3D printing techniques are reaching into space to help NASA astronauts. They're also creating production metal and plastic parts for unmanned aerial vehicles (UAVs), fighter jets, commercial planes, and cars. Research is underway to develop additive manufacturing (AM) techniques for making end-use parts for cars and planes from aluminum powders and other materials, including 3D printing carbon composites. Materials and processes are now pushing the edges of what's possible in automotive and aerospace applications.
When humans get to Mars, they will drive around the surface of the Red Planet in a rover much bigger than Curiosity that incorporates AM-made parts. NASA is testing a manned Mars rover in Arizona under its Desert Research and Technology Studies (RATS) program. It's about the size of a Humvee, has a pressurized cabin for two astronauts, and 12 wheels on six axles for navigating irregular terrain.
Humans exploring Mars will probably get around in a Humvee-sized rover with a pressurized cabin like this one NASA is testing in the Arizona desert. It contains about 70 parts made with a Stratasys production-grade Fortus printer, including pod doors, camera mounts, vents, and housings.
The rover contains about 70 parts made with Stratasys's Fused Deposition Modeling (FDM) process and a production-grade Fortus printer. Parts include large pod doors, a large component that works as a front bumper, camera mounts, flame-retardant vents and housings, and lots of custom fixtures. Materials include acrylonitrile butadiene styrene (ABS), polycarbonate/acrylonitrile butadiene styrene (PCABS), and polycarbonates.
NASA has tested some 3D printers in zero-gravity to determine the feasibility of using them on the International Space Station. During several zero-gravity flights made by NASA's Flight Opportunities Program, Made in Space tested a 3D Systems Bits from Bytes 3000 printer, another off-the-shelf printer, and a third printer customized to manufacture structures in space. Several objects were printed in flight, including a scaled-down wrench. Made in Space worked with AutoDesk to optimize space-based design principles. Since tolerances are even tighter on the space station, a different 3D Systems model is now under test, Cathy Lewis, vice president of global marketing, told us.
Closer to Earth, Microturbo, a manufacturer of gas turbine jet engines, is working with the Advanced Manufacturing Collaborative Research Centre in Australia to develop selective laser melting (SLM) methods, another term for selective laser sintering (SLS), for producing aerospace microengine components using metal alloys. The project aims to develop demonstration microengine components free of cracks and porosity. The partners expect to reduce production stages and material waste, as well as cut design cycles for developing parts. They also plan to develop non-destructive testing methods.
EADS Innovation Works has manufactured several metal production parts for Airbus planes using SLS, including wing brackets, hinges for engine covers, air intake baffles, and aerodynamically profiled cooling ducts. The constraints the company has encountered include lack of fine-tuned temperature controls and restrictions on maximum part sizes.
EADS also worked with EOS to explore a redesign that could take advantage of EOS's direct metal laser-sintering process for a titanium engine cover door hinge on the A380 commercial aircraft. The goal was to make the hinge lighter while retaining its strength. The redesigned hinge, which is not currently used in service, weighed 65 percent less than one made with a conventional casting design. On the airliner, this would result in an overall weight savings of 10kg.
Nice indepth account of how 3D printing is really changing the game when it comes to creating production parts from a wide variety of materials and in a much shorter time span. Beyond the implications in the aerospace applications you mentioned, Ann, the experimentation going on to use less expensive and more portable 3D printers in army applications, in the field, as a means of helping troops with extra parts they need or more significantly medical care is really exciting.
Thanks, Beth. The DoD's desire to make 3D printing accessible and useful for soldiers is apparently one of the main forces behind the formation of NAMII, the additive manufacturing initiative/consortium we covered: http://www.designnews.com/author.asp?section_id=1392&doc_id=251513
Seems like the dual forces of interest from the DoD and the commercial business sector could do a lot to advance the cause of 3D printing and additive manufacturing well beyond where it is today. Couple that with all the activity on the consumer front and you've got the real makings of a market.
I agree--the fact that 3D printing, in all its variety, is now on the radar of so many people and organizations bodes well, as does the spread of machines, and more and more materials, across the different market segments.
I really like the new materials. that's been my fascination with 3D printing thus far. The software advancements are good, but the materials determine what you can make. Wonder what's next?
One more thought. One thing that comes to mind to me, being an ex-machinist is the precision i.e. tolerances they can hold. I am betting they get better at that. You can print something all day long with whatever material, but if you can't hold certain tolerances then it isn't good for precision work.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
