Glass-fiber composite foam sandwiches are already used in aircraft manufacturing to help planes shed weight, and carbon composite sandwiches using foam or honeycomb cores are also on the rise in planes and trains. Now, a laser-welded metal sandwich with a metal foam core has been demonstrated for lightweighting ships.
Along with its project partners, the German Laser Zentrum Hannover research and development center laser welded a demonstrator for marine gear unit foundations made of steel and aluminum foam sandwich material. The demonstrator was on display at the Hannover Messe 2012 show.
A new process for laser-welding steel-aluminum foam sandwich structures for lightweighting ships has been demonstrated. Shown here is a laser fillet weld support for structures such as marine gear unit foundations. (Source: Laser Zentrum Hannover)
Using metal foam sandwiches to make ships lighter isn't a new idea. The metal foams are highly porous materials, often made of aluminum, that can also more easily absorb noise because of their cellular structure. Noise reduction is a growing trend in car interiors, and both the inside and outside of planes, in those cases usually employing non-metal foam or metal or non-metal honeycomb cores.
Metal foams are not only light in weight and sound-absorbing, but also heat-resistant and provide good insulation against electromagnetic waves. In sandwich constructions, they have a much higher bending stiffness than solid sheets. Because of their lighter weight, they are also applicable for parts that undergo high amounts of stress, such as rudders or machine foundations. In those applications, large-scale metal foam sandwich constructions can reduce weight by as much as 20 percent.
The problem with this technology has been the difficulty in welding steel and aluminum. This is caused by different material thicknesses, and the inhomogeneity of the foam core. Aside from problems such as the distortion caused by the thermal effects of foaming the aluminum core in mixed sandwich materials, cracks in the welding seam can also occur, caused by intermetallic phases due to welding.
Ann, this is an interesting twist on an old technology. Welding has been around for a long time. By improving the process new things are possible. Isn't it interesting what some of these engineers will come up with?
Welding dissimilar materials -- especially dissimilar materials with very different thermal characteristics (sheet vs. foam) -- can be a big challenge. The closest I've come to this is inertia welding a hollow carbon steel tube to a solid stainless steel shaft. That's challenging enough, but it's child's play compared to the process described in this article.
It wasn't immediately clear to me how trimming the edges of the foam prevents intermetallic formation. I know that intermetallic formation can be prevented by keeping heating times short, and maybe precise alignment between the aluminum foam and the steel sheet prior to welding helps with this. The high heating and cooling rates made possible by laser welding might also help.
Thanks, naperlou. I thought the combination of technologies to improve this process was especially interesting. Seems like we're seeing more of that: combining different assembly or manufacturing-related techniques to solve new materials and/or process problems. For instance, yesterday's robots plus lasers in composite repair story http://www.designnews.com/author.asp?section_id=1392&doc_id=243715
Thanks for weighing in on this subject, Dave, with your background in metals. From the description, I visualized lasers trimming away the aluminum foam so it doesn't contact the edges of the panel's top steel sheets, only its internal steel sheets. I saw it somewhat like the peanut butter that slops over the side of a sandwich. Here, the "peanut butter"--perhaps a slice of cheese is a better metaphor-- is cut back so it doesn't stick out that far. Then the "bread slices" are positioned so there's no gap and welded. This may be inaccurate, but that's what I thought it meant. A video sure would be helpful.
I wonder about repairs underway? When you are at sea, you are on your own when trouble occurs. Can repairs be made without a 6kW laser? How about standard aluminum welding processes? Can you store on board replacement sections that can be used to reinforce or replace?
And does the sandwich material come with pickles? Just curious.
As excited as I was by the headline, as someone who has spent a lot of time in the marine industry, once I read about a dissimilar metal construction I lost my enthusiasm. The main place where ships need to save weight is in the superstructure (to make them less "tippy") and that problem has been solved by using all aluminum construction. An explosion welded bar of steel/aluminum is used to provide a transition from the deck to the superstructure. Other than that, I have to agree with Warren that the ability to repair stuff easily at sea is paramount. Structures corrode, crack and come apart due to the constant barrage of vibration, sea spray and racking stresses. Probably best to keep this sandwich either in the air or on solid ground.
I also spend many years in the marine industry, and the dissimilar metal issue arose all the time. And the center of gravity would certainly rise, but surely this is taken under consideration.
i wonder where they are on using this new material? I am sure better minds than ours have figured out what the issues are. Just like they did on the Titanic, er I mean the center fuel tank on the 747s, er I mean the solid-state booster on the space shuttle, er, well, you know what I mean.
The first word that pops into my head when I hear the words dissimiar metal is corrosion. When I pull an aluminum wheel off my car which pushes against a steel brake disc, you can see the pattern of the contact patch because the contact patch is rusted.
I am fascinated by the technology to do this and how wavelength was important to the process. ("Say gurl, see if vermillion will work. Or maybe a chartreuse, I'm partial to greens.) I had a manufacturing rep in our design group when I first went to work (his name was Edsel Buick Dodge and I'm not kidding) who said we had some welders who were good enough to make welds which looked like they had welded aluminum to steel.
If there is no oxygen in the structure is there no corrosion? Is so, then keeping the honeycomb sealed would be really important. Water never sleeps, though.
I'm with ChasChas, my materials professors must be spinning in their graves.
As the article states, the demonstrator, at least, was a marine gear unit foundation. I also thought about corrosion, but because the aluminum and steel aren't touching, there are no intermetallic phases, so there are, presumably, no corrosion issues. Thanks for the points about repair at sea. I can't speak to that, except to note that the laser welds occur only on specific welds, as stated in the article: butt welds and fillet welds. Again, a video sure would have helped.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
The 100-percent solar-powered Solar Impulse plane flies on a piloted, cross-country flight this summer over the US as a prelude to the longer, round-the-world flight by its successor aircraft planned for 2015.
GE Aviation expects to chop off about 25 percent of the total 3D printing time of metallic production components for its LEAP Turbofan engine, using in-process inspection. That's pretty amazing, considering how slow additive manufacturing (AM) build times usually are.
A $1,500, hand-operated, bench-model, plastic injection machine crowdsource-funded via Kickstarter can be used to mold small, quality, plastic parts inexpensively, on demand.
The federal government is launching competitions to kickstart three more manufacturing innovation institutes, including one focused on Lightweight and Modern Metals Manufacturing Innovation.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
