A flexible color display was demonstrated at Plastic Logic's Technology Open Day last month in the company's Russian center. The big news is that this flexible plastic display, developed by a company known for its leading research in plastic transistors, is now available in full color.
The previous generation display is 16-bit grayscale with a resolution of 150 dpi. This version is currently used in the Plastic Logic 100, an academic e-reader the company developed that's being tested in Russian schools.
The new display, like the previous generation, has a 10.7-inch diagonal screen, and is as thin as a sheet of paper at 0.8mm, or 800 microns. It displays 4,096 colors with a resolution of 112 dpi, and weighs 40gm. Its low resolution is explained by the fact that color is achieved by adding a filter on top of the grayscale screen.
Plastic Logic's flexible color display is daylight readable and has multiple applications. (Source: Plastic Logic)
Plastic Logic's flexible displays are remarkably robust: They can be cut with scissors or stomped with a boot and still tick. (Watch videos showing these demonstrations here and here.) Their stated life is five years, including 10 million page updates, or e-reader page changes. The displays are also easy to read in sunlight.
The screen technology is all plastic, based on organic thin-film transistors (OTFTs), and the main structure of the backplane is made of PET (polyethylene terephthalate), said Peter Fischer, vice president of process engineering, in an interview. PET is a widely-used polyester material that's also present in most plastic water bottles. On top of that are the OTFTs, made of other plastics.
The backplane is then laminated to E Ink's frontplane, harnessing its electronic ink technology. Due to both the E Ink display and Plastic Logic's transistors, the display is also extremely low power, since it only draws power when the screen makes an update, said Fischer.
Flexible circuits have been around for several years. Electronic components are mounted on, or printed on, flexible plastic substrates, usually made of PEEK (polyether ether ketone), an organic thermoplastic, polyimide, or transparent conductive polyester film. They've been used in watches, cameras, cellphones, and several small and/or portable consumer devices, as well as automotive and aerospace applications.
Applications for flexible color plastic screen technology of various sizes may go beyond e-reader displays. For example, Plastic Logic is investigating industrial and commercial possibilities such as conformable signage or conformal screens in medical applications, said Fischer. The screens' daylight readability in bright and dim light would be a benefit in both of those applications, as well as in mobile electronics.
The company also makes other displays that are not flexible, and is working on several other applications for its OTFT backplane technology.
Thanks, Rob. I don 't think the flexible screen idea is actually aimed at mobile electronics--it seems to be aimed more at curved, conformable signage and various types of medical device applications.
Well said, Ann. Fact is, nobody is looking for a better mousetrap. However, there are plenty of consumers who will glom on to cooler gadgets. I find it interesting that iPhones, Android phones, and iPads have done so well during worldwide economic stress.
Good point William K. It will be interesting to see how this plays out. At first I thought, this is very cool. Later, I started to wonder about the need for a flexible screen. I'm open to ideas, but right now I can't think if anything.
Yes, that is amazing, Chuck. As this technology develops, it reminds me of the movie Minority Report, where everything is a computer screen and everything is personalized. Talking about new consumer technology, I spent three days in Santa Fe on vacation last week. My son was using his Android phone to help us get around the city. The voice on the phone was very good at directions, but most of the street names in Santa Fe use Spanish words. The voice murdered the pronunciation. My favorite was Gar-sha for Garcia. It was quite amusing.
Yes, that is amazing, Chuck. As this technology develops, it reminds me of the movie Minority Report, where everything is a computer screen and everything is personalized. Talking about new consumer technology, I spent three days in Santa Fe on vacation last week. My son was using his Android phone to help us get around the city. The voice on the phone was very good at directions, but most of the street names in Santa Fe use Spanish words. The voice murdered the pronunciation. My favorite was Gar-sha for Garcia. It was quite amusing.
Rob, that's a good point about the difference in industries. Electronics has acted like the wild west for a long time: make a better mousetrap and hope people will beat a path to your door. A lot of what passes for marketing would probably make someone in A&C or other more industrial environments laugh (or maybe cringe).
Very good points, Ann. I guess I've been covering automation and control too long. In that territory a good deal of technology is developed to solve specific customer problems. Yet even in that arena, technology often precedes need and customers have to be sold on the value of the new technology.
Jack, that's exactly what this appears to be: electronic paper. I admit I don't get how it can keep working after being cut, but I saw the same video. I do wish there was more technical detail available, but the company is holding their cards very close.
I was really amazed at the video of the person cutting the display with a pair of scissors. No apparent damage to what was being displayed. Well, they've been talking about electronic paper for quite some time, it seems that we are finally seeing something close.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Engineers at the University of California, San Diego are designing a robotic arm that takes inspiration from the loose, flexible, yet very strong structure of the armored plates on a seahorse's tail.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
The latest model of Liquid Robotics' Wave Glider autonomous, unmanned marine vehicle (UMV), the SV3, is reportedly the world's first hybrid wave- and solar-power-propelled unmanned ocean robot.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
