HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog

Robots Learn to Pick Up Oddly-Shaped Objects

NO RATINGS
< Previous Page 2 / 2
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/3  >  >>
Rob Spiegel
User Rank
Blogger
Re: Manipulators
Rob Spiegel   5/30/2012 11:35:48 AM
NO RATINGS
That makes sense, Ann. The quality of the robot's ability to learn from trial and error is also a significant aspect of this development.

ttemple
User Rank
Platinum
Is the glass half empty, or half full
ttemple   5/29/2012 9:15:35 PM
You can look at this and marvel at how far we've come, and you can look at it and marvel at how far we have to go.

Tim
User Rank
Platinum
Pick points
Tim   5/29/2012 8:21:26 PM
NO RATINGS
This technology seems to allow for a certain amount of forgiveness in the pick location for larger objects.  It would be great to have a cell that can easily adjust to different parts as they come down the assembly line.  This would allow for touchup free product changes.  That would be great.

jmiller
User Rank
Platinum
Re: A Solution looking for a Problem
jmiller   5/29/2012 8:10:45 PM
NO RATINGS
I agree I don''t know that I see an application for an adaptable gripper.  But I do believe the ability of robots to pick up parts and hold them in place perhaps to be welded by another robot would be an application where this would be helpful.  But on the typical assembly line the job is going to be repetitive and follow the same steps again and again without having to adapt.

jmiller
User Rank
Platinum
Re: Manipulators
jmiller   5/29/2012 8:07:58 PM
NO RATINGS
I really liked the article.  I don't know if I completely understand the inner workings of the pressure adaping inside of the big blue ball, but the statistics of success for picking up parts is pretty cool.

jmiller
User Rank
Platinum
Re: Manipulators
jmiller   5/29/2012 8:06:29 PM
NO RATINGS
I like the ability of the robot to adapt and learn according to it's memory or history.  no matter what the robot or technology in the robot I just love to hear about how the SW is learning.

GlennA
User Rank
Gold
A Solution looking for a Problem
GlennA   5/29/2012 4:12:07 PM
NO RATINGS
I have had a bit of experience with assembly lines.  I can't think of any application for this gripper.  Printed circuit board assembly needs very fast small part placement with vision compensation, or fast very fine placement of large parts with many leads, using vision compensation.  I have only seen vacuum nozzles used.  I can't see this gripper being used in a high-speed vision application.  In automotive speed, accuracy, and payload are important.  I don't think this gripper has any of these 3.  Even where I have seen off-line programming using 3-D modeling, an actual human had to step through the program to touch-up positions and movements.  Robots, aka Flexible Automation, vs. 'hard automation', was the answer to changing products.  The gripper or 'end effector' is always customized to the application.  The part must be both 'picked' and 'placed'.

To belabor the point:  I don't think this gripper could pick up a 1mm x 2mm chip, take a vision shot, and then place it into a solder screened location, and do it again 1/10 second later.  I also doubt that it could pick up a 50 lb bag of flour and place it to a pallet.

The gripper and the algorithm are interesting research, without a current practical application.

Ann R. Thryft
User Rank
Blogger
Re: Manipulators
Ann R. Thryft   5/29/2012 3:15:57 PM
NO RATINGS
The point here is that, with a less expensive universal gripper, such as Cornell's, plus the algorithm the team invented, a robotic assembly line can quickly adapt to optimally picking up all kinds of new objects with different sizes and shapes that it's never encountered before. The alternative, which we've heard a lot about in DN articles and comments, is lengthy and expensive programming in 4D, presumably with highly specialized grippers. This would be a big benefit in assembly lines, especially those of EMS, which are continually changing products.

Rob Spiegel
User Rank
Blogger
Re: Manipulators
Rob Spiegel   5/29/2012 1:17:30 PM
NO RATINGS
Right now this looks like a technology development seeking a solution. As the robots develop, solutions will appear. I've seen this notion of robots learning how to do things by trial and error. That's impressive. 

GlennA
User Rank
Gold
Re: Manipulators
GlennA   5/29/2012 12:37:33 PM
NO RATINGS
Ann R Thryft;  Yes, optimal vs. non-optimal is the clarification.  For some applications the optimal gripper is vacuum cup(s).  The human hand is a very versatile end effector.  Duplicating it is not easy.  There could be applications where this gripper would be optimal, but I don't think the water glass is one of them.

<<  <  Page 2/3  >  >>
Partner Zone
More Blogs
Take a look at the top 20 US undergraduate engineering programs. Then tell us -- did your school make the cut?
Engineers at the University of San Diego’s Jacobs School of Engineering have designed biobatteries on commercial tattoo paper, with an anode and cathode screen-printed on and modified to harvest energy from lactate in a person’s sweat.
A London-based company has added some sweetness to the versatility of the 3D printing market with a printer designed solely to print candy and confections.
Programs to boost domestic manufacturing combined with technological advances are bringing production back to the US.
Google's Project Tango is in its second iteration, this time taking the form of a tablet. Join us as we unravel the new goodies that Google has packed into the Project Tango Tablet.
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 8 - 12, Get Ready for the New Internet: IPv6
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service