CADFusion Built Around Motion Control

CADFusion takes incoming drawings into defined shapes and entities.   (Source: CADFusion)
CADFusion takes incoming drawings into defined shapes and entities.
(Source: CADFusion)

Return to Article

View Comments: Oldest First|Newest First|Threaded View
<<  <  Page 2/2
William K.
User Rank
CadFusion, "G" codes, and CONfusion
William K.   1/29/2013 7:35:52 PM
I donh't have much experience with G codes, which is because I do have some experience using G codes for single axis motion control. That was quite a challenge to write even a faily simple back-and-forth motion program, with a "return home after jam" function added. At that point I decided that I would use alternative control methods in future machines, and I never touched G codes again. Many servoc system suppliers have been eager to provide programming languages and hardware that has been much simpler and more effective.

Is it possible that the G coding process has become that much simpler and user friendly? Or is it that the interfacing programs have removed the grief and pain?

User Rank
Re: CadFusion, "G" codes, and CONfusion
ttemple   1/29/2013 8:25:28 PM

"G code" was really developed for "Numerical Controls" (NC), which evolved into "Computer Numerical Contros" (CNC's).  It is reasonably well suited for that environment (machine tools), but is not really so well suited for general purpose motion control (in my opinion).  I believe the history of "G code" is related to the simplistic nature of the first numerical controls, and the use of paper tape readers to transfer data directly to registers in the control.  Each data element had a single character prefix (Address) to route the data from the tape to the appropriate register in the control.  The "G" address referred to "General" codes, I think.  Typically "F" was feedrate, "S" was spindle speed, "M" was "Misc" code (usually used to turn some on/off device on or off - coolant, spindle, etc.), and "T" was Tool code.  "G" was used to toggle motion related settings, such as feed or rapid, linear or circular interpolation, select cutter diameter compensation direction, and things like that.

Modern "Computer Aided Machining" (CAM) packages take cad data in, and output cutter path data.  Usually CAM software generates the cutterpath in a "neutral" language first.  Then that data is "Post Processed" to generate "G code" that is suitable for some specific machine tool.  Most CAM packages include a large number of "Post Processors" (Posts) that will translate the neutral language output to formats suitable for many common controls.

As such, a programmer doesn't need to know much about "G code" any more.  An analogy might be that web programmers can use tools that don't require an in-depth knowledge of HTML anymore.  The tools hide the details.  Similarly, once the "Post" is configured in a CAM package, the programmer can focus on creating machining operations without really caring much about the output language.

There is some effort to blur the lines between CAD and CAM packages, but under the hood there are standard interface points that are worth maintaining.  For example, many CAD programs use the "Parasolid" engine as the underlying geometry description engine.  CAM programs know how to read common native data formats, as well as formats that are designed for data interchange, such as IGES.  I consider it a good thing that many vendors can participate due to the somewhat standard interface points between CAD, CAM, and controllers.

User Rank
Re: CadFusion, "G" codes, and CONfusion
ronrek   1/30/2013 9:01:59 AM
G code, the ISO 6983/RS274D programming standard, was created as a common programming syntax for CNC controllers.  This is why most of the CAD to Toolpath applications support this format.  But as another person on this thread has mentioned if you are using tools like CADFusion you don't have to be an expert at G Code syntax as the application creates the output.  You do need familiarity however if you want to edit the resulting code on the machine. 

Most newer controllers will offer alternatives to programming in G code for user that don't have exposure to this language.  These languages can have basic-like syntax. The following two sets of program lines provide a comparison between a G code program and a more transparent syntax:

RS274 G Code:

G21 ;Metric programming units

G1 X10 Y20 ;Linear Interpolation

G0 X0 Y15 ;Rapid Move

The same 3 commands in Aerotech's basic syntax:




There are other methods of transferring CAD data to machine tools besides G code.  StepNC was developed as a replacement for the RS274 standard and NURBS is used for 3D surfaces.  


User Rank
Re: Looks like junk
mtripoli3   1/30/2013 11:25:07 AM
Simply put, "Hey, machinists. Check out this program, it works great."

Check what out? 

No downloads.

No advertised price.

Small screen shots that are not readable.

Looks like the only way to get any info is to fill out the "Request Quote" form. 

Stated by "ronrek": "It is CAM for 2D laser processing with output to support Aerotech CNC control platforms.  It does not support milling and turning applications.  Entry/exit paths, tool diameter, process speeds are all settable within the application". So really this is proprietary software to run on a dedicated system.

"State of the art, might be an over statement, but you would feel strongly  when it is accurately creating a part from a solid model".

What is it creating a part of? A 2D outline? This statement is a bit misleading, is it not? It has been stated, this is software to run a proprietary laser. It is not a "general tool" for creating actual 3D parts. This entire article smacks of nothing more than "bait and switch" for drawing people to Aerotechs website, not as an actual, usable tool. This wouldn't be so bad if it was stated as such, but to imply that it is a free-standing software package (like those from Vectric) is a bit hard to swallow. 


User Rank
Re: CadFusion, "G" codes, and CONfusion
mtripoli3   1/30/2013 11:42:21 AM
So another terse layer of code interpretation on top of a relatively simple text file. Replacing the "G code" G1 with the word "LINEAR". Adding another level of abstraction is hardly helpful.

Anyone that is working on a machine should have at least a passing familiarity with G and M code. At its core, there are only three "G" codes needed to do anything on a simple XY system. If understanding these three codes eludes one, they should perhaps find something else to do, perhaps something in the fast food industry.

William K.
User Rank
Re: CadFusion, "G" codes, and CONfusion
William K.   1/30/2013 9:24:22 PM
The "G" code that I commented about was for a "sort of simple" linear motion system that was part of an industrial testing machine. I did make it work in a reasonably short time, but I found it inconvenient. The next hundred industrial testing machines did not need that sort of motion control system, so as long as I recorded what was done and what was programmed all correctly, why become an expert on a language that I never used again.

<<  <  Page 2/2
Partner Zone
More Blogs
An attack on the grid could do mammoth damage and experts say our power plants are the least equipped to withstand cyber attacks.
Thalmic Labs' Myo is an arm-worn device that lets users control computers, smartphones, drones, and other digital devices using only hand and arm gestures.
The big data processing of 3D simulation is now blended into CAD programs to ease and speed the design workflow.
If a major catastrophe strikes your area, will you be prepared? Do you know how to modify the tech you've already got or MacGyver what you need to fit your own situation? A free, five-day Continuing Education Center course starting April 6 will show you how.
EDN and EETimes are welcoming nominations for their ACE (Annual Creativity in Electronics) Awards.
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service