The American Chemistry Council and 57 other plastics associations around the world recently reported on the progress they've made on the Global Declaration of the Plastics Associations for Solutions on Marine Litter. The Declaration was originally announced in March 2011 at the 5th International Marine Debris Conference.
The progress report lists more than 140 education, research, policy, best-practices, recycling/recovery, and pellet containment projects to prevent marine litter, and their current status. The projects include efforts in education, global research, eco-efficient waste management, and litter prevention. By far the majority consists of education, so many of these are still ongoing. Several policy and research projects have been completed, such as an Australian study on the environmental impact of various degradable plastics, and a Canadian study on agricultural plastics recovery.
Although it might not be immediately obvious what agricultural plastics research has to do with plastic pollution in the oceans, as much as 80 percent of marine litter comes from land-based sources. About 70 percent of overall litter ends up on the ocean floor, and about 30 percent remains in suspension or floats.
The report also provides details on the Global Declaration itself, and the six commitments made under it by the plastics associations. The six commitments are areas of engagement that target sustainable solutions. They are focused on public-private partnerships to prevent marine litter, research, public policy, sharing best-practices, plastics recycling/recovery, and plastic pellet containment. After coming up with this list, declaration signatories identified specific actions to fulfill the declaration, and agreed to track and report their progress on those actions.
According to the report, the declaration was "a public commitment by a global industry to work with partners to tackle a global problem: plastics in the marine environment." It provides case studies of specific projects, and ideas about using the results of those projects to prevent marine litter in other regions of the world. The report can be accessed from a link in the press release on this page.
We've reported on The Clean Oceans Project (TCOP), which has as its primary goal the cleaning up of plastic from the Pacific Gyre, also known as the Great Pacific Garbage Patch. The non-profit organization aims to locate, remove, and recycle plastic marine debris, in part by helping to develop new technologies. For example, TCOP is working with Japan-based plastic-to-fuel system maker Blest and E-N-ergy, a Blest distributor, to develop a shipboard plastic-to-fuel conversion system that can transform plastic trash into diesel fuel. By fueling TCOP's collection vessels, the system could eliminate the need for those vessels to return to shore for disposing of the waste, and also keep that trash out of landfills.
According to the progress report, many plastics manufacturers and processors have been working to reduce plastic marine litter for a few decades. It's heartening to know that the producers of plastics, as well as some of their consumers, are trying to help mitigate the damage these materials have caused in the world's oceans.
jonnk, I agree that the proof is in the pudding. But there's more than just a recipe here. As the article mentions, and the report details, several cleanup projects have already occurred and many others are in progress or planned.
I think the first time I really got the magnitude of the problem wasn't after finding out about the gyres. That was bad enough, but much of what's there isn't visible since it's collecting sub-surface. But what got me was seeing a scene in a movie that showed vast amounts of plastic waste collecting around the mouth of a river in India, before eventually getting washed out to sea. This, of course, is one of the sources of ocean waste mentioned in the report: runoff through streams. I instantly thought of how many such streams there are in the now mostly industrialized world and realized the amount of plastic collecting in all of them was staggering.
You're right Ann, I think there are about five known was...was just speaking to my anti-plastic advocate friend yesterday and she informed me about this. Really awful to think about, and anything that can be done to clean up this mess is not just welcome, it is sorely needed and long overdue!
Elizabeth, thanks for the positive support. I agree, the industry itself is best positioned to deal with many of the problems caused by its products. It hasn't always done so, especially with cancer-causing chemistries, but when it comes to recycling efforts and ocean cleanup, I think it's doing pretty well.
Thanks, Nadine: horrific is a good word for describing the Patch. BTW, that this is not the only one, since there are four other known gyres in the world's oceans, and it's not easy to detect a plastic patch using visual means alone. At least one more has been found, that one in the North Atlantic:
Thanks for the clarification. No, this plastic pollution is by no means limited to the Great Pacific Garbage Patch , which is located within the North Pacific Gyre, or to shipping lanes. Plastic is everywhere in the world's oceans and beaches. My local Santa Cruz beaches would look unbelievable--and scare away tourists--if it weren't for periodic volunteer cleanups. Here's a photo of marine debris on the Hawaiian coast:
Yes, Ann, it's definitely good to see the plastics industry taking initiative here. Plastic has its positive aspects as well, and I guess when it was invented it was hard to foresee the problem it would cause. If anyone can put a dent in this problem, it's the people in the inudstry themselves. I definitely look forward to hearing more about specific actions that are taken in the future. Great reporting.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
The latest model of Liquid Robotics' Wave Glider autonomous, unmanned marine vehicle (UMV), the SV3, is reportedly the world's first hybrid wave- and solar-power-propelled unmanned ocean robot.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
