UK-based Plastic Logic and French company ISORG have created what the pair tout as a first in flexible printed electronics: a large area, conformable, organic image sensor printed on plastic. (Source: ISORG and Plastic Logic)
Excellent question, edsut. The answer to your first question, "doesn't every image sensor need a lens to properly focus in on some field of view?" is yes, but... A very accurate lens is only needed for taking pictures. We have been trained to think of image sensors as being used in cameras for increasingly sharp, accurate and realistic pictures, especially in machine vision. But in motion sensing, an image sensor such as the Kinect's doesn't have to "see" your gesture very well--it just has to sense the position and direction of your arm or other body movements, aided by a depth sensor for 3D and a tracking chip. Then the motion capture software takes over to decide what your gestures mean. The Kinect lens is small, round and unsophisticated. There's a good Wikipedia article on the subject. Regarding flexible lenses, the human eye has a flexible, curved lens, and some curved Fresnel lenses (used in lighthouses) are flexible. So are intra-ocular lenses implanted in the eye for correcting myopia.
Interesting, and note, I'm no optics expert, but doesn't every image sensor need a lens to properly focus in on some field of view? If the sensor is flexible, then doesnt' that make it tougher for the lens to do its job?
Interesting comment, William, since making flex circuits that don't break was one of the big challenges in the earlier days of this technology's R&D. I see your point about applications--flex image sensors could be used in many places where traditional rigid image sensors couldn't go before.
What has not been mentioned is the improvments in ruggedness and durability that would come from the circuitry not breaking when flexed a bit. That should open up a realm of applications where previously a display or sensor would have broken during normal use. A flexible image sensor could watch stamping die activity from a much closer viewpoint, for instance.
Even if they're not actually Dick Tracy-style, flexible wraparound watches and wristbands are definitely a possible application for this technology, as they are for other printed flex sensor technology. For example, those health-monitoring wristbands that take your temperature, heart rate and other data during exercise. Now they could record image data as well.
I especially appreciate the flexible nature of this technology. 'Wearable' smart devices (i.e. wristband) could become more of a reality with the ability to curve or bend the display surface. I would imagine the flexibility of this display surface would open up many new markets for innovative display applications.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
The latest crop of coating and sealant materials and devices has impressive credentials. Many are designed for tough environments with broad operating temperature ranges, and they often cure faster, require fewer process steps, and produce less waste.
A new program has been proposed for testing and certify 3D printing filaments for emissions safety. To engineers who've used 3D printers at home this is a no-brainer. It's from a consumer on Kickstarter, and targets use in homes and schools.
For the last 50 years, the Metal Powder Industries Federation (MPIF) has sponsored an awards competition for creative solutions to designing and fabricating near-net-shape parts using powder metal (PM) technologies. Here are the seven Grand Prize winners of the 2015 contest.
Graphene 3D Lab has added graphene to 3DP PLA filament to strengthen the material and add conductivity to prints made with it. The material can be used to 3D print conductive traces embedded in 3D-printed parts for electronics, as well as capacitive touch sensors.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.