Many of the plastics on display at the recent NPE2012 show in Orlando, Fla., were sustainable in one way or another, and their manufacturers' booths were highly visible in the show's Emerging Technology pavilions. Some of them, like BASF's Ecovio, are compostable or recyclable at the end-product stage, some are made from recycled materials, like SABIC's Xenoy iQ or Stryrolution's PCR materials, and some are constructed of bio-materials, such as Altuglas' Rnew.
Click on the image below to see these and other highlights from the show.
Compared to other Plexiglas formulations, bio-based Rnew-maker Altuglas says it has greater melt flow and lower processing temperatures. Its properties, including impact resistance and chemical resistance, can be tailored, and it can be first extruded, then thermoformed with a high degree of detail, as shown here.
(Source: Altuglas International)
Tim, this material is specifically targeted for large-scale agricultural applications, as an alternative to poisonous sprays like Roundup and genetically modified (GM) crops. So is black petro-based plastic, but this material has even more benefits, since it can be plowed under, saving time and cost of removal, and saving the damage done if not removed.
Hopefully, this film is available to be applied in a large scale application. Many large scale farm plants have been genetically engineered to specifically resist herbicides (ie Round Up Ready Corn). This allows the farmers to spray the entire field to kill weeds while retaining their cash crop. If this film allows for the farmer to reduce the amount of herbicide and geneticallly engineered seed, it would only be a net gain to consumers.
Chuck, that appears to be lettuce or some other leafy vegetable. The thin film is mulch, which you put down around your crop plants to help keep down weeds and retain moisture in the soil. Many people use large sheets of black petro-based plastic, which is highly effective but does not biodegrade quickly and can leave harmful residues. I'm a gardener, not a largescale farmer, but I suspect it's put down before or during planting not after and holes punched through for the plants.
Tim, you are correct, it was the same material. In the instance I described, the bags in question were pre-formed to run on the type of machinery that packages sliced bread.
Can you imagine that material when making your kids' lunch sandwiches?
These may have been the same bags that Frito Lay introduced for their Sun Chips in 2010. They were so noisy and had a such a bad feel that the Sun Chip sales actually fell about 10% during the year that they were on the market. It would be great to see a non-noisy solution that would be bidegradable.
TJ, thanks for that input. I heard from several manufacturers of bioplastics and/or recyclable plastics (the BASF Ecoflex/Ecovio peanuts bag is both) that they had spent considerable time and effort getting feedback from users to overcome exactly the unpleasant characteristics you described. The BASF peanuts bag, for example, is not noisy like cellophane when you manipulate it and that specific problem was cited as one they had worked to overcome. So things have changed quite a bit in four years and these materials now exist--I've seen them--but they haven't yet been adopted in quantities that make them visible to end-users.
And of course, making so-called green materials from food crops, especially corn, is now a no-no.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
The latest crop of coating and sealant materials and devices has impressive credentials. Many are designed for tough environments with broad operating temperature ranges, and they often cure faster, require fewer process steps, and produce less waste.
A new program has been proposed for testing and certify 3D printing filaments for emissions safety. To engineers who've used 3D printers at home this is a no-brainer. It's from a consumer on Kickstarter, and targets use in homes and schools.
For the last 50 years, the Metal Powder Industries Federation (MPIF) has sponsored an awards competition for creative solutions to designing and fabricating near-net-shape parts using powder metal (PM) technologies. Here are the seven Grand Prize winners of the 2015 contest.
Graphene 3D Lab has added graphene to 3DP PLA filament to strengthen the material and add conductivity to prints made with it. The material can be used to 3D print conductive traces embedded in 3D-printed parts for electronics, as well as capacitive touch sensors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.