Three-dimensional printing is being used to make metal parts for aircraft and space vehicles, as well as industrial uses. Now NASA is building engine parts with this technique for its next-generation heavy-lift rocket.
The agency says that its Space Launch System (SLS) will deliver new abilities for science and human exploration outside Earth's orbit by carrying the Orion Multi-Purpose Crew vehicle, plus cargo, equipment, and instruments for science experiments. It will also supply backup transportation to the International Space Station, and it will even go to Mars.
NASA is using 3D printing to build engine parts for its next-generation Space Launch System. Shown here is the first test piece produced on the M2 Cusing Machine at the Marshall Space Flight Center. (Source: NASA Marshall Space Flight Center/Andy Hardin)
NASA's Marshall Space Flight Center is using a selective laser melting (SLM) process to produce intricate metal parts for the SLS rocket engines with powdered metals and the M2 Cusing machine, built by Concept Laser of Germany. NASA expects to save millions in manufacturing costs and reduce manufacturing time. SLM, a version of selective laser sintering, is known for its ability to create metal parts with complex geometries and precise mechanical properties.
The SLS will weigh 5.5 million pounds, stand 321 feet tall, and provide 8.4 million pounds of thrust at liftoff. Its propulsion system will include liquid hydrogen and liquid oxygen. Its mission will launch Orion without a crew in 2017; the second will launch Orion with up to four astronauts in 2021. NASA's goal is to use SLM to manufacture parts that will be used on the first mission.
The rocket's development and operations costs will be reduced using tooling and manufacturing technology from programs such as the space shuttle. For example, the J-2X engine, an advanced version of J-2 Saturn engines, will be used as the SLS upper stage engine. Some SLM-produced engine parts will be structurally tested this year and used in J-2X hot-fire tests.
In a NASA video, Andy Hardin, engine integration hardware lead for the Marshall Space Flight Center SLS engines office, discusses the initial testing and building stages:
We do a lot of engineering builds first to make sure we have the process [worked] out. There's always weld problems that you have to deal with, and there's going to be problems with this that we will have to work out, too. But this has the potential to eliminate a lot of those problems, and it will have the potential to reduce the cost by as much as half in some cases on a lot of parts.
Since final parts won't be welded, they are structurally stronger and more reliable, which also makes for a safer vehicle.
Ken Cooper, advanced manufacturing team lead at the Marshall Space Flight Center, says in the video that the technique is especially useful for making very complex shapes that can't be built in other ways, or for simplifying the building of complex shapes. But geometry is not the deciding factor; whether the machine can do it or not is decided by the size of the part.
3D paper printers. 3D plastic printers. 3D metal printers. All create parts that are monolithic (granted, some 3D plastic printers can print two different types of plastic, or different durometers, but it's still plastic).
These are each steps into the future, where one machine will print multiple materials to make a complete item. A valve built complete with internal seals comes to mind.
Innovative idea for using the 3D printing process to make rocket components. Certainly part integrity needs to be tested, but in many cases, this process can make more complex parts for less cost with a faster delivery time. I expect this application of technology to grow in the future.
Even the best 3D printed part I have seen is not perfect. I would be hesitant to use anything "printed" in the propulsion sections of rocket tech where human life is involved. At least for now. It is a great first step on NASA's part. Perhaps their work will innovate the printing sector like their work has in many others.
I considered printing parts for a side company I did some work for, the quality I received was unsellable. This was after outsourcing to a company who had the latest. Perhaps in the future..
Ann, this is a great new process. If it works, it will be a great way to produce these complex parts. I wonder, though, whether they can eliminate all the welds. That would be great.
It is also good to see that there will be reuse of some of the existing rocket engine designs. After the Apollo program the Saturn 5 tooling was mostly lost. When the Shuttle was having problems NASA was in no position to use technology that had already been developed to fill the gap.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
