There's more than one way to become energy independent and go off the grid. In the first week of November, residents of a three-island Pacific nation were slated to switch over to a system that produces electricity from solar power and biofuel derived from coconuts.
Tokelau, a place north of Samoa administered as a region of New Zealand, is expected to generate more than 100 percent of its electricity needs from sustainable sources. Its 1,411 citizens reside in the Atafu, Nukunonu, and Fakaofo atolls, which cover more than 10 square kilometers combined. The government of Tokelau decided in 2004 to increase energy efficiency and independence by focusing on renewable sources, in part to defray the high costs of importing diesel for generators.
Residents of Tokelau will get all their electricity from solar power and coconut-derived biofuel. Shown here is the solar energy installation on the atoll of Nukunonu. (Source: PowerSmart)
The Tokelau Renewable Energy Project, funded by New Zealand Aid, consists of three separate electrical systems (one for each island), each with its own battery storage. Each island's system is one of the world's largest off-grid solar systems, according to a blog post by PowerSmart, the New Zealand company serving as the project's lead contractor. In the past few months, the project has installed 4,032 photovoltaic panels and 1,344 batteries on the three atolls. Locally produced coconut-based biofuel will power generators that will handle overflow demand and recharge battery banks. The systems were designed to withstand high temperatures, salt-laden air, and the risks of flooding and cyclones.
Biofuels have been in the news a lot recently. In nearby Vanuatu, purified coconut oil is being used to fuel automobiles and minubuses. A Canadian jet recently became the first civilian plane to fly on 100 percent nonfood biofuel. Transesterification can convert coconut oil into a biodiesel compatible with diesel engines, though this is an expensive process and requires materials not readily available in the Pacific. During World War II, coconut oil was used in the Philippines as a substitute for diesel.
Though the European Commission has called for even stricter limits on the use of food crops for producing transportation biofuels, a feasibility report for Tokelau's solar/biofuel system called coconuts an underused local resource. The report concluded that this use of coconuts (which are abundant on the islands) would not hurt the environment, since the biodiesel would cover only 10 percent of the system's total energy needs.
The renewable energy system's original specification called for the solar panels to supply 90 percent of the islands' electricity. But a combination of sheer volume and engineering innovation means the system will provide 150 percent of the islands' current electricity needs, according to PowerSmart. The headroom will allow the islanders to expand their use of electricity without using expensive diesel fuel.
Each island had been using about 200 gallons of diesel a day to generate electricity. This was not only expensive but also challenging, because of the environmental risks involved in unloading diesel drums on tropical islands.
"The Pacific has a massive problem in importing its fossil fuel requirements, largely for power generation and transportation," Anirudh Singh, associate professor of physics at the University of the South Pacific in Fiji, said in an Inter Press Service article on the new system. "This is due to its isolated and scattered small populations. And replacing these fuels is the top priority as the import bills are exorbitant."
The combined solar/biofuel system will go a long way toward fulfilling that goal, as well as decreasing environmental impacts.
bobjengr, I didn 't see the name of the design firm in the source material. However, you might check the links we gave in the article to the website of PowerSmart, and to the feasibility report. It may be identified in one of those sources. (And I agree about those letters to Congress.)
I think this is admirable. The three islands should be commended. They saw a problem. They made their plans for solution. They actually did something about the problem and the results are tangible. Now, for better or worse, they will have to live with the solution but having a system in which 150% of their electrical needs are met seems to be proof their solution was workable. (Ann-would you mind sending your post to Congress--and maybe the Executive branch. They might see examples of government working together to do SOMETHING POSITIVE.)
Also Ann, do you know the name of the firm that designed the system? Possibility the University Fiji???? Great post.
This is a terrific development. Hats off to a small island nation for being willing to take on this grand experiment. It would be nice to keep tabs on this operation over the next few years. Especially to see how it holds up to salt exposure and tropical storms.
Thanks for clarifying your question. I'm not sure the sun stops shining much in those islands. When it does, backup is provided by the generators, run on coconut oil. They also handle battery recharging.
John, Yes, we know that wind farms are not great to look at -- and that they kill birds and bats. Here's an idea for the industry. Imagine placing many fan blades on a chain that runs on a vertical oval or circular track. The track could have a wire grid around it to prevent bird strikes. If oval, it could lie at a low profile near the ground.
My comments about passive solar should also be accompanied by one about active solar, AKA solar cells and panels as currently designed and built. And that's the fact that there's more than one way to build a solar cell. Some are flexible, such as this one:http://www.designnews.com/author.asp?section_id=1392&doc_id=248975 as well as another that we'll be publishing a post on soon. So the application of such cells to windows and/or building surfaces of various kinds could take care of the urban density problem.
Get a Grip S Baker. You sound like a DC bureaucrat. Someone on the planet has ACTUALLY DONE SOMETHING instead of held endless congressional and senate hearings, seminars, luncheons, studies and conferences about it. Look it up on Wiki. The place looks like paradise. I think I've finally found somewhere to move to.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
