Personal UAVs are the next big toy and physical app. At the University of Warwick, a prototype UAV flew inside structurally unsound, hazardous, or radioactive buildings to identify hazards. Flying in these environments requires superior situational awareness, with the operator relying on onboard cameras operating in low-light conditions. Collisions are always a risk.
The Warwick researchers have come up with a UAV that requires only destination coordinates. The prototype uses an Xsens MTi sensor. Xsens combined its sensor-fusion algorithms and wireless protocols with STMicroelectronics’ iNEMO-M1, 9-axis MEMS to demonstrate a wireless 3-D body motion tracking system based on consumer-grade MEMS combo sensors.
Chips that can be worn like tatoos? Sounds like a variation of Motorola's old BiStatix idea with chips on paper using conductive carbon ink. Whatever happened to that idea?
Personal UAVs have definitely become mainstream with hobbyists as well as the military. With user friendly microcontroller platforms like the Arduino and Raspberry Pi, anyone can participate in this cool aerial technology. I agree with this product being one of the top technologies of 2013. Chris Anderson has quit the Editorial Director job of Wired Magazine to devote his attention fulltime to DIY Drones. Here's a link to DIY Drones. http://diydrones.com/
Charles, Transient Electronics dissolvable tattoos add new meaning to wearable electronics. I wonder if the electronics are susceptible to MRI radiation causing them to explode. Myth Busters did an experiment to investigate if this incident is plausible.http://www.youtube.com/watch?v=AiE3in71YEo
This idea of cloud computing is a significant technology for the inventor who's interested in developing a product without the overhead of equipment. Cloud computing manufacturing makes for an intriguing business model for the service sector. I'm very interested to see how this manufacturing trend turns out for 3D printing industry with companies like MakerBot and Solidoodle who build reasonable machines for small manufacturers, trade schools, and makers. Here's a link to Solidoodle for additional information about their 3D printer. http://www.solidoodle.com/
I can see wireless lighting controlling technologies being a significant contributor for 2013 because of the potential to reduce energy cost. The Philips' Hue Lighting System is a cool interactive control that allows you to select light receipes for various activities and events. In viewing the video, not quite sure how it falls within The Internet of Things concept because of the no data storage capability to the Cloud. Although, the slide says it works with both iOS and Android devices, the Hue Lighting System website says it can be purchased at any Apple Store. Check out the video with this link. www.meethue.com
There's some fascinating stuff here, and I think your predictions are fairly accurate given the activity in various inustries. I personally am excited about developments in solar cells, as I am hoping the use and adoption of alternative energy trends significantly upward this year. It really is the way forward and the way out of fossil-fuel dependence.
I'm with you on the UAV's mrdon - they have great potential for lots of useful applications - thanks for sharing the website. In my opinion, many of these are niche technologies, so for me some are hard to get excited about, but I would imagine if you are in that particular field you would be very excited. Interesting to read about CERN and the laws of physics supposedly being proven with their discovery - it brings back memories of the Super Collider in Waxahachie and the great hopes that were placed there. Not surprising to read about the evolving semiconductor technologies - it is the nature of the beast. As the demands of technology change, semiconductor manufacturers will need to respond with R&D or be left in the dust.
I'm with you on the UAV's mrdon - they have great potential for lots of useful applications - thanks for sharing the website. In my opinion, many of these are niche technologies, so for me some are hard to get excited about, but I would imagine if you are in that particular field you would be very excited. Interesting to read about CERN and the laws of physics supposedly being proven with their discovery - it brings back memories of the Super Collider in Waxahachie and the great hopes that were placed there. Not surprising to read about the evolving semiconductor technologies - it is the nature of the beast. As the demands of technology change, semiconductor manufacturers will need to respond with R&D or be left in the dust.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
