HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

Laser-Welded Metal Foam Sandwich Lightweights Ships

NO RATINGS
Page 1 / 2 Next >
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
ChasChas
User Rank
Platinum
???
ChasChas   5/21/2012 10:30:51 AM
NO RATINGS
 

Welding dissimilar materials in a marine environment? Seems like I went school for nothing - they keep changing the rules after they teach them.

Interesting article! 

warren@fourward.com
User Rank
Platinum
Re: Laser-Welded Metal Foam Sandwich
warren@fourward.com   5/19/2012 9:38:15 PM
NO RATINGS
I also spend many years in the marine industry, and the dissimilar metal issue arose all the time.  And the center of gravity would certainly rise, but surely this is taken under consideration.

i wonder where they are on using this new material?  I am sure better minds than ours have figured out what the issues are.  Just like they did on the Titanic, er I mean the center fuel tank on the 747s, er I mean the solid-state booster on the space shuttle, er, well, you know what I mean.

Scott Orlosky
User Rank
Platinum
Re: Laser-Welded Metal Foam Sandwich
Scott Orlosky   5/19/2012 8:09:31 PM
NO RATINGS
As excited as I was by the headline, as someone who has spent a lot of time in the marine industry, once I read about a dissimilar metal construction I lost my enthusiasm.  The main place where ships need to save weight is in the superstructure (to make them less "tippy") and that problem has been solved by using all aluminum construction.  An explosion welded bar of steel/aluminum is used to provide a transition from the deck to the superstructure.  Other than that, I have to agree with Warren that the ability to repair stuff easily at sea is paramount.  Structures corrode, crack and come apart due to the constant barrage of vibration, sea spray and racking stresses. Probably best to keep this sandwich either in the air or on solid ground.

warren@fourward.com
User Rank
Platinum
Laser-Welded Metal Foam Sandwich
warren@fourward.com   5/19/2012 4:51:33 PM
NO RATINGS
I wonder about repairs underway?  When you are at sea, you are on your own when trouble occurs.  Can repairs be made without a 6kW laser?  How about standard aluminum welding processes? Can you store on board replacement sections that can be used to reinforce or replace?

And does the sandwich material come with pickles?  Just curious.

Ann R. Thryft
User Rank
Blogger
Re: Interesting process
Ann R. Thryft   5/18/2012 12:47:17 PM
NO RATINGS
Thanks for weighing in on this subject, Dave, with your background in metals. From the description, I visualized lasers trimming away the aluminum foam so it doesn't contact the edges of the panel's top steel sheets, only its internal steel sheets. I saw it somewhat like the peanut butter that slops over the side of a sandwich. Here, the "peanut butter"--perhaps a slice of cheese is a better metaphor-- is cut back so it doesn't stick out that far. Then the "bread slices" are positioned so there's no gap and welded. This may be inaccurate, but that's what I thought it meant. A video sure would be helpful.

Ann R. Thryft
User Rank
Blogger
Re: Basic process
Ann R. Thryft   5/18/2012 12:46:11 PM
NO RATINGS
Thanks, naperlou. I thought the combination of technologies to improve this process was especially interesting. Seems like we're seeing more of that: combining different assembly or manufacturing-related techniques to solve new materials and/or process problems. For instance, yesterday's robots plus lasers in composite repair story
http://www.designnews.com/author.asp?section_id=1392&doc_id=243715

Dave Palmer
User Rank
Platinum
Interesting process
Dave Palmer   5/18/2012 10:55:56 AM
NO RATINGS
Welding dissimilar materials -- especially dissimilar materials with very different thermal characteristics (sheet vs. foam) -- can be a big challenge.  The closest I've come to this is inertia welding a hollow carbon steel tube to a solid stainless steel shaft.  That's challenging enough, but it's child's play compared to the process described in this article.

It wasn't immediately clear to me how trimming the edges of the foam prevents intermetallic formation.  I know that intermetallic formation can be prevented by keeping heating times short, and maybe precise alignment between the aluminum foam and the steel sheet prior to welding helps with this.  The high heating and cooling rates made possible by laser welding might also help.

Thanks for an interesting article!

naperlou
User Rank
Blogger
Basic process
naperlou   5/18/2012 10:01:54 AM
NO RATINGS
Ann, this is an interesting twist on an old technology.  Welding has been around for a long time.  By improving the process new things are possible.  Isn't it interesting what some of these engineers will come up with?

<<  <  Page 2/2
Partner Zone
More Blogs from Engineering Materials
To give engineers a better idea of the range of resins and polymers available as alternatives to other materials, this Technology Roundup presents several articles on engineering plastics that can do the job.
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
A tiny humanoid robot has safely piloted a small plane all the way from cold start to takeoff, landing and coming to a full stop on the plane's designated runway. Yes, it happened in a pilot training simulation -- but the research team isn't far away from doing it in the real world.
Some in the US have welcomed 3D printing for boosting local economies and bringing some offshored manufacturing back onshore. Meanwhile, China is wielding its power of numbers, and its very different relationships between government, education, and industry, to kickstart a homegrown industry.
You can find out practically everything you need to know about engineering plastics as alternatives to other materials at the 2014 IAPD Plastics Expo. Admission is free for engineers, designers, specifiers, and OEMs, as well as students and faculty.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service