HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

Composite Conducts Heat to Remove Salt From Seawater

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
Page 1/3  >  >>
Beth Stackpole
User Rank
Blogger
In search of fresh water
Beth Stackpole   10/25/2012 7:22:48 AM
NO RATINGS
Very interesting development, Ann. Providing a more economical way to attack the desalination process could really make a big difference in pushing more of these projects to the fore and help them gain a foothold in developing areas that are really desparate for fresh water sources.

bob from maine
User Rank
Platinum
Re: In search of fresh water
bob from maine   10/25/2012 11:13:23 AM
NO RATINGS
When reading of flash-tube boilers I envisioned tubes heated to several hundred or more degrees, not 70-130. The concept of having water spray and evaporated steam in close proximity without excessive mixing is interesting. I wonder if flash-tube could be economically superior to Reverse Osmosis? Certainly the next 30 or so years will see the need for many more water purification methods.

Ann R. Thryft
User Rank
Blogger
Re: In search of fresh water
Ann R. Thryft   10/25/2012 12:48:26 PM
NO RATINGS
I've been watching the desal controversy for several years as it's been debated locally. Although it's not the only one, infrastructure cost is definitely one of the problems that must be overcome.

Ann R. Thryft
User Rank
Blogger
Re: In search of fresh water
Ann R. Thryft   10/25/2012 12:55:53 PM
NO RATINGS
Reverse osmosis and other membrane technologies are the methods I'm more familiar with and have heard mentioned more often, so I was surprised to discover that thermal distillation is the technology used in the majority of installations. Although RO presumably uses somewhat less energy, both processes are quite intensive energy users. Re temperatures, thermal distillation is a form of vacuum distillation, which allows water to boil at a lower than normal temperature due to lower pressure. The Wikipedia article on desal is helpful.

Tim
User Rank
Platinum
Plastic Material
Tim   10/25/2012 7:17:44 PM
NO RATINGS
It would be interesting to know the base resin used to add the copper fibers.  The 50% letdown of copper is pretty significant.  Good article.

NadineJ
User Rank
Platinum
Re: In search of fresh water
NadineJ   10/26/2012 12:55:22 PM
NO RATINGS
Desalinization isn't a good long term solution.  It's been used in Israel for years for crop irrigation.  The strawberries in Israel today aren't nearly as delicious or nutritious as they were decades ago.  I think the berries are telling us something.  Legalizing and building infrastructure to utilize grey water would offer a longer solution for potable water shortages.

This may be easily used for manufacturing and energy creation.  Many newer processes seem to involve massive amounts of fresh water.

Nicely written.  Very informative.

William K.
User Rank
Platinum
Desalination
William K.   10/28/2012 7:43:08 PM
It would seem that removing the salt and other minerals froom seawater would be the preferred method, not only because of the magnesium recovered, but because sea water is an easy to get resource that we won't be in any danger of running out of. If the berries are different after a few years it is probably because of cost being taken out of the growing process, not because of the water. What quality reduction has been implemented to increase profits?

Of course desalination does need a lot of energy, I don't know any way around that, one other option is for people to not live in that area that has no water. Did anybody ever stop and consider that some places that seem uninhabitable ARE UNINHABITABLE? Even if some developer puts houses there?

REmember the Bob Dylan quote: "One should never be where one does not belong"? It is also appropriate for areas without water. 

The problem is that while we can make potable water out of seawater, we can't make the energy to do the process.

Mydesign
User Rank
Platinum
Sea water purification
Mydesign   10/29/2012 1:23:42 AM
NO RATINGS
1 saves
Ann, I know in most of the Arab countries, they are distilling the sea water for residential purpose other than drinking. Am not sure about the technology they are using for this purification, but I heard that it's a multi stage purification, where water is evaporating to remove the salt content. In such cases I think the new technology seems to be superior and affordable.

Mydesign
User Rank
Platinum
Re: In search of fresh water
Mydesign   10/29/2012 2:00:47 AM
NO RATINGS
1 saves
Beth, we know that eventhough 2/3rd of earth is covered by water, most part of the world still have scarcity of drinking/fresh water. So the best option to bridge the gap is purification or desalination of sea water. Most of such projects required huge investment and complex technology/machinery for purifying the salt water. A new more economical and simple technology has yet to be discovered and I think these new technology may comes under that category.

Jack Rupert, PE
User Rank
Platinum
Pipe Cleaning
Jack Rupert, PE   10/29/2012 10:46:11 AM
NO RATINGS
Very interesting article, Ann.  Living in the Midwest on the shores of one of the largest bodies of fresh water in the world, I didn't have a lot of background in how desalination is accomplished.  Using the method you described, I would assume that they materials being used would have to be rather "slippery" too.  If you are spraying salt water on them specifically to cause steam and leave the salt and contaiminate behind, I would think that the pipes would be covered in a relatively short period of time...either that or there is a good method for continual cleaning.

Page 1/3  >  >>
Partner Zone
More Blogs from Engineering Materials
Artificially created metamaterials are already appearing in niche applications like electronics, communications, and defense, says a new report from Lux Research. How quickly they become mainstream depends on cost-effective manufacturing methods, which will include additive manufacturing.
SpaceX has 3D printed and successfully hot-fired a SuperDraco engine chamber made of Inconel, a high-performance superalloy, using direct metal laser sintering (DMLS). The company's first 3D-printed rocket engine part, a main oxidizer valve body for the Falcon 9 rocket, launched in January and is now qualified on all Falcon 9 flights.
A new thermoplastic composite for high-speed, high-volume injection molding has tensile strength that's close to, and sometimes better than, either lay-up composites or metals.
Lawrence Livermore National Laboratory and MIT have 3D-printed a new class of metamaterials that are both exceptionally light and have exceptional strength and stiffness. The new metamaterials maintain a nearly constant stiffness per unit of mass density, over three orders of magnitude.
Smart composites that let the material's structural health be monitored automatically and continuously are getting closer to reality. R&D partners in an EU-sponsored project have demonstrated what they say is the first complete, miniaturized, fiber-optic sensor system entirely embedded inside a fiber-reinforced composite.
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Aug 18 - 22, Embedded Software Development With Python & the Raspberry Pi
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service