Justin is a humanoid robot being developed by the German Aerospace Center (DLR) for tasks that are too dangerous for humans, such as repairing orbiting satellites. Like humanoid robots designed for home use, humanoid space robots must be dexterous, mobile, and capable of carrying out tasks that require complex manipulation of tools and objects. They also need to be intelligent and have the ability to undertake manipulations that involve the use of both hands. Justin has compliant-controlled lightweight arms and four fingers on each of its two hands. It's remotely operated by a human, and its mobile platform allows it to operate autonomously at longer ranges. The platform has individually movable, spring-born wheels to match the robot's upper body movements during manipulation tasks. Also contributing to the robot's autonomy are photonic mixer device (PMD) sensors and cameras that allow it to make 3D reconstructions of its environment. Eventually, Justin will be mounted on its own satellite. (Source: German Aerospace Center)
Rob, I think you're right about that. Humanoid robots are mostly designed to interact with humans or equipment built for humans. They're not particularly useful otherwise, and would be over-designed in many cases, or just not functional.
Rob, I think the primary motivation for robot anthropomorphism is advertising. If you're trying to get more funding for your project and the way you do that is by demonstrations to non-engineers, then you want to make it as visually compelling as possible. People easily identify with the human form. However, if you're trying to do real science, function has to come first.
Then again, symmetry forces a lot of design choices that just happen to be anthropomorphic, or, at least, naturally inspired. For example, if you have two robotic manipulators and a set of sensors to observe what the manipulators are doing, you'd naturally want to put the sensors in between them and on a mast that can point the sensors in the desired direction. It's not biologically inspired, it's just a logical configuration. And if encasing the sensors in a humanoid head sells the project without affecting funtionality, why not do it?
Ann, I understand that fifedoms exist in inducstry, and there's nothing wrong with healthy competition since it often generates multiple good ideas. There are brilliant minds in each NASA center, and I think we'd get better results if they colaborated more instead of sabotaging each other's work.
Ann, I'm not too surprised there are not many humanoid robots in space. I would think function trumps all other considerations in space. Thus the robots are going to resemble what is required for function.
Thanks for the history, SparkyWatt. I thought I remembered it was a cutback in fed funds, not a lack of will from NASA, that stopped further moon exploration. I agree with Warren, they could have been long-term stars with continued exploration. Cutting their funds short was a tragedy.
btwolfe, I've read a lot about Robonaut's design, and you're right, there's a lot available online about it. Just thought you might have some other interesting tidbits to share, but we understand if you can't. Your comments about NASA fifedoms sound a lot like other industries, as well.
There's plenty of online resources about Robonaut and related work on the NASA website and elsewhere, so I won't elaborate. If it's not redily aparent, Robonaut 2, Centaur, and Spidernaut are all from the same team of engineers.
As to other blogger's comments about why NASA has not been more of a leader in innovation, it's partially because there's a lot of fifedoms in the agency and some of them will not be content unless their group is the only one doing a certain of type of work. I've seen plenty of comments and behavior by NASA "bosses" that serves to exclude other divisions (e.g., JSC vs Ames vs JPL) to the detriment of the agency as a whole. When these groups are forced to work together, they only do so grudgingly. Most of the NASA people are truly interested in doing good work, but it only takes a few power-hungry people to spoil it for the rest.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
