A French artist and designer named Gael Langevin has taken the idea of a “build your own robot” kit to the next level through an ambitious hobbyist project called InMoov. The open-source project’s ultimate goal is a full-sized animatronic humanoid robot that can be printed and assembled by anyone with a 3D printer.
Langevin writes a detailed
blog about the project, charting its progress every step of the way by sharing sketches of his work and the trial-and-error process of designing the robot. The blog also includes the printer files for the robot for free download. The robot can then be assembled from those parts and off-the shelf electronics at a cost of less than $1,000. The robot’s parts are mainly made using acrylonitrile butadiene styrene, or ABS, plastic material.
Through his InMoov project, French artist and designer Gael Langevin is working on a humanoid robot that can be printed with a 3D printer then assembled at home. So far he has completed the robot’s head, arms, and hands, and is working on its torso. (Source: Gael Langevin)
Langevin -- who works as a sculptor and model maker for Factices Ateliers -- has so far finished the head, arms, and hands of the robot, which looks like an albino and a slightly more lifelike C3PO from the Star Wars films. He is currently working on its torso, according to his blog.
To program the robot, Langevin used a number of sketch programming languages, including Serialterm, MyRobotLab, and Arduino.
Langevin’s blog also includes a forum where people working on building the robot can share tips, ask questions, and generally geek out over the project. It is also a help center for assembly of the robot at home, with a photographic step-by-step guide to building it.
The artist has some fairly ambitious plans for a homemade robot in terms of capabilities, according to the blog. Voice recognition and object detection are among Langevin’s goals for his 3D-printed humanoid robot, which in a recent video can be shown already responding with movement to voice commands (watch it below).
In addition to the printer, in order to assemble an InMoov robot, you will need:
12 MG995/HK2598 servos
Eight Hitec HS805BB servos
0.8 mm nylon thread (or fishing line)
6V 44A batteries and charger, among others
There seems to be no end to the number of things that can be created using a 3D printer these days. Auto parts, reproductions of old recordings, and even haute couture clothing have now been printed this way, and the list of possibilities for 3D printing keeps growing.
Elizabeth M, Your quite welcome. Time and resources are key to creating personal technology on your own time. Thanks for presenting this article to the Design News community.
This is indeed the starting of a new era in what can be made. The biggest limitations on what can be made have been reduced to limitations on material properties and limitations on what can be drawn in a 3D view. I am not aware of any printing system that works from the traditional three view drawings. The materials limitation is the same one that dogged DaVinci, in that the materials for his designs were simply not available yet. Likewise, the less expensive 3D printers are limited in material capabilities and material strength. Those systems delivering steel alloy parts are far above the hobby class, at least as far as prices go. Probably the best short term option would be for a way to purchase unused 3D printer time on machines able to use the desired materials. Sort of like "cloud" production facilities. Is anybody marketing that yet?
There are plenty of 3D printing companies out there willing to print your work for fairly cheap. However, I think you mean every-single 3D printer being used at all times. I have a friend who’s day job has one. It’s hardly ever used. How to organize a way to have it print any project, then ship it to the end customer seem impossible. However, I might be thinking too myopically.
C
There certainly are a lot of 3D printers around, but a lot fewer of those able to print steel or other metals. That capability is a lot more expensive, both machine and supplies, and it seems that organizations that own such a machine that is not fully utilized could do printing for others to provide a better ROI, based on a greater sysem utilization.
I keep looking at the photo of this robot--it's so French! By that I mean elegant, sophisticated and with lovely lines. And I'm saying that about a piece of plastic that barely looks like a person!
Ha, Ann, your comment made me laugh! But it's true...the French obviously have that "je ne sais quoi" even when it comes to robots. They're like Italians that way--always paying attention to style, even in the most unlikely places. I think as far as humanoid robots go, this one is one of the most attractive. (Yes, it feels strange to say that about a robot!)
I spent several years learning the language, but I also spent some time there as a young adult, and I think it forever changed my sense of cuisine and fashion. There's an immediately recognizable visual elegance (that word keeps coming up) to French design that's different from the sense of style in Italian design. If this were a robot designed by an Italian artist/designer, it would be subtly different.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
