HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

BMW Engine Powered by Aluminum Piston

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
Page 1/2  >  >>
richnass
User Rank
Blogger
Is aluminum strong enough?
richnass   7/13/2012 10:49:48 AM
NO RATINGS
I'm a little surprised that they found that aluminum is strong enough for this application. And very pleased, asuming it can work well over time. Is plastic next?

Ann R. Thryft
User Rank
Blogger
Re: Is aluminum strong enough?
Ann R. Thryft   7/13/2012 11:50:37 AM
NO RATINGS
The aluminum industry has been working on high-strength versions, including alloys such as aluminum-lithium, for some time now. For example, it's the major metal in aircraft, where it's mostly replaced steel (see my upcoming July feature article on aircraft materials). We've also covered a brake rotor prototype made of an aluminum composite:
http://www.designnews.com/author.asp?section_id=1392&doc_id=239090
Aluminum rotors aren't new, but this one is managing to keep up with the increasing heat requirements of today's smaller, hotter engines, not a small feat. There are some under-hood applications of plastics, including carbon composites, such as this one I wrote about
http://www.designnews.com/author.asp?section_id=1392&doc_id=243857
but AFAIK, not yet in car engines.

Dave Palmer
User Rank
Platinum
Re: Is aluminum strong enough?
Dave Palmer   7/13/2012 12:19:58 PM
NO RATINGS
Ann, do you know what kind of aluminum Federal Mogul is using for this application? I assume it is an aluminum-silicon alloy.  Do you know if it is hypereutectic, eutectic, or hypoeutectic? (This is metallurgy-speak for more than 12% silicon, about 12% silicon, or less than 12% silicon).

The DuraBowl re-melting process is interesting, and, like many good ideas, seems obvious in retrospect.  Doing failure analysis of aluminum pistons, I've often observed that areas which melted (in service!) are much harder and have a much finer microstructure than the surrounding area.  But I'm not sure that it would have occurred to me to exploit this as a manufacturing process.

Friction stir processing is another way to achieve improved properties in the piston bowl area.  I'm not sure whether anyone is doing this commercially yet, but there is a lot of interest in it.  At last year's Materials Science and Technology conference, Dr. Saumyadeep Jana gave a presentation on friction stir processing of cast aluminum alloys; during the Q&A session, it was clear that just about everyone in the audience (including myself!) had pistons on their mind.  I strongly suspect we'll be seeing friction stir processed pistons in the next couple years.  This would be a good topic for an article.

Ann R. Thryft
User Rank
Blogger
Re: Is aluminum strong enough?
Ann R. Thryft   7/13/2012 12:45:57 PM
NO RATINGS
Dave, thanks for the feedback on the re-melting process. I agree, it doesn't sound intuitively obvious as a manufacturing process. Regarding the alloy, I'd like to know, too: no details on this product were given. On the company's website appears this general statement about their aluminum pistons. but whether it applies to the new diesel piston is not clear: "We offer aluminum diesel pistons made of Federal-Mogul's exclusive, high-strength B3 alloy (2006) for high-end light-vehicle diesel applications, giving a 10 percent higher fatigue resistance at 440º C to absorb extreme loads in performance engines."

Charles Murray
User Rank
Blogger
Re: Is aluminum strong enough?
Charles Murray   7/13/2012 6:08:21 PM
NO RATINGS
Nice story, Ann. Do you know if these pistons use cast iron cylinder liners? Going way back to the old Chevrolet Vega (does anyone remember the Vega?), engineers have tried to use aluminum. When the Vega's engine had problems, engine builders started employing the cast iron liners. In the '90s, engineers got rid of the cast iron liners and started using hypereutectic aluminum alloys for the blocks and various coatings for the inside of the cylinder, but I don't know how that came out. Are they still using the liners?

naperlou
User Rank
Blogger
Re: Is aluminum strong enough?
naperlou   7/16/2012 9:15:17 AM
NO RATINGS
Rich, ceramics are finding use in the turbine blades in aircraft engines.  If that works out, can applications in automobile engines be far behind?

bob from maine
User Rank
Platinum
Re: Is aluminum strong enough?
bob from maine   7/16/2012 9:44:33 AM
NO RATINGS
BMW Motorcycles ran an all aluminum block with no cast iron liners with great success. I've seen them run over 100,000 miles with no loss of compression. I don't think the problem is purely aluminum but the overall design of the combustion process. The normal diesel "crack" that occurs at the time of ignition created enormous stresses in all the metal in the combustion chamber, not just the piston; spreading this explosion out over time would go a long way toward reducing stress. I'd guess that BMW has adopted more than just a triple turbocharger and an aluminum piston to make this engine meet their performance goals. Using aluminum pistons and reducing reciprocating mass is a significant step toward increased performance and durability.

Ann R. Thryft
User Rank
Blogger
Re: Is aluminum strong enough?
Ann R. Thryft   7/16/2012 11:53:57 AM
NO RATINGS
Chuck, trying to get details on the piston construction proved very difficult. This company makes both aluminum and steel pistons, and their liners are made of several materials including cast iron.

Dave Palmer
User Rank
Platinum
Re: Is aluminum strong enough?
Dave Palmer   7/16/2012 1:20:20 PM
NO RATINGS
@Chuck: I can't speak for the auto industry, but in the outboard engine industry, the status quo is a block made out of a lost-foam cast or die-cast alumium alloy (typically A356), a cast iron cylinder sleeve, and a hypereutectic aluminum alloy piston.  However, Yamaha has started to use plasma-sprayed cylinder liners instead of cast iron sleeves.  I believe the technology they use was developed by Ford and Flame-Spray Industries.  Sulzer Metco has a different plasma-sprayed cylinder liner technology.  One of the advantages of the plasma-sprayed liners is that they save weight compared to a cast iron sleeve.  The properties of the coating be tailored to get additional benefits.

Charles Murray
User Rank
Blogger
Re: Is aluminum strong enough?
Charles Murray   7/16/2012 4:18:59 PM
NO RATINGS
Thanks, Dave, for stirring my memory a bit. I do recall the outboard engine industry using aluminum alloy blocks. I looked back at an old article (from the '90s) and found that Mercury Marine was using (and maybe still uses) a hypereutectic aluminum-silicon block alloy known as Mercosil. Those engines went into production in '94. The silicon in the block was supposed to enhance wear resistance. Later, they used a nickel phosphorous/boron nitride piston coating with no cylinder liner, but I don't know how that turned out, or whether they still use it.

Page 1/2  >  >>
Partner Zone
More Blogs from Engineering Materials
The company that brought you 3D-printed eyeglasses has launched both an improved clear polymer material for 3D printing optical components and a high-speed, precision, 3D-printing process for making small- and medium-sized batches in a few days.
We've found an amazing variety of robot hands & arms in medicine, space, and service robots, as well as R&D and assembly. Some are based on industrial designs modified for speed or dexterity, while others more closely emulate human movements, as well as human size and shape.
To give engineers a better idea of the range of resins and polymers available as alternatives to other materials, this Technology Roundup presents several articles on engineering plastics that can do the job.
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
A tiny humanoid robot has safely piloted a small plane all the way from cold start to takeoff, landing and coming to a full stop on the plane's designated runway. Yes, it happened in a pilot training simulation -- but the research team isn't far away from doing it in the real world.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Nov 3 - 7, Engineering Principles behind Advanced User Interface Technologies
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service