Foellmer demonstrated what happens when you stick your arm into the path of Baxter's pick-and-place operation -- it stops right away. It also won't pinch you if you get your arm or leg stuck inside its area of operation, such as under one of its moving arms. At first I let Foellmer risk his limbs, not mine. Then I let Baxter's arms run into my arm. The robot's force-detecting motors stopped it immediately.
Being also a materials person, I immediately noticed that Baxter has mostly plastic surfaces, not hard, metallic ones. That's highly uncommon in industrial machines, although not unusual in some service robots. It's also another thing that makes this robot safer.
The second major goal was to make Baxter simple enough so human workers can train it to do easy but repetitive tasks. In other words, it can be programmed by people on the floor, not those with advanced engineering degrees wearing a special software pendant. The fact that it doesn't need complex programming also means it's simple to integrate into existing automated operations, although many smaller manufacturers don't have existing automated assembly lines anyway. Most of their assembly cells are inhabited by humans doing things by hand. But the simplicity of programming makes changing Baxter's tasks much easier than is usually the case in industrial robots. We've discussed that excruciating complexity on several Design News comment boards.
Rethink Robotics' Baxter. (Source: Design News)
Baxter does not move large parts: It's got a payload limit of five pounds per arm. It's also got a small footprint, weighs about the same as an average-sized adult man, and can be moved around fairly easily. It's clearly not meant to do everything, and doesn't do the kind of high-speed pick-and-place on display in Anaheim by major industrial robot makers like ABB. The other revolutionary thing about Baxter is its open-source Unix-based OS, ROS (robot operating system). That plus an SDK to be released later this year will help open up the robot as a platform for development.
Baxter's $22,000 price tag is much lower than the typical two-armed industrial robot, which should make it more appealing to small companies that want to start using automation. It's already been beta tested at a couple of customer sites, Foellmer said, and has just started shipping.
Glad you enjoyed my report, Nadine. Actually there's been a lot of intelligent robot design here in the US, but much of it's been aimed at military or rescue robots. Some's also been done in industrial robots, but not with the specific goal of a robot like Baxter. I'm really interested to see what developers do with the SDK.
My husband just told me he showed this article to one of the guys at work, who said the bone rasp looks like a diamond studded borer used in industrial mining. I've been avoiding thinking about what this femur borer actually does, but--Ouch!
Didn't realize that 3D printing for medical applications are over 30 percent and trending upward. It makes sense because 3D printing is a great fit for creating individualized, custom parts out of titanitum at a reasonable cost and with a rapid turn-around time.
I can see a lot of applications where the Baxter robot can be used in assembly line application. The robot can handle the arduous task of picking and placing a part for the operator to complete some fine assembly work like fitting tight tolerance components together. The operator can then safely hand the part to another robot for assemnbly or packout.
Enjoyed your firsthand account of Baxter, Ann. Sounds like "he" behaves as the company said he would, but I guess the proof of his usefulness on the factory floor will be in the pudding. Generally he sounds quite impressive, though!
Yes, the photo of the femur bone rasp is seriously daunting! Looks more like a weapon for a scifi superhero than a doctor...hopefully patients are under heavy anesthesia before something like this is used on them. The innovations in fabrication of the tool are quite impressive, though.
Hi Ann--Baxter has gotten a lot of attention since it was rolled out. I wonder about the ultimate safety in a real environment. To do its job it has to learn some places or zones where it expects "parts" and everywhere else would be an exception so the sensors can stop it. If your body is where a part should be, how does it know the difference?
I can imagine a learning process where the entire profile of motion, including all 3D forces and accelerations are recorded and stored, and some threshold set to that if during the entire operation a threshold is exceeded it stops. I don't know if that is more or less what they are doing. Even if that is true, a human has to set the thresholds in the learned profile, and production engineers being human, will tend to set the thresholds to eliminate any false alarms. That opens the door to injury.
Do you have any deeper insight into how Baxter will always know the difference between work and a human?
Greg, I knew medical and dental was a major app area but not that it had reached such a high percentage. I agree, it makes total sense. The reduction in cost per item of a titanium device is what amazed me the most.
BMW has already incorporated more than 10,000 3D-printed parts in the Rolls-Royce Phantom and intends to expand the use of 3D printing in its cars even more in the future. Meanwhile, Daimler has started using additive manufacturing for producing spare parts in Mercedes-Benz Trucks.
SABIC's lightweighting polycarbonate glazing materials have appeared for the first time in a production car: the rear quarter window of Toyota's special edition 86 GRMN sports car, where they're saving 50% of its weight compared to conventional glass.
Design engineers play a big role in selecting both suppliers and materials for their designs. Our most recent Design News Materials Survey says they continue to be highly involved, in some ways even more than the last time we asked to peek inside their cubicles.
Daihatsu is one of the first carmakers to customize car exteriors using 3D printing's mass customization capabilities. Effect Skins -- small exterior bumper and fender panels in different colors and textures -- can be ordered for its Copen convertible.
Several new products in this group of new adhesives, coatings, and sealants are formulated to protect sensitive electronic components, or to seal components of commercial and military aircraft. Others are designed to operate in tough, messy, dirty oil & gas operations, or for rotary applications and motors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.