A robot collecting oceanographic data in the Gulf of Mexico got a close-up look at Hurricane Isaac last week as the eye passed 60 miles east of where the robot was cruising.
A Wave Glider developed by Liquid Robotics and launched by the National Oceanic and Atmospheric Administration (NOAA) was minding its own business collecting ocean chemistry and other data when the storm changed direction and passed over the robot, dubbed G2, according to a Liquid Robotics press release.
The seven-foot Wave Glider is a solar-powered surfboard with a propulsion system and sensors to measure water temperature, wind speeds, barometric pressure, and air temperature. Scientists are starting to use these robots in their exploration of the oceans.
A graphic shows wind speed data from Hurricane Isaac recorded by a Wave Glider robot in the Gulf of Mexico during the storm. The Wave Glider, developed by Liquid Robotics and launched by the National Oceanic and Atmospheric Administration, is a seven-foot-long surfboard with a solar-powered boat propulsion system and sensors to collect oceanographic and weather data. (Source: Liquid Robotics)
The Wave Glider provided data about what it was like in the Gulf during the storm, which featured sustained wind gusts of up to 74 knots and barometric pressure that fell to 988.3mbar, according to Liquid Robotics. Isaac battered Louisiana and Alabama last week, leaving floods and other damage in its wake.
Bill Vass, the company's CEO, said in the press release that the survival of the robot and its ability to transmit data in the face of severe winds and ocean waves was a testament to its sturdy design and bodes well for the future use of the gliders in hurricane research and prediction. "Hopefully, autonomous platforms like the Wave Glider will make it possible to better predict the severity and risk to everyone in the Gulf Coast area in the future."
As the G2 Wave Glider braved Hurricane Isaac, another Wave Glider, dubbed Alex, was on the other side of the Gulf near Puerto Rico as part of a joint project by the NOAA's Atlantic Oceanographic and Meterological Laboratory (AOML) and Liquid Robotics to study hurricane activity in the region. Alex is using its sensors to measure ocean and air conditions both above and below the surface of the water to help predict when the next hurricane will occur and also when it might increase in intensity, according to Liquid Robotics.
Tracking hurricanes isn't the only use scientists are finding for the Wave Gliders. As we reported last week, they are also exploring the Pacific Ocean near San Francisco as part of a wireless network of sensors and buoys that Stanford University researchers are using to track sharks.
The NOAA says it also has deployed Wave Gliders as part of a network of buoys in the Gulf of Mexico to measure the potential for tsunamis after earthquakes.
You are correct, this probably would fall into a catagory of projects in which the government ought to be involved. The question in my mind is "Can a body that changes composition every two years keep the continuity required for a project that might go on for twenty years?". The record to date is not encouraging without an outside "special interest" group to keep them on point.
Design Engineer - While I am generally the first guy want to keep the government out, I wonder if this is one of the few instances where goverment involvement is a good thing. The primary goal of this is security (from the weather in this case), which is one of the functions of government.
A little Googling showed (what you probably already knew), that Liquid Robotics is VC funded, backed by investors VantagePoint Capital Partners. Guess I'll just have to wait for their IPO-!
Jim, interesting perspective from someone right there in the heart of the action. I agree with the potential for Wave Glider's adoption by government agencies. So does its manufacturer, Liquid Robotics. Last month the company created a wholly owned federal subsidiary for selling to the US government.
Living in South Florida, we're particularly cognizant of much of the NOAA and National Hurricane Center activities, as they are news-reeled on a regular basis each time a Hurricane meanders across the Atlantic basin. Knowing that both are government funded agencies, and also being somewhat familiar with the predictive technologies they routinely leverage, these waveboard mechanisms may encounter a surge in agency deployments considering this one's robust survival and demonstrated capability during/after Isaac. ( Wonder if we know the Stocker Ticker Symbol-? )
The Gulf is one of several locations where NOAA has deployed tsunami tracking devices. According to this NOAA website
http://oceantoday.noaa.gov/trackingtsunamis/welcome.html
the real-time monitoring systems, called DART, are also deployed in the Pacific and Indian Ocean basins. Wave Glider looks like a good candidate for replacing the buoy/sensor combo currently used.
Counting on the government to accomplish a long term project correctly is an iffy situation at best. An organised group of private individuals with a common intrest gives you a better chance of long term continuity of goals. Including lobying for government fundig where applicable.
I'd just like to point out that the storm also hit (and I quote a major 'news' agency) "that land mass between Louisianna and Alabama" (also known as Mississippi).
Great idea, but good luck getting government funding in this political climate. It would be a natural addition to systems already put in place to track tsunamis, say, outside of Hawaii, or monitoring the water heights near the levees in New Orleans.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
