Compared to other Plexiglas formulations, bio-based Rnew-maker Altuglas says it has greater melt flow and lower processing temperatures. Its properties, including impact resistance and chemical resistance, can be tailored, and it can be first extruded, then thermoformed with a high degree of detail, as shown here.
(Source: Altuglas International)
Tim, this material is specifically targeted for large-scale agricultural applications, as an alternative to poisonous sprays like Roundup and genetically modified (GM) crops. So is black petro-based plastic, but this material has even more benefits, since it can be plowed under, saving time and cost of removal, and saving the damage done if not removed.
Hopefully, this film is available to be applied in a large scale application. Many large scale farm plants have been genetically engineered to specifically resist herbicides (ie Round Up Ready Corn). This allows the farmers to spray the entire field to kill weeds while retaining their cash crop. If this film allows for the farmer to reduce the amount of herbicide and geneticallly engineered seed, it would only be a net gain to consumers.
Chuck, that appears to be lettuce or some other leafy vegetable. The thin film is mulch, which you put down around your crop plants to help keep down weeds and retain moisture in the soil. Many people use large sheets of black petro-based plastic, which is highly effective but does not biodegrade quickly and can leave harmful residues. I'm a gardener, not a largescale farmer, but I suspect it's put down before or during planting not after and holes punched through for the plants.
Tim, you are correct, it was the same material. In the instance I described, the bags in question were pre-formed to run on the type of machinery that packages sliced bread.
Can you imagine that material when making your kids' lunch sandwiches?
These may have been the same bags that Frito Lay introduced for their Sun Chips in 2010. They were so noisy and had a such a bad feel that the Sun Chip sales actually fell about 10% during the year that they were on the market. It would be great to see a non-noisy solution that would be bidegradable.
TJ, thanks for that input. I heard from several manufacturers of bioplastics and/or recyclable plastics (the BASF Ecoflex/Ecovio peanuts bag is both) that they had spent considerable time and effort getting feedback from users to overcome exactly the unpleasant characteristics you described. The BASF peanuts bag, for example, is not noisy like cellophane when you manipulate it and that specific problem was cited as one they had worked to overcome. So things have changed quite a bit in four years and these materials now exist--I've seen them--but they haven't yet been adopted in quantities that make them visible to end-users.
And of course, making so-called green materials from food crops, especially corn, is now a no-no.
Several of the new and noteworthy 3D printers in this slideshow are breaking some boundaries in build volume, new metals printing techniques, or working with high-profile development partners to ensure very high-quality parts and controls.
United Launch Alliance will fly 3D-printed flight hardeware parts on its rockets starting next year with the Atlas V. The company's Vulcan next-gen launch vehicle will have more than 100 production parts made with 3D printing. The main driver? Parts consolidation and 57% lower production costs.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
Although bio-based polymers face challenges from petroleum-based polymers, in certain markets they can displace the petro-based incumbents. Here are six new bio-based and renewable plastics for a variety of applications.
BASF has developed tools and initiatives to help engineers use more of its renewable materials in their designs, more effectively, as well as to build parts using them with more predictable performance.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.