HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  RESOURCE CENTER  |  INDUSTRIES
REGISTER   |   LOGIN   |   HELP
Blogs
Blog

'MacGyver' Robot Can Use Found Objects to Solve Problems

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
<<  <  Page 2/3  >  >>
3drob
User Rank
Platinum
Re: science fiction or over-reach
3drob   10/15/2012 11:31:24 AM
NO RATINGS
GlennA, I agree completely.  Even the name "Golem" is a word that has negative connotations (e.g. dumb or helpless). 

It's a nice idea, but I really would NOT like to see an autonomous robot until their cognitive ability is a LOT further along.  And then I wouldn't like to see an autonomous robot because I don't know that I would trust it's motiviation (think Stuxnet).

btwolfe
User Rank
Gold
Re: science fiction or over-reach
btwolfe   10/15/2012 11:42:12 AM
NO RATINGS
GlennA, I have to agree. I didn't believe half of what McGyver did, so I find it even harder to believe a robot can do it. I'm also confused by the specs. The statement "ability to lift 100kg -- the combined weight of its two arms" is confusing. Does this mean the two arms together can lift 100kg and that they also happen to weigh 100kg? I'm familiar with the Schunk LWA 3 (the arms being used on this robot) and I know it can't lift that much (it's more like 6kg).

I think there's a lot of hand waving with the technical capabilites. It'll be interesting to see if they even come close to what's being touted. I suspect most of the work will be in software modelling of the environment and deducing what's relevant to accomplishing a certain task. That alone will consume all $900K. Hope to see great things come from this.

Carmine
User Rank
Iron
Intelligent Headlights?
Carmine   10/15/2012 11:48:29 AM
NO RATINGS
I sure hope its equipped with Intelligent Headlights.  I wouldn't want it blinded by rain or snow as it searches for a "pipe" to lever a smoking HVAC unit off some poor soul.  http://www.designnews.com/document.asp?doc_id=247143  All kidding aside, this sounds way, way out these.  How is this thing supposed to know just how truly fragile humans are to avoid inadvertanyly killing the trapped guy with that "oh-so-handy-and available" pipe?

SparkyWatt
User Rank
Platinum
Re: Robot rescue hero
SparkyWatt   10/15/2012 1:26:29 PM
NO RATINGS
It strikes me that this is more a database application than an algorithm.  Humans, after all, sort through millions of pieces of data to do the MacGyver thing.  From our point of view the concepts:

- A window may be an exit.

- Glass is breakable

- You have to throw a weight to break a window.

- You can't lift more than 45 pounds.

- A chair weighs about 10 pounds.

Are distinct ideas from thousands that we piece together to figure out that we can throw a chair through a window to escape through it.  The big problem here isn't going to be coming up with a clever process for figuring this stuff out.  It is going to be putting together a massive database of simple common facts that can be quickly integrated into plans.

Beth Stackpole
User Rank
Blogger
Re: Robot rescue hero
Beth Stackpole   10/15/2012 1:34:37 PM
NO RATINGS
@SparkyWatt: I agree that this robot is going to have one big data problem on its hands to both amass and process all of the possible scenarios and data points in order to make any kind of informed decision about what solution to try or how exactly to go about fixing a problem. While I hate being negative about any kind of technology exploration, I'd say this is definitely a "work-in-progress."

William K.
User Rank
Platinum
Macgyver robot???
William K.   10/15/2012 3:20:36 PM
NO RATINGS
The difference will be that the robot won't be able to violate all kinds of physical laws and limitations. It will never connect a scuba tank to a garden hose to inflate an air matteres to bust open a hatchway. But a robot that was aware enough of it's surroundings to use a pipe as a lever to pry an object off of somebody would be quite an accomplishment. Of course, that would also be a big accomplishment for a whole lot of our population today. The advantages are clear but the level of creative thinking required is beyond most of our population, and probably beyond all programmers, so it will be amazing to see what gets developed.

The downside is that a robot that smart may want to replace us humans. That could be a problem.

Rob Spiegel
User Rank
Blogger
Re: Please, not MacGyver
Rob Spiegel   10/15/2012 3:41:29 PM
NO RATINGS
Nadine, actually I mixed up MacGyver -- a clever secret agent who worked with gadgets to solve probloems -- with MacGruber, a Saturday Night Live takeoff 

NadineJ
User Rank
Platinum
Re: Please, not MacGyver
NadineJ   10/15/2012 4:21:07 PM
NO RATINGS
Rob, that's an interesting mix up.  But, my comment still stands, even if alone.

Good work doesn't need to be tied to cultural kitsch.

Rob Spiegel
User Rank
Blogger
Re: Please, not MacGyver
Rob Spiegel   10/15/2012 4:28:31 PM
NO RATINGS
You're right about that, Nadine. The robot is a fascinating step forward, even if it requires mammoth tweaking. The ability of the robot to manipulate tools and the ability of the robot to "think" is quite something. 

Watashi
User Rank
Platinum
Re: Macgyver robot???
Watashi   10/15/2012 6:13:12 PM
NO RATINGS
Have we not learned anything from the "Terminator" and "Matrix" franchises? 

Machines turn on humans when they have the cognitive ability to realize that humans actually believed the storylines from MacGyver.

<<  <  Page 2/3  >  >>
Partner Zone
More Blogs
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Researchers from MIT and Harvard have designed a 3D printed robot that crawls like an inchworm and can self-assemble with an electric jolt.
IoT technology has become so prevalent that there’s now a consortium based on the topic.
Huggies TweetPee sends a tweet to your mobile device when your baby's diaper gets wet. Is this necessary?
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
Design News Webinar Series
5/15/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
5/1/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
5/22/2013 9:00 a.m. California / 12:00 p.m. New York / 5:00 p.m. London
5/29/2013 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
Blogs from Our Sponsors
From Dell / Intel®
New Paradigms in Design Work
Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013    3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
From Dell / Intel®
Increased Workstation Performance Is as Easy as 'DPPO'
Trey Morton, Dell, 4/25/2013    2
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
From Dell / Intel®
Taking Some of the Grit out of Manufacturing
Kirsten Billhardt, Manufacturing Industry Marketing Strategist, Dell, 3/26/2013    5
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 20 - 24, Automation Technologies & Trends for Smarter Homes & Buildings
SEMESTERS: 1  |  2  |  3


DN Radio
Sponsored by
NEXT UPCOMING BROADCAST
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2013 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service