New plastics/metal hybrids introduced at K 2007 by A. Schulman eliminate soldering for electronic parts and also create shielded housings. “Conductor paths and contact points for connectors and cables can be injection molded simultaneously,” says Thilo Stier, innovation manager, told me at the packed Schulman stand this morning. Traditional lead frame techniques are replaced by the hybrids, called TinCo. They consist of 15 percent thermoplastics, such as nylon; 30 percent of a low-melting alloy such as tin; and 55 percent copper fiber. Nylon is overmolded with the low melting metal in a two-barrel injection molding machine using conventional tooling. Siemens is a development partner. Five other OEMs are also beta testing the technology under secrecy agreements. The process was demonstrated at the K Fair on an Arburg press. Due to the high loading of copper, the hybrid has excellent specific electrical conductivity—greater than 106 S/m. Most plastic and elastomers can be used as the matrix in the compound. Cycle times are short due to the material’s high thermal conductivity.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
Researchers at the Missouri University of Science & Technology have designed a new nanoscale material that can transmit light faster than the 186,000 miles per second it usually takes to travel through air.
It has often been said that as California goes, so goes the nation. This spring, the state's wind power is setting energy generation records and solar energy generation is expected to rise sharply during the second half of 2013.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is