A titanium bone rasp for hollowing out femurs before inserting an implant can be custom-designed for a specific patient's bone using EOS' laser sintering additive manufacturing technology. (Source: Within Technologies)
Folks, the discussion here about SawStop potentially being applied to robots working with humans gave me an idea. Please check out this post about possibly starting a Design Ideas forum and tell us what you think: http://www.designnews.com/author.asp?section_id=1392&doc_id=259964
78RPM, I agree about 3D printing making stuff that's too complex to do any other way. That's definitely one of its big draws. BTW, the photo in this story doesn't show the $70 titanium part that bone grows around; that's an acetabular cup. The photo shows a titanium bone rasp for hollowing out femurs, as the caption states.
Even more than changing the production lines, that sawstop works at the expense of saw functionality. Consider that it stops the blade with a ridgid stop lever jammed into the swas teeth. So it does stop fast enough to prevent an injury , which is within one tooths distance on the blade. So the blade attachment may be damaged, and for sure the blade is sort of reshaped a bit, and that expensive stop actuator must be replaced, since the high presure charge has been used. So your saw is out of business until the expensive part is replaced. That may be OK for a home experimenor but it will be a big problem for folks using the saw for making a living. Then there is the question about what if you don't replace the driver, but instead just remove it. That means that you have defeated a safety device, and can be attacked by the OSHA man.
So while the sawstop is an interesting device, it is a big burden as well. Next question is how many folks do cut off fingers every year? Not that many, I don't think.
It's also easy to see why the power tool industry resists the technology, William K. The idea of implementing this technology raises the possibility of having to invest gigantic amounts of capital to re-tool their existing production lines.
Charles, The interesting point associated with that SawStop invention came from the scientist that I was working with at a previous job. He pointed out that nobody makes any money off of safety devices until you can get the government to force everybody to use them. Examination of the safety things that we have today does show that it is absolutely correct. So in re3ality it is seldom about safety, it is always about profit.
If everybody really wanted the safest car possible we would all be driving Volvos, but as you can see some folks consider other aspects to be more important.
And some safety features only benefit those who should be limited to driving speeds of under 20MPH, specifically the new stability control systems that we will be forced to purchase in the near future. One more reason to stick with older model cars.
Agreed, William K. There are several reasons why saw manufacturers didn't rush to adopt SawStop -- another of which is the licensing fees. I have to admit, though, the story of the SawStop inventor is an intriguing one.
These new 3D-printing technologies and printers include some that are truly boundary-breaking: a sophisticated new sub-$10,000, 10-plus materials bioprinter, the first industrial-strength silicone 3D-printing service, and a clever twist on 3D printing and thermoforming for making high-quality realistic models.
Using simulation to guide the drafting process can speed up the design and production of 3D-printed nanostructures, reduce errors, and even make it possible to scale up the structures. Oak Ridge National Laboratory has developed a model that does this.
Engineers need workhorse materials with beefy mechanical properties for industrial designs made with 3D printing. Very few have been designed from the ground up for additive manufacturing, but that picture is beginning to change.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.