The Pegasus XL rocket's aft skirt fins are constructed from a single-piece, solid, foam core and wet-laid carbon composite construction around a central titanium shaft. Its wing panels consist of a carbon-faced foam sandwich. The rocket wing's channel section spars that carry the primary bending loads and half-ribs are also made of carbon.
ATK provided the solar array that will power the NuSTAR satellite itself, as well as powering its onboard sensors for NASA's planned multiyear experiments. The company built the NuSTAR observatory's instrument structure, which includes an integrated focal plane bench and optical bench, both made of high-strength composites.
The two halves of the the Pegasus XL payload fairing's composite shell are shown here being cleaned and inspected at Vandenberg Air Force Base before the spacecraft is encapsulated. (Source: NASA/Randy Beaudoin, Vandenberg Air Force Base)
The focal plane bench serves as a stable, multi-functional platform for NuSTAR's instruments. It also functions as the primary interface to the satellite bus structure. During launch, this bench supports the stowed mast/canister and the optical bench with its integrated X-ray optics. The focal plane assembly's instrument electronics and metrology detectors are also mounted on this bench. These perform instrument alignment, focus, and data collection, which are all mission-critical operations.
The optical bench is a precision-engineered, highly stable structure responsible for supporting the X-ray optics modules, metrology lasers, adjustment mechanism, and star tracker. Held stable within the optical bench, the X-ray optics modules will acquire images as the NuSTAR satellite maps supernova explosions and searches for black holes.
Bobjebgr, I think you're right about figuring out how composites will age in space: this is all pretty new and the NuSTAR satellite (as well as the Juno satellite) is an experiment in that direction. Composites have been used in aircraft for several decades, so there's already a lot of industry knowledge about wear due to UV and strikes. Regarding NuSTAR details, you may find answers at the link to the NASA site we gave in the article. There's also some discussion in the comments to the Juno spacecraft article: http://www.designnews.com/author.asp?section_id=1392&doc_id=244386
Good article Ann—one thing interesting to me is how composites will hold up relative to their environment. I suspect the ability to judge the aging process of the composites used for the satellite, while in space, is basically a guessing-game. I'm talking specifically about UV and radiation received by the structure as years progress. Another factor, strikes by debris and very small projectiles (meteorites) flying by. Ann, do you know if there are sensors to indicate "hits" taken by the satellite while in use? Also, are there mechanisms that will gage degradation and aging?
notarboca, if you're referring to the Airbus wing failures http://www.designnews.com/author.asp?section_id=1392&doc_id=245829 those were not caused by a composite problem, but by a problem with an apparently mis-spec'ed aluminum alloy and the misunderstanding on the part of design engineers about how to interface that alloy with composites. Also, it took 10 years for that problem to show up, and so far there have been no accidents caused by it. Personally, I'm more concerned with the airlines' lowered maintenance standards for commercial aircraft.
I will be the first to say that I am scared to death of flight composites (see Airbus failures, give me a DC-9 (shut up old man :-)), but I am also aware that these are amazing pieces of hardware. Congrats on the phenominal achievement of space-rated composites!
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is