A manufacturing research pact among Airbus, aerostructure manufacturer Aerosud, and the South African Council for Scientific and Industrial Research (CSIR), reportedly aims to develop the biggest, fastest 3D printer possible for making titanium aircraft and satellite components.
Airbus' entrance into the agreement is for testing the viability of components made with the process. The project, called Aeroswift, actually began earlier this year when Aerosud and the South African CSIR's National Laser Centre agreed to work together to slash the production costs of aerospace components using laser additive manufacturing (LAM), another name for selective laser sintering (SLS). It focuses on using titanium powders for the production of large, complex components.
Airbus, aerostructure manufacturer Aerosud, and the South African Council for Scientific and Industrial Research, are partnering to develop the biggest, fastest 3D printer possible for making titanium aircraft and satellite components. Shown here, the Airbus A380 demonstrator aircraft arrives at the 2012 Farnborough International Airport. (Source: Airbus)
According to a CSIR press release, at the announcement of this partnership in Johannesburg, Airbus's Dale King said the CSIR and Aerosud are the only organizations doing work on high-speed, large-volume additive laser manufacturing. "That is why we have decided to forge a partnership with them [the CSIR and Aerosud]," King is quoted as saying. "We came to South Africa for this project because we believe the country has the necessary skills and competencies in the field of LAM."
A prototype LAM system will be completed by mid 2013, and is expected to produce large, complex parts at a rate 10 times faster than traditional manufacturing methods, said Beeuwen Gerryts, chief director of South Africa's Department of Science and Technology, in a September 14 press release. The Department has been championing the development of a broad titanium industry in South Africa, from mining the raw mineral, to producing metal powder, all the way to forming components. South Africa is currently the second largest supplier of titanium ore, but does not export semi-finished or finished titanium products.
The consortium expects to conduct two years of testing, evaluation, and process development to determine whether the parts can be used in aircraft. "The signing of this collaboration agreement represents a major step in ensuring that we develop laser additive manufacturing (LAM) technologies with inputs from our industry partners to make sure that these technologies are relevant when they are commercialised," Dr. Ndumiso Cingo, manager of the National Laser Centre, is quoted as saying in the CSIR press release.
Titanium has been used for several years in the manufacturing of aircraft components, primarily via machining. Earlier this year, Dynamet Technology received a milestone qualification approval from Boeing for supplying Ti-6Al-4V alloy products created with powder metals for structural components on commercial aircraft. Dynamet's process produces PM titanium in basic shapes and near-net shape forms by combining cold consolidation of blended elemental titanium, and alloy powders with vacuum sintering.
Ann - thanks for offering the large size baths that are still being developed. I had no idea that 3D makers were developing apparatus that large. 6 meters square-? That's enormous. That's about 50 feet across diagonal; large enough to make a wingspan frame. Wow.
Chuck, I looked all over for build volume and printer size with no luck. The only clue is that it's designed to build components of large aircraft structures. I'm guessing several feet per side of build volume. Very large 3D printers exist in architectural apps for use with sand and soil and their build volumes can be 2m x 2m x 5m up to 6m x 6m x 2m, and even larger in the works.
@naperlou: Selective laser sintering typically doesn't yield a fully-dense part, so the mechanical properties would be significantly inferior to those of a forging. On the other hand, it has been shown that selective laser sintering followed by hot isostatic pressing can give mechanical properties equivalent to conventionally-processed titanium.
It seems like a good move for South Africa to go from an exporter of raw materials to a manufacturer of high-tech components. Other developing countries could benefit from this example.
Lou, the strength of the PM/sintered titanium powder metal parts produced by Dynamet has received approval from Boeing for use in structural aircraft parts, after a few years of testing. That news is pretty amazing on its own. The fact that Airbus has signed on to the Aeroswift aircraft structures project to help test selective laser-sintered titanium parts is another vote of confidence. It will be interesting to see what happens during that test phase.
Ann, this is interesting news. One question I would have is on the strength of the materials. In general, machined materials are stronger than injection molded materials. Of course, if the strength is enough for the purpose, then that is enough. Then the speed of manufactur is all important.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 4
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
