HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials

Aircraft Engine Maker Opens Additive Manufacturing Lab

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
Ann R. Thryft
User Rank
Blogger
Re: Traditional Manufacturing to AM
Ann R. Thryft   5/28/2013 11:38:42 AM
NO RATINGS
Chuck, most AM techniques require some post-processing, especially if it's metal parts. But that's also true of other manufacturing techniques such as injection molding and welding.



Ann R. Thryft
User Rank
Blogger
Re: Bringing critical technologies in-house
Ann R. Thryft   5/1/2013 12:16:25 PM
NO RATINGS
Lou, I agree with notarboca. There are several issues that must be overcome, but eventually they most likely will be overcome.

notarboca
User Rank
Gold
Re: Bringing critical technologies in-house
notarboca   4/29/2013 8:41:04 PM
NO RATINGS
@naperlou, you bring up good points about these technologies.  It may be a slow ramp up until these parts are common, everyday items in aviation, but I believe their time is coming.

Debera Harward
User Rank
Silver
Re: Traditional Manufacturing to AM
Debera Harward   4/29/2013 7:36:59 PM
NO RATINGS
Shehan you have raised a very good question , No doubt that additive manufacturing is the next booming technology but designing aircraft engine components will be risky with it

1.Type of metal created with this sort of manufacturing is still a question mark and will that metal be usefull enough to creat aircraft components

2.Secondly the material by this method is no doubt of  good quality but probably the surface will not  strong be smoothed will it be ok for crafts to fly ?

3.Will the manufacturing be strong enough to fly the palin in air ?

 

I have all these questions in my mind

 

Charles Murray
User Rank
Blogger
Re: Traditional Manufacturing to AM
Charles Murray   4/29/2013 6:31:12 PM
NO RATINGS
Aviation, with its relatively low production volumes, seems to be a logical place to apply this technology. I do find it interesting, however, that the parts still require a wire EDM process after the fact.

Ann R. Thryft
User Rank
Blogger
Re: Traditional Manufacturing to AM
Ann R. Thryft   4/29/2013 12:33:23 PM
NO RATINGS

AnandY, thanks for that detailed info on what GE Aviation is doing in its AM efforts.

As we mention in the article on the Lux Research 3D/AM report http://www.designnews.com/author.asp?section_id=1392&doc_id=262205 last fall GE Aviation acquired Morris Technologies http://www.geaviation.com/press/other/other_20121120.html, which was a 3D printing service bureau that produced mostly aerospace engine components.

shehan
User Rank
Gold
Re: Traditional Manufacturing to AM
shehan   4/29/2013 12:04:04 PM
NO RATINGS
@AnandY  - I knew that General Electronics was moving to Addictive Manufacturing. Do you see this as a reliable method especially for Aircraft Engines?

naperlou
User Rank
Blogger
Bringing critical technologies in-house
naperlou   4/29/2013 10:51:00 AM
NO RATINGS
Ann, this is an interesting trend in and it is typical of new technologies.  It is also good to see it happening here.  As AnandaY points out, Pratt & Whitney's biggest competitor is also starting to use this technology.  Actually, GE is using a lot more ceramics and polymers in their engines, and that manufacturing is being brought in house as well. 

Perhaps, as with the semiconductor industry, this will become a more standardized technology in the future.  The trend in semiconductors is to seperate fabrication (fab) from design.  On the other hand, in the early days of the insustry, it was fab that was the compettitive advantage.  That is what allowed Intel to keep its lead for so long.  On the other hand, Intel is now getting into the foundry business.

AnandY
User Rank
Gold
Traditional Manufacturing to AM
AnandY   4/29/2013 7:30:28 AM
NO RATINGS
Aviation industries are shifting from traditional manufacturing to Additive Manufacturing. Genaral Electric have also shifted to AM. GE is preparing to produce a fuel nozzle for a new aircraft engine by printing the part with lasers rather than casting and welding the metal.

Partner Zone
More Blogs from Engineering Materials
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Many of the materials in this slideshow are resins or elastomers, plus reinforced materials, styrenics, and PLA masterbatches. Applications range from automotive and aerospace to industrial, consumer electronics and wearables, consumer goods, medical and healthcare, as well as sporting goods, and materials for protecting food and beverages.
Engineers trying to keep track of the ever-ballooning number of materials and machines for additive manufacturing and 3D printing now have some relief: a free searchable database with more than 350 machines and 450 different materials.
At JEC Europe Dow Automotive introduced a new ultra-fast, under-60-second molding cycle time for its commercial-grade VORAFORCE 5300 epoxy resin matrix for carbon composites. It's aimed at high-volume automotive manufacturing.
A new online manual that describes in detail the range of commercial technologies for joining automotive aluminum components is available free from the Aluminum Association.
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service