Using agricultural waste, instead of food crops, to make biofuels and bioplastics is a subject that's been discussed often in Design News' comment boards. One of the biggest -- and also one of the first -- commercial-scale cellulosic biorefineries in the world is targeted for completion next year by DuPont, and it will make cellulosic ethanol from corn stalks and leaves.
The corn stalks and leaves that will serve as feedstock are known as corn stover.
DuPont has recruited more than 500 local farmers near the site of its Nevada, Iowa facility, where it recently broke ground, to provide this material. The facility, which the company expects to complete in 2014, will generate 30 million gallons per year.
Next year DuPont plans to complete one of the first and biggest commercial-scale cellulosic biorefineries in the world, which will make biofuel from corn stalks and leaves at this Nevada, Iowa construction site. (Source: DuPont)
DuPont, which is involved in agricultural science as well as plastics, has been testing and optimizing its biofuel production process and technology in a Tennessee pilot plant, but the effort began more than 10 years ago. "Nearly a decade ago, DuPont set out to develop innovative technology that would result in low capital and low-cost cellulosic ethanol production," said James C. Collins, president of DuPont Industrial Biosciences, in a press release. "By leveraging DuPont Pioneer corn production expertise and designing an integrated technology platform, we've built an affordable and sustainable entry point into this new industry."
In planning the process and the facility, DuPont has worked closely with the state of Iowa, Iowa State University, and growers to make renewable fuels a commercial reality, Collins said. As a state, Iowa leads the US in renewable fuel production, said its governor, Terry Branstad, at the groundbreaking ceremony.
DuPont estimates it will need 375,000 dry tons per year of corn stover to meet the annual goal of 30 million gallons. That will require corn stalks and leaves to be harvested from about 190,000 acres. To supply those quantities, DuPont will contract with more than 500 local farmers to gather, store, and deliver the corn residue. Although growers often leave a little stover on the field as a mulch to protect against erosion, there's a lot more than they need and disposing of it is a big headache. It interferes with corn planting and maintenance, pulls nitrogen out of the soil that could be used by crops, and can house insects and diseases that damage corn plants.
In addition to corn waste, DuPont is working on adapting its process to other feedstocks, such as switchgrass. Currently, the company is processing switchgrass in its testing facility near Knoxville, Tenn., which it owns jointly with the University of Tennessee. DuPont says several local businesses and academic institutions are interested in using the resulting biofuel to reduce some of the energy they get from burning coal.
We've written before about the need for finding usable biofuel feedstocks that don't use food crops and also don't grow non-food crops on land that could be growing food, even if it isn't used for that now. We've also reported on converting non-recycled plastic trash and other waste that would otherwise go into landfills into fuel. But I haven't seen a company and a research project on this scale that set out to do a high-quality job of making fuel from the huge amounts of agricultural waste. DuPont is a company with a lot of resources and a stated dedication to sustainability. They've spent a lot of time, effort, and research dollars on this project, and have done the homework needed to make it succeed. The proof will be in the product, but meanwhile, I say kudos and more power to them.
I am sure your cost argument is valid but I wonder how much of that argument comes from a culture that is entrenched in how things have always been done and doesn't want to branch out and make the effort to do something new with the waste. I suppose it will take efforts like DuPont's (which I applaud, by the way) to see how this can be both environmentally and financially sound for all parties involved. Maybe you're right and it's policy that will change things and support this so it benefits the farmers as well.
Ann, don't get me wrong, but I still have to wonder about the economics of this. After one of your previous articles I was down on a farm here in Illinois. I asked the fatmer about it. He had significant corn stubble left in his fields. He was aware of the opportunity, but pointed out that he would have to bundle the stalks for them to be used. The indication was that it was not worth the cost. Costs include fuel, equipment wear and farmer time (and wear).
Getting the most from a raw material is very attractive from a social and environmental point of view. The problem comes in the economics. There was a recent article I saw about ethanol producers trying to get more out of the corn by developing secondary products. One was a protien that could be used to make plastics. So, even using the "leftovers" from a process, it turns out that it is cheaper to petroleum based products for the same purpose. These are the kind of engineering trade studies I have seen in a myriad of businesses.
It may take tax and environmental policies to tip the scales.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
