DuPont Performance Polymers showcased its wide range of plastics for medical and healthcare applications. These materials are similar to engineering resins and thermoplastics, but have been adapted for medical use. "They have similar chemistries, but we provide heightened manufacturing controls and testing," Diana Salvadori, North America healthcare manager, told us. They include Delrin POM and Hytrel, as well as the more recent Delrin SC 699. On exhibit was the Rhythm Foot, shown here, the second-generation version of the flexible yet durable prosthetic Niagara Foot made by Niagara Prosthetics. The original version was injection molded in one piece from DuPont's Hytrel 8238 thermoplastic polyester elastomer. This prosthetic device was designed for very active people, such as soldiers who've lost a foot due to landmines. The material, combined with the design, lets the device act as a spring, giving the wearer a more natural gait. (Source: DuPont Performance Polymers)
Greg, I agree, and that's why I was pleasantly surprised to find how many medical-grade plastics manufacturers are addressing the sterilization issue, including materials that can withstand multiple types of sterilization chemicals and processes.
I'm thinking that what 3drob noted about things not being all that easy to wipe down is due to the increased desire for more pleasing surroundings. As they give the hospitals a more "homey" feel, they also by necessity make it harder to maintain.
A big challenge in medical product design is to identify and specify plastics that survive the harsh chemicals used when wiping down surfaces for sterilization. I'm glad to see plastic suppliers continue to address this issue and develop plastics that are more resistant to chemicals and bacterial growth.
Really scary to hear about this personal story about catching something from the hospital. In addition to plastics, 3drob, hospitals are trying out other new techniques to try to keep things clean. At Johns Hopkins there is a robot that is spraying disinfectant into the air to try to prevent people from catching these hospital superbugs: http://www.marketwatch.com/story/renesas-electronics-unveils-low-power-microcontroller-family-with-up-to-1mb-of-on-chip-flash-2013-03-06
So you're right, there is more they can do to keep things clean so people don't fall ill from the place that is supposed to make them better.
Rob, the rise of super-bugs is due in part to over-prescription of antibiotics for people and the less widely known use of antibiotics in animals raised for food, as well as poor control of disease in hospital environments. Antimicrobial materials can at least not give organisms a place to grow and spread if present, and harm sick people in hospitals even further, but they're not the cause of the bugs or their spread in the first place.
After a trip to the Emergency room, my whole family picked up the Rotovirus (a lot of people were there with the bug at the time), so this rings personal for me. We were careful (bordering paranoid) not to touch things, which leads me to think it's more the staff than the objects. As I sat there looking around, I couldn't help but think that so much more could be done to make the areas less prone to disease transmission (from the beds, chairs, curtains, tables, etc.) Making things easy to wipe down, easy to remove and sterilize, hard to capture/hold fluids seems the obvious first steps.
I like that they are developing plastics capable of surviving sterilization (presumably including autoclaving), but it worries me when they start embedding anything anti-microbial. Hospitals are becoming the engineering / breeding grounds of super bugs, and it's the over use of antimicrobial materials that is the root cause.
I agree, Liz. We don't normally think of plastic as a means for fighting disease, but they do in fact play a role in the medical systems that help us recuperate. The MD&M Show is always a great place to see materials, and this is an impressive compilation of this year's best.
Thanks for this, Ann, it's nice to see plastic being used for some worthy products. Infections in hospitals are a real problem. It's not an exaggeration to say people are sometimes more sick when they leave than when they go in. I in fact just heard of a friend's father who passed away from an infection he picked up in a hospital after he had a successful operation. So it's no joke. I hope these products help prevent such things from occurring in the future.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is