As of December, McDonald's delivery trucks in the United Arab Emirates (UAE) have logged over 1 million kilometers (800,000 miles) on 100-percent, unblended biodiesel made from recycled cooking oil used in the chain's restaurants. The program, begun 17 months earlier, isn't the only one the company oversees: similar programs are in place in the US, Europe, and Australia.
When I write about biofuels, I usually look at plant feedstocks that can be grown and efficiently converted into high-performance biodiesel and other kinds of transportation fuels. I don't cover the small, local, recycled cooking oil initiatives I've seen in my own town, and in other areas. Why? Because they haven't seemed serious or large-scale enough to make a difference or help advance the technology. For instance, many of them required converted engines.
But McDonald's has changed my mind. They are anyone's definition of big. And they've been at this for a few years.
The company's sustainability program now includes almost 75 percent of eligible US restaurants, and the number is expanding. Used cooking oil is taken to a distribution facility and sold to various companies for reuse, including those that make biodiesel. McDonald's USA says the average participating US restaurant recycles almost 1,450 gallons of used cooking oil every year.
In Europe, more than 80 percent of the used cooking oil is converted into biodiesel, and McDonald's trucks there get about 37 percent of their fuel from this source. In the UK, 100 percent of restaurant cooking oil goes into biofuel for delivery trucks in that region.
In the UAE, 100 percent of McDonald's restaurants send all their used cooking oil to biodiesel maker Neutral Fuels, which converts it to 100 percent biodiesel, unblended with petroleum-based fuels, for McDonald's UAE's entire fleet of delivery trucks. Neutral Fuels operates an entirely closed-loop system. The company was the first commercial producer of 100 percent biodiesel in the Middle East.
On its website, Neutral Fuels points out that the risks of depending on agricultural biofuel feedstock are much higher than depending on recycled cooking oil as a consistent source of supply, since feedstock can account for up to 95 percent of biodiesel production costs. "Used cooking oil, ordinarily a waste product, substantially reduces this cost and improves the financial viability of biodiesel production. Securing a predictable volume and quality of used cooking oil gives us a level of consistency that allows us to build an appropriately sized biorefinery to optimize profitability for all parties and stabilize pricing."
Neutral Fuels says it collects more than 25,000 liters (6,604.3 gallons) of used cooking oil every month by the same trucks that use the biodiesel, and that deliver fresh cooking oil and other supplies to the restaurants. The company claims that biodiesel is better at lubricating engines than petroleum-based diesel, helping to slow down wear and prevent failure, and also acts as a cleansing agent in fuel systems to improve efficiency.
The company's conversion process includes a patented glycerine separation method that it says eliminates the variability caused by traditional, complex processes such as centrifuging. It also uses a flash drum technology for more reliable recovery of methanol that produces a higher quality fuel than traditional methods, and waterless purification, which produces more consistent fuel.
Gorski, the UAE definitely knows. In McDonald Arabia's press release (link given in my article), it says that the project was funded in part by Dubai FDI, the foreign investment promotion arm of the Department of Economic Development.
The story states that these 800,000 miles have been loged in the UAE. Does teh UAE know about this? I can't see how they would allow a substitute for petroleum-based fuels to be used in their countries.
We're moving from trivia to nitpicking over the number of digits used in conversion. The conversion factor I used was 1.6093 Km/mile. You conversion factor calculates out to 1.609344498. We're talking about a difference of 0.0027% There is no way the vehicles odometers would be that accurate.
In any case, the original error of your article according to your calculation was a significant 28.747% and according to mine was 28.744%. In either case a significant error magnified by the headline.
As the original figure was "over 1 million kilometers" lets just say "over 600,000 miles" rather than (800,000 miles) would have done the trick.
Thanks, bobjengr. I don't see anything wrong with McDonald's saving money from a green venture that also reduces carbon emissions. I think it's naive to expect that they wouldn't want to do it for that reason. Many companies have said they're happy to convert to biofuel, or be sustainable in other ways, as long as it's also economically feasible. Such as DuPont saying it's happy to shift all its performance plastics products to bioplastics--assuming that it makes both technical and economic/financial sense to do so http://www.designnews.com/document.asp?doc_id=239662 That, after all, is the real world.
Very informative Ann. I certainly applaud McDonalds for this effort and I, like everyone else, hopes this was seen as a corporate responsibility and not solely as a money-making venture. The very fact they were looking is laudable. Let's hope other companies follow suit and do what they can relative to conservation.
cookiejar, my bad--but your conversion is also wrong. My bad was taking the conversion given in source material instead of checking it with an online conversion engine as I usually do. Those give me 621,371 miles, not the 621,388 you cited.
Ha, Jenn, I can completely relate to McDonald's as a "guilty pleasure." There is actually one in the area here in Portugal (they are everywhere, of course!) and I have gone maybe three times in the three years I have lived here. Once a friend and I went and promised we would never speak of what we did again. ;) But if they are trying to be greener in their practices, it makes me feel a little bit better about an occasional indulgence. At least all that horrible oil is going to a good cause!
I agree, Liz. McDonald's, or fast food in general, may not be the best choice, but it's nice to see the company trying to do the right thing.
That being said, I will admit that I allow my daughter to indulge in a happy meal every once in a while. Besides the hamburger, the fries are substituted with apple slices and they offer milk in place of the standard soda. So, how bad can it be?
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
The latest model of Liquid Robotics' Wave Glider autonomous, unmanned marine vehicle (UMV), the SV3, is reportedly the world's first hybrid wave- and solar-power-propelled unmanned ocean robot.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
