Japanese producers continue to develop meteoric improvements in bioplastics for engineering applications. The newest is a stunner: NEC has developed a bioplastic that has better heat conductivity than stainless steel. The new material is aimed at new mobile phones and personal computers that are too small for fans and other devices used to remove heat. “In electronic product housings, the use of heat-conductive metals is considered to be one alternative to plastic for improving heat release,” NEC said in a statement. “However, heat conductivities in the thick direction of metal boards are too high and can cause partial or rapid increase in the temperature of housings near electronic parts that have high temperatures.”Previous attempts to use heat-conducting plastics for housings have been slowed by their high costs (due to 50 percent-plus content of fiber or stainless steel), poor moldability and high densities.
NEC has been researching alternatives using bioplastic, which has the same low heat conductivity as oil-based plastics. A new cross-linked structure between the resin matrix (polylactic acid) and carbon fiber is achieved through use of a new biomass binder. “This enables good heat conductivity in the plane direction of the PLA resin board, which is a characteristic conventionally difficult to attain in metal boards,” NEC said. A filling of 30% carbon fiber provides double the heat diffusion ability of stainless steel. NEC says it plans to begin mass production of the new composite in March, 2009, when it will seek new applications beyond housings of electronic products.
As reported by Design News, NEC has already developed bioplastics with kenaf reinforcement for mobile phone housings, a wall as shape memory bioplastics.
1.The biomass content of the new composite exceeds 90 percent, excluding the carbon fibers.
2.NEC says the new composite molds satisfactorily and has adequate strength for electronic products.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Some next-generation bio-based materials are superior in performance to their petro-based counterparts, but also face some commercial challenges. This is especially true of certain biopolymers, adhesives, coatings, and advanced materials.
Cars and other vehicles, as well as electronics and medical devices, continue to lead the use cases for the new plastics products we've been seeing, as engineers design products for tougher environments.
LeMond Composites, founded by three-time Tour de France cycling champion Greg LeMond, is the first to license a new carbon fiber production method invented by Oak Ridge National Laboratory (ORNL) that's faster, cheaper, and greener.
This month will mark the launch of the SpeedFoiler, a super-fast, ultra-lightweight foiling catamaran that can fly short distances over water faster than other foiling designs, in part because of its carbon composite materials.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.