate implant for use in the US. The implant is 3D printed using Arcam's electron beam melting (EBM) process.
Design News Webinar Series
1/28/2016 11:00 a.m. California / 2:00 p.m. New York
12/8/2015 11:00 a.m. California / 2:00 p.m. New York
2/18/2016 11:00 AM PT | 2:00 PM ET
2/24/2016 11:00 AM PT | 2:00 PM ET
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 11 - 15, Designing ARM Devices Using Segger Tools
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service