One of the test kites being used to create energy according to a method designed by Nature Technology Systems in Germany makes its first flight. The company -- which partnered with Fraunhofer Institute for Manufacturing Engineering -- said the system it created uses the same principles as wind turbines but is more efficient and environmentally friendly. (Source: Fraunhofer Institute for Manufacturing Engineering and Automation IPA)
I picture it as a long oval track. The kite tacks back and forth to maintain the proper thrust vector. It's the ends of the oval that make the problem interesting. Maybe, if the oval were narrow but long, as the generator car enters the curve the kite begins to tack, pulling it into the curve. generator car momentum would finish the direction reversal.
Eight kites, flying in formation, tacking back and forth, that would be an interesting sight to see.
They tested it first on a straight track but further testing will be done on a looped track to see how that works out. Eventually control of the kites will be automated by a computer. I'm sure the kites themselves in the air are a sight to see! Seems like a rather beautiful way to generate energy.
Very interesting and definately a more aesthetically pleasing energy source! I wonder what their flight ceiling would be and if its regulated...as a model rocket hobbyist, I have been told of the heightened security after 9-11 to include a more restricted flight ceilings. Since this technology is airborne - I wonder if it has to coordinate with the FAA?
Excellent point, Nancy. Since this is just being tested in Germany right now, it remains to be seen if this method comes stateside. I imagine there would be some concerns with air traaffic as well, depending on locations and how high the system can be built.
It might be very similiar to model rocketry protocol - waivers sometimes have to be filed and approved with the FAA and flight patterns have to meet certain criteria. That would probably be a good way to deal with air traffic. We wouldn't want a model rocket crashing through one of those kites!
Liz, thanks for covering this--what fun, how elegant, and I like the lower environmental impact of the technology. While most wind turbines don't go as high, the one we wrote about here http://www.designnews.com/document.asp?doc_id=243636 is designed to eventually achieve over 1,000 feet in altitude.
I wonder if they've thought about potential aircraft collisions. In Illinois, where I live, it's very easy to spot wind turbines at night because wind farms typically have synchronized red lights that blink on and off at night. Could they do the same with kites?
I didn't want to say anything from an aviation standpoint, because that's something I'm a little biased on. Since the door's been opened, I think it's outrageously dangerous to have a kite above 1000' AGL. Yes, there are antennas that reach that high with nice, bright beacons, and one can assume that the kite would be as well lit, but the problem with a kite is that you have no way of knowing where the aluminum shredding tether is going to be. There was a story similar to this before, and I likened the tethered, airborne windmill to a WWII era barrage balloon, and certainly, the effect to a passing aircraft would be similar.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
