The Machine Lab's MMP-30 Mechanical Mobile Platform is used for explosive ordnance disposal in Iraq. It weighs 50 pounds (including control unit), measures about 23 inches long when collapsed, and can be carried in a backpack. Its pan/tilt color infrared camera has 180-degree pan and 150-degree tilt. The robot also sports a color, wide-angle gripper camera and a color, wide-angle rear-facing camera. The four-axis arm has a 20-inch reach and can lift five pounds at full extension. (Source: The Machine Lab)
Battar, thanks for the clarification. Actually, I believe someone else raised that possibility, since I don't tend to think that way. In any case, I think you've made a good point about what, or rather who, our lethalized robots will be fighting.
Ann, you raised to possibility of a future conflict in which unmanned military robots would, in effect, be fighting each other, or more to the point, aasigned to destroy or disable the oppositions' robots (which would be similarly tasked). I'm pointing out the extreme unliklihood of such a scenario, given that the current regimes and organizations which represent a threat to the US are not typically equipped with high-tech weaponry.
Battar, you did make that hypothesis clear. However, I'm not sure how that's connected to the discussion(s) here: can you tell us what the point is you want to make with that hypothesis?
I thought I made it clear that in future conflict military robots would more likely be facing primitvely armed opposition combatants than facing the oppositions robots.
Battar, if you mean suicide bombers, yes, they've been around for some time and we've all heard of them. But I'm not sure what your point is--what do you see as the connection between them and these robots?
Ann, sorry to get political, but from reading the news it is hard not to get the impression that those who are unfriendly towards th US and its' allies are concentrating on autonomous, lethalized humans, not robots. I know of at least one occasion in which a bomb disposal robot was deployed to disarm a suicide bomber who had been shot and wounded, and it was unclear whether he was still cabable of triggering his IED.
Hmmm, that's a good point King DWS: if we're making and deploying weaponized robots and so is the other side, what's the point of robots duking it out with each other? For that matter, I wonder if the weaponized bots are being designed to take out humans or other bots, or both?
Robots turning robots into scrap is A WHOLE LOT BETTER than anything turning ME into garbage! Any day and every time! As for "weaponized " robots, I have seen a small robotic thing with a pair of minicannons mounted and it could carry "quite a few" rounds. That was a while back, and I am not at liberty to provide details, except that it was a US project. That was a serious robot that I would never want to meet up with.
Spears, bow & arrows, swords, catapults, shields, knight's armor, guns, machine guns, etc.... Man has used technology to try to gain a weapon's advantage since the dawn of time. It is not that you assume that your opponent is an idiot, quite the contrary; you assume he is very smart. That is why you have to try to stay one step ahead.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
