As a reminder, bioplastics are defined as either biodegradable, or containing bio-based content, or both. They're all produced as an alternative to petro-based plastics, to decrease carbon footprint and form a sustainable alternative. For example, Cereplast's algae-based bioplastics are divided into two different lines: the Sustainables resins combine a high bio-based content with the durability and endurance of traditional plastic. They're aimed at automotive, consumer electronics, and packaging applications. But the company's Compostables resins target single-use applications, such as food service-related products.
It's also important to remember that purposeful, managed composting and biodegrading -- in landfills or anywhere else -- are two different things and result in a big difference in the amount of carbon dioxide that's released. When not managed, it can take many years for a biodegradable material to finish biodegrading, during which time it releases considerable amounts of carbon dioxide and may also leave undesirable residues in the soil. In contrast, correctly managed composting happens a lot faster, captures more carbon dioxide, and leaves little or (preferably) no residues. BASF has a helpful FAQ on the subject.
BASF says it introduced these grades because of the growing interest in certified compostable plastics among packaging makers. According to a new study by market research firm IHS Chemical, both legislative efforts and consumer pressure are combining to increase demand for biodegradable plastics. The report predicts that demand will increase by almost 15 percent per year between 2012 and 2017 in Europe, North America, and Asia. Europe remains the largest regional consumer of biodegradable plastics, and is responsible for more than half of the total amount worldwide by weight. Although food serviceware and food packaging remain the highest-volume application category, medical uses for biodegradable plastics are increasing.
Another fact I didn't know, Ann, but it makes sense. As consumers become more environmentally aware, it is just a no brainer that they want the companies providing the materials for a lot of products to do the same. Let's hope this starts to have a real positive impact.
Elizabeth, I was also surprised, and pleased, to discover that most chemical companies have been addressing sustainability issues for several years now. Pressure from consumers had a lot to do with this.
Thanks for the info, Ann. I didn't know that about DuPont. I think for some reason I had a bit of a negative view of that company in my head, growing up so close to Delaware (near Philadelphia) where the company had such an ominous industrial presence. i always thought they were just another socially irresponsible chemical company. Good to know I'm wrong!
Elizabeth, DuPont is another company that's been in the forefront of sustainability efforts, not just making sustainable plastics. I suggest you check out their website, too. http://www2.dupont.com/inclusive-innovations/en-us/gss/sustainability.html
Thanks for the link, Ann. I will definitely take a look. I guess I shouldn't be surprised, as companies purely devoted to sustainability and environmental friendliness are popping up all the time know. But sounds like BASF was at the forefront.
When researching the company last year, I discovered its commitment to sustainability goes back several years. I was also surprised that even my husband (in a very different field from this one) had heard of the company and its leadership in this area. Here's a link that will help: http://www.basf.com/group/corporate/en/content/sustainability/index
I'll definitely have to keep an eye on news from BASF. I think it's really great when a company takes such initiative to do something not only good for industry, but also for the environment. Responsible business practices are the future.
You're welcome, Elizabeth. Since there had been a lot of comments recently that indicated some readers were confused about the nature of bioplastics, I took the opportunity to clarify a few points again. BASF is a pioneer and leader in bioplastics, especially Ecovio compostable versions, and I( think they deserve kudos for this leadership, the R&D, and the productization/commercialization.
Thanks for such a comprehensive, informative article on bioplastics, Ann, and for staying on top of this fascinating and important space. I never knew what the differences were and it seems like there is quite a range. That said, I really like the direction BASF is heading with this compostabe and biodegradeable version of Ecovio. To think that all the plastic being used for food packaging could one day be bioplastic like this that can be reused and composted in an agricultural venue is promising, especially in a world where synthetic plastic has ruled for so many years and done such damage to the environment.
BMW has already incorporated more than 10,000 3D-printed parts in the Rolls-Royce Phantom and intends to expand the use of 3D printing in its cars even more in the future. Meanwhile, Daimler has started using additive manufacturing for producing spare parts in Mercedes-Benz Trucks.
SABIC's lightweighting polycarbonate glazing materials have appeared for the first time in a production car: the rear quarter window of Toyota's special edition 86 GRMN sports car, where they're saving 50% of its weight compared to conventional glass.
Design engineers play a big role in selecting both suppliers and materials for their designs. Our most recent Design News Materials Survey says they continue to be highly involved, in some ways even more than the last time we asked to peek inside their cubicles.
Daihatsu is one of the first carmakers to customize car exteriors using 3D printing's mass customization capabilities. Effect Skins -- small exterior bumper and fender panels in different colors and textures -- can be ordered for its Copen convertible.
Several new products in this group of new adhesives, coatings, and sealants are formulated to protect sensitive electronic components, or to seal components of commercial and military aircraft. Others are designed to operate in tough, messy, dirty oil & gas operations, or for rotary applications and motors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.