As the article states, the new material is not made of polyester fiberglass--it replaces polyester. The new material is a glass fiber composite made with pure polyurethane, which, as stated, can last up to 50. It replaces other materials, including polyester, which degrade faster.
I am surprised that they are looking at improving a poor solution using similar materials. Shouldn't we be looking at different materials that do not have inherent water damage issues? Maybe we should look at carbon componsite or carbon fiber materials. Certainly should be materials that don't degrade from water or UV.
Polyester fiberglass material is not as waterproof as we would like, THAT is the problem. What happens is that the water does flow up around the glass fibers and something does happen causing the material to break down, losing a lot of strength and eventually falling apart. Probably the higher quality stuff takes longer to fail than the poor quality stuff. The gel-coat does definitely delay the beginning of the capilary invasion of the water, so the gel coat is quite valuable in that aspect. So it may be that the actual polyester material is waterproof, but the fiberglass material that it is part of does fail from water absorbtion. So the accusation of lying is a bit to strong. I would say that the crime would be simplification, and making assertions based on seeing evidence that is quite complex to understand.
Agree, I found this really fascinating and it's good to see materials designers trying to come up with a new way to reinforce these important protections against big sea swells. Se walls will be particularly important if climate-change predictions come to bear and storms like Sandy become more frequent, as some think they will. But just n general to bolster the materials used in sea walls seems like a timely and worthwhile thing to do.
While this sounds like a great product, the sourcesare not truthful.
Polyster is waterproof which is proven by the fact gelcoat is polyster resin as the same person also states. Water gets in layups by traveling up the glass fibers by capillary action when the fiber end is exposed to water, etc. If as he says the fiber fill is 75-80% which I seriously doubt, there are many more fibers to suck up water, etc in his resin version.
Next the 75-80% fill isn't a resin fuction but a mechanical one. resin fill depend on how much space is between fibers, not which resin as long as it's thin enough.
Sadly this looks like a good product that doesn't need such lies they are offering. It makes me wonder if one can believe anything they say.
Dow Chemical and several other companies have launched a program in Omaha, Neb. to divert about 36 tons of plastics from landfills in its first phase, and convert it into energy used for cement production.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Some next-generation bio-based materials are superior in performance to their petro-based counterparts, but also face some commercial challenges. This is especially true of certain biopolymers, adhesives, coatings, and advanced materials.
Cars and other vehicles, as well as electronics and medical devices, continue to lead the use cases for the new plastics products we've been seeing, as engineers design products for tougher environments.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.