HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Engineering Materials
Metal/Plastic Car Wheel Boosts MPG
2/8/2013

The eVOLVE Hybrid Wheel made of metal and plastic, designed for the 2012 MYFord Focus SE, has shown an increase of 1.1 MPG highway in third-party tests, compared to the car's standard production wheel.  (Source: Lacks Wheel Trim Systems)
The eVOLVE Hybrid Wheel made of metal and plastic, designed for the 2012 MYFord Focus SE, has shown an increase of 1.1 MPG highway in third-party tests, compared to the car's standard production wheel.
(Source: Lacks Wheel Trim Systems)

Return to Article

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/4  >  >>
Ann R. Thryft
User Rank
Blogger
Re: News to me
Ann R. Thryft   2/12/2013 4:31:08 PM
NO RATINGS
Rigby5, I've asked the company to address some of the issues raised in the comments here. Meanwhile, regarding holes, it's my understanding that these were in fact reduced in this wheel in part by the plastic fill and in part by the redesign. Also, this is a cutaway diagram, so much of the apparent " holes" on the right are not actually there in the finished wheel.

Elizabeth M
User Rank
Blogger
Re: News to me
Elizabeth M   2/12/2013 2:23:58 PM
NO RATINGS
Ah, I see...well as always you are on the cutting edge of coverage, Ann. I should have known! :) In all seriousness, I do like the way designers are thinking outside of the box (or in this case, the power train) to come up with new ways to be more fuel efficient and economical.

Rigby5
User Rank
Platinum
Re: News to me
Rigby5   2/12/2013 11:16:48 AM
NO RATINGS
While I can see that wheels can be made lighter and save gas, this does not seem like such a serious attempt.  To reduce drag as much as possible, the wheel should really have no holes or ridges at all.  In fact instead of a Moon, the wheel should be dished in order to smoothen linear air flow.  Brake cooling should be air from below the car being ducted behind the wheel.  In fact, the whole bottom of the car should be smooth, totally unlike what they do now. 

So I can't really take this article that seriously, because obviously car makers and buyers really don't care.  Otherwise they would have addressed these more glaring issues.  Instead, the main factor for wheels must be cosmetic, with wheels having larger and larger openings these days, when they really should have no openings at all.  The trouble is the customers are ignorant and the makers don't want to educate them. 

And what I would really like to see is a comparison with all plastic wheels, such as fiberglass or graphite composite.

Ann R. Thryft
User Rank
Blogger
Re: Huge improvement
Ann R. Thryft   2/12/2013 11:01:06 AM
NO RATINGS
As Lacks said in the story, it's not just lighter weight, but also better aerodynamics that result in the 1.1 MPG improvement, as shown by the third-party tests.

Ann R. Thryft
User Rank
Blogger
Re: News to me
Ann R. Thryft   2/12/2013 10:56:05 AM
NO RATINGS
Elizabeth, the company said that working on wheels to improve MPG is a relatively new effort in the industry.



ChrisP
User Rank
Silver
Re: Cost Benefit
ChrisP   2/11/2013 9:40:12 PM
NO RATINGS
I don't believe you know enough about wheel aerodynamics to make that statement.  I don't believe that Ford couldn't make that same wheel out of aluminum.  There are certainly wheels that are even more aerodynamic. Despite their claims car companies are not really interested in aerodynamics otherwise they would make them aerodynamic.  Cars today are still far worse drag wise than the cars like the Jaray in the 1930's.  Car companies are intrested in making profits these days not selling transportation. 





William K.
User Rank
Platinum
Metal and plastic wheel
William K.   2/11/2013 9:12:33 PM
NO RATINGS
This new wheel design looks like it keeps the same flaw that most aluminum wheels carry, which is that they corrode and develop rim leaks. That may not be a problem in south cal, but here in Michigan there are tons of salt dumped at the first hint of snow, and it is far worse then the navy salt-spray test could dream of being. So  wheel with a good plastic in the seal area would be an improvement indeed. I really find it hard to believe that the streamlining gives a 1.1MPG improvement, or even a 1.1% improvement, unless it is being compared to the most non-aerodynamic design made. 

One other question is about how the plastic portion holds up with the fairly common problem of disk brakes binding and getting really hot. That happens a bit with some Chrysler product vehicles, I have found. They knew about that problem in 1976, they have not solved it by 2005. Reduced it some, but not solved.

William K.
User Rank
Platinum
Metal and plastic wheel
William K.   2/11/2013 9:12:09 PM
NO RATINGS
This new wheel design looks like it keeps the same flaw that most aluminum wheels carry, which is that they corrode and develop rim leaks. That may not be a problem in south cal, but here in Michigan there are tons of salt dumped at the first hint of snow, and it is far worse then the navy salt-spray test could dream of being. So  wheel with a good plastic in the seal area would be an improvement indeed. I really find it hard to believe that the streamlining gives a 1.1MPG improvement, or even a 1.1% improvement, unless it is being compared to the most non-aerodynamic design made. 

One other question is about how the plastic portion holds up with the fairly common problem of disk brakes binding and getting really hot. That happens a bit with some Chrysler product vehicles, I have found. They knew about that problem in 1976, they have not solved it by 2005. Reduced it some, but not solved.

William K.
User Rank
Platinum
Re: Way too much waste
William K.   2/11/2013 9:01:53 PM
NO RATINGS
Not only is remote start a silly accessory, it is a source that delivers 100% on pollution, since the car warming up driverless for half an hour, or even just 15 minutes is just burning fuel delivering no travel value at all. All the warmup time the engine really needs is the time that it takes me to fasten my seatbelt after starting the engine.

Ann R. Thryft
User Rank
Blogger
Re: Cost Benefit
Ann R. Thryft   2/11/2013 8:14:04 PM
NO RATINGS
The whole point is the 1.1 MPG saved. There are no other wheels that can do that, so a monetary cost savings comparing this wheel to others that can't save 1.1 MPG wouldn't be very useful.

<<  <  Page 2/4  >  >>
Partner Zone
More Blogs from Engineering Materials
An MIT research team has invented what they see as a solution to the need for biodegradable 3D-printable materials made from something besides petroleum-based sources: a water-based robotic additive extrusion method that makes objects from biodegradable hydrogel composites.
Polish design firm NAS-DRA has proposed parasitic robotic drones that capture carbon dioxide from the air during the day and release it at night to plants growing on their wings.
Alcoa has unveiled a new manufacturing and materials technology for making aluminum sheet, aimed especially at automotive, industrial, and packaging applications. If all its claims are true, this is a major breakthrough, and may convince more automotive engineers to use aluminum.
NASA has just installed a giant robot to help in its research on composite aerospace materials, like those used for the Orion spacecraft. The agency wants to shave the time it takes to get composites through design, test, and manufacturing stages.
The European Space Agency (ESA) is working with architects Foster + Partners to test the possibility of using lunar regolith, or moon rocks, and 3D printing to make structures for use on the moon. A new video shows some cool animations of a hypothetical lunar mission that carries out this vision.
Design News Webinar Series
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service