A team headed by Siemens researchers have developed a substitute material for ABS by making a polymer from starch, palm oil, and carbon dioxide. The new material, a mixture containing poly-hydroxybutyrate (PHB), has similar properties.
The unnamed plastic is the result of a three-year project, funded by the German Research Ministry, for research into the use of CO2 as a possible feedstock for polymers. In addition to scientists at Siemens' corporate technology global research unit, project partners included researchers from BASF, well known as a leader in sustainable plastics and chemicals, as well as Munich Technical University, and the University of Hamburg.
More than 70 percent of the new plastic is made of renewable polymers. The PHB, which is made from raw materials such as palm oil and starch, is brittle. So BASF's polypropylene carbonate (PPC) was added to soften it. PPC is transparent, biodegradable, and resistant to light, and can also be processed easily. By weight, it is 43 percent CO2, which came from power plant emissions using a separation process.
More than 70 percent of an ABS substitute is made from starch, palm oil, and carbon dioxide. The research team used it to manufacture a vacuum cleaner cover to demonstrate its usefulness in consumer products. (Source: Siemens)
Standard polystyrene-based ABS, or acrylonitrite-butadiene-styrene, is an engineering-grade plastic frequently used in consumer electronics products. In the last few years, concern about styrene's toxicity has led to a search for alternatives. Although the jury is still out on whether it has cancerous effects, styrene is regarded as a hazardous chemical, at least for eye contact, skin contact, and ingestion or inhalation. The Environmental Protection Agency has listed it as a suspected toxin and is investigating its potential as a carcinogen, as is the US National Toxicity Program of the Department of Health and Human Services.
The Siemens-led research team found that the new material is a good alternative for ABS. To demonstrate its practicality, Bosch-Siemens-Hausgeräte (BSH) made a vacuum cleaner cover out of the material. As a next step, the Siemens scientists, along with BSH and BASF, want to investigate whether they can replace other types of plastic that BSH uses with composite materials based on CO2.
Other efforts have been made to corral CO2 and make it useful, including as a renewable feedstock for polymers. Novomer has partnered with Penford to jointly develop and commercialize composites that combine starch and PPC polymer for use in packaging materials. Starch blended co-polymers are not new. Usually, they combine starches with petrochemical-derived polymers. Bioplastics based on starch have been used in packaging and other consumer goods for several years. But creating them from CO2 certainly is new.
Novomer is also commercializing a catalyst system that turns waste CO2 into polymers for applications that include packaging, sacrificial materials, and coating resins. Using the catalyst to combine CO2 with ethylene oxide creates polyethylene carbonate (PEC), while combining CO2 with propylene oxide creates PPC. The resulting low molecular weight polymers can be used for coating resins and adhesives, while high molecular weight polymers include thermoplastics and sacrificial materials for electronics.
What a cop out you two are just cranky ....trees are wood ..they make stuff out of wood ...if palm oil makes stuff you can't make with wood...why woodnt you....get real
I don't think we should have to trade off one sustainability factor against another, in this case, a styrene alternative vs using palm oil. Actually this is a three-way tradeoff, since it's a creative way to reduce and make use of CO2.
Oh no probs, it was an extremely interesting article, I'm glad you posted it. I was just highlighting issue of sustainability. Which it is clear you are aware of.
Thanks for your comments. I'm aware of the palm oil problem, which is not insignificant. I decided to report this anyway, because finding a substitute for styrene is a big deal, since it's also bad for the environment. Humans aren't the only beings that are affected by it. Since this material is still in R&D it's possible that BASF, which has a deservedly good rep in sustainability consciousness, might be looking for an alternative to palm oil.
Using palm oil as an alternative ingredient for ABS is a bad idea. Thousands of acres of tropical forests have been converted to palm oil plantations, and this would just accelerate that trend.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
The airframe of Airbus's A350 XWB consists of a bigger proportion of carbon-fiber-reinforced composite structures than any other commercial jet to date: over 53 percent by weight.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
16 
